Sifting through the cheapies
Sifting through the cheapies
Hello everyone. I am curious as to how many of the cheapies you all go through until you find that one really good one. I just recently purchased a group of high D's - Clare brass two piece, Clare nickel, Walton's Little Black D, Walton's Guiness, Clarke original in natural, and a Clarke Celtic (which I believe is the same as the Sweetone), and out of all of them only the Clarke Celtic sounds good throughout the entire range. I find that the others really seem to fault at the C and C# whereas they sound very fuzzy. Also a couple of them suffered in the upper register. Is the C and C# the most common problems for the less expensive whistles? Do you just keep buying them until you find a good one(s)? I fear that at $5 ~ $10 a pop, and going through quite a few until I find a good one, I could just spend $100 and get a higher quality whistle. What do you all think? Thanks.
- McHaffie
- Posts: 423
- Joined: Sun Aug 05, 2001 6:00 pm
- antispam: No
- Location: Rogersville, MO
- Contact:
There is merit in both really. Yes you could save up your money and purchase a high end whistle that will most likely give you the sound you want, with the added benefit of being able to have it serviced / tweaked by the maker if it arrives and you feel it needs it.
Yes, I would also agree that C/C# is the most common 'failing point' of many of the cheaper whistles, however usually it's worth taking a shot at taking a very close look at the fipple before just tossing them aside.
Many times, because they are mass produced, there will be very minute burrs left over on the cutting edge of the plastic. Many times, you can simply take a very soft emery cloth and carefully smooth those away and solve the buzzing / breaking problems. There are several other tweaking methods all throughout these forums also.
So it really depends on what you like. Want to try tinkering a bit on a cheap whistle to make it sound right? Go for it. Don't want to mess with it? Then I'd just save up a bit and get yourself something nice
Take care,
John
Yes, I would also agree that C/C# is the most common 'failing point' of many of the cheaper whistles, however usually it's worth taking a shot at taking a very close look at the fipple before just tossing them aside.
Many times, because they are mass produced, there will be very minute burrs left over on the cutting edge of the plastic. Many times, you can simply take a very soft emery cloth and carefully smooth those away and solve the buzzing / breaking problems. There are several other tweaking methods all throughout these forums also.
So it really depends on what you like. Want to try tinkering a bit on a cheap whistle to make it sound right? Go for it. Don't want to mess with it? Then I'd just save up a bit and get yourself something nice
Take care,
John
"Remember... No matter where you go... there you are..."
-Buckaroo Banzai
-Buckaroo Banzai
- Ceili_whistle_man
- Posts: 597
- Joined: Mon Oct 29, 2007 8:14 pm
- Please enter the next number in sequence: 1
- Location: Australia, ex Belfast, Norn Iron.
Hi synergy,
depending on your playing experience, a lot of those cheapie whistles that are around usually are not that far off tune that they can't be blown into tune with the right breath control. Personally, if I try a whistle that requires me to be continually adjusting my breath every second note or more, then I don't want that whistle. I don't mind having to adjust one flat/sharp note here and there but if there are more than three notes out, for me it is a dud and I won't buy.
It usually takes me a couple of minutes playing (if the seller lets me play the thing anyway) to figure out how far the whistle needs to be blown flat/sharp to bring it into tune. I then make a decision based on that.
Most of the cheapies I own are pretty well in tune, but most of them will blow slightly out of tune on certain notes if I play with the same consistant blow across a scale.
It is the little breath adjustments that can bring slightly off whistles back to a reasonable sounding tone and close to being right on key.
depending on your playing experience, a lot of those cheapie whistles that are around usually are not that far off tune that they can't be blown into tune with the right breath control. Personally, if I try a whistle that requires me to be continually adjusting my breath every second note or more, then I don't want that whistle. I don't mind having to adjust one flat/sharp note here and there but if there are more than three notes out, for me it is a dud and I won't buy.
It usually takes me a couple of minutes playing (if the seller lets me play the thing anyway) to figure out how far the whistle needs to be blown flat/sharp to bring it into tune. I then make a decision based on that.
Most of the cheapies I own are pretty well in tune, but most of them will blow slightly out of tune on certain notes if I play with the same consistant blow across a scale.
It is the little breath adjustments that can bring slightly off whistles back to a reasonable sounding tone and close to being right on key.
Whale Oil Beef Hooked!
Thanks for the replies all. Yeah, a little out of tune I can live with because as stated it can be blown back in tune. However, it's the notes that don't come though at all that don't even sound musical - hence the bad C and C# - which is what I'm referring to more. Another bad thing is that my local music shop doesn't stock whistles so I have to mail order. It would be nice to be able to try them at the store before buying to find the good ones. My kids just say, "but dad you just gave me two whistles last week . . ."
I'll have to look for the plastic flash and burrs left behind from manufacturing to see if I can eliminate some of these problems, thanks.
I'll have to look for the plastic flash and burrs left behind from manufacturing to see if I can eliminate some of these problems, thanks.
- Ceili_whistle_man
- Posts: 597
- Joined: Mon Oct 29, 2007 8:14 pm
- Please enter the next number in sequence: 1
- Location: Australia, ex Belfast, Norn Iron.
I find that the Cnat/C# are usually the most 'off' note on the many cheap whistles I've tried.
I know that cross fingering these notes can most times cure the problem but if I cant get the Cnat by either playing oxxooo or half-holing on the top hole, I won't bother buying.
For the most part they will do a reasonable job for little outlay of cash, it is just the fact that you will bypass many to get that elusive one that is almost in tune and needs almost no tweaking to make them into nice whistles.
Cleaning up all those little burrs and taking a little bit of the sharpness of the leading edge of the blade can make a very big difference to the cleanness of the sound on many cheapies and can alleviate the squeaks and accidental octave jumps.
I know that cross fingering these notes can most times cure the problem but if I cant get the Cnat by either playing oxxooo or half-holing on the top hole, I won't bother buying.
For the most part they will do a reasonable job for little outlay of cash, it is just the fact that you will bypass many to get that elusive one that is almost in tune and needs almost no tweaking to make them into nice whistles.
Cleaning up all those little burrs and taking a little bit of the sharpness of the leading edge of the blade can make a very big difference to the cleanness of the sound on many cheapies and can alleviate the squeaks and accidental octave jumps.
Whale Oil Beef Hooked!
- kennychaffin
- Posts: 581
- Joined: Sun Apr 06, 2008 7:27 pm
- Please enter the next number in sequence: 1
- Location: Aurora, CO
I'd suggest a Dixon Traditional -- not the cheapest of the cheapies, but a great sound and tuneable.
Kenny A. Chaffin
Photos: http://www.kacweb.com/cgibin/emAlbum.cgi
Art: http://www.kacweb.com/pencil.html
"Strive on with Awareness" - Siddhartha Gautama
Photos: http://www.kacweb.com/cgibin/emAlbum.cgi
Art: http://www.kacweb.com/pencil.html
"Strive on with Awareness" - Siddhartha Gautama
- Biggie
- Posts: 29
- Joined: Sun Oct 28, 2007 4:50 pm
- Please enter the next number in sequence: 1
- Location: Payson, Arizona
I disagree. I have a Feadog D in Nickel and a Feadog C in brass. I consider both to sound horrible.Adrian wrote:If you want some reliable in-tune cheapies then order Feadog nickel whistles in D and C.
They both sound real tinny (as opposed to rich). As far as being in-tune, the D (Nickel) is fairly good, the C (Brass) has some issues. Like I said though, while the sound is in-tune, its quality is horrible.
-Biggie
- FJohnSharp
- Posts: 3050
- Joined: Thu May 30, 2002 6:00 pm
- antispam: No
- Please enter the next number in sequence: 8
- Tell us something.: I used to be a regular then I took up the bassoon. Bassoons don't have a lot of chiff. Not really, I have always been a drummer, and my C&F years were when I was a little tired of the drums. Now I'm back playing drums. I mist the C&F years, though.
- Location: Kent, Ohio
- riverman
- Posts: 692
- Joined: Sun Nov 06, 2005 4:05 pm
- Please enter the next number in sequence: 1
- Location: Eel River, Indiana
You already have the answer; you said the Clarke is good. I have never been disappointed in a Clarke Original or Meg (never owned a Sweetone).
I believe, instead of continuing to buy cheapies, it might be wise to play the Clarke and save your bucks for one of the custom whistles they rave about on this message board.
I believe, instead of continuing to buy cheapies, it might be wise to play the Clarke and save your bucks for one of the custom whistles they rave about on this message board.
"Whoever comes to me I will never drive away." --Jesus Christ.
- PhilO
- Posts: 2931
- Joined: Wed Jun 27, 2001 6:00 pm
- Please enter the next number in sequence: 1
- Location: New York
I just don't get this...am I the only one who's had really good luck with cheapies? I own about 30 cheapies in keys from high F to Bflat and all play nicely - Clarkes, Gens, Clares, Shaws, Waltons, Sudlums, Faedogs, Oaks, Perris, Susatos, Sweetones (which I like the least). And yes I have twice that many higher enders, only difference being appearance, workmanship and in most cases perhaps a bit more fullness or body or richness of sound overall.
Here's what I'm getting at - do people sit around doing scales and evaluating these whistles or put them to a tuner and determine them "off" if they're a certain amount sharp or flat, or are they really playing them and noting really discordant stuff coming out the end of the little guys without being able to blow them into tune? What?
Or am I just hungry, working too hard, and ready for that vacation?
Philo
Here's what I'm getting at - do people sit around doing scales and evaluating these whistles or put them to a tuner and determine them "off" if they're a certain amount sharp or flat, or are they really playing them and noting really discordant stuff coming out the end of the little guys without being able to blow them into tune? What?
Or am I just hungry, working too hard, and ready for that vacation?
Philo
"This is this; this ain't something else. This is this." - Robert DeNiro, "The Deer Hunter," 1978.
- CrazedHavoc
- Posts: 115
- Joined: Wed Aug 06, 2008 5:47 pm
- antispam: No
- Please enter the next number in sequence: 10
- Location: Wisconsin
- Contact:
Well, i haven't had any problem with my Little Black D or my mellow D or my susato as far as being in tune. The Cnat and C# on them were a little bit harder to get right but you really have to work on it. It's all a matter of breath control, and your embochure. (Sorry if i'm wrong because i'm not sure if that's a whistling term or not, i am used to it from playing flute)PhilO wrote: Here's what I'm getting at - do people sit around doing scales and evaluating these whistles or put them to a tuner and determine them "off" if they're a certain amount sharp or flat, or are they really playing them and noting really discordant stuff coming out the end of the little guys without being able to blow them into tune? What?
Or am I just hungry, working too hard, and ready for that vacation?
Philo
"The death of beauty is just not possible even amongst all of the ugliness that is and can be."
- Mick Down Under
- Posts: 288
- Joined: Tue Jul 22, 2008 3:59 am
- Please enter the next number in sequence: 1
- Location: Redcliffe, QLD
I have a whole set of Generations and the only one that has given me any trouble, real trouble, is the Bb, and that may still just be me but I don't think so at this stage. It has one off note that just will not be blown to anything even resembling a note.
A pity because I like it apart from that one note. Perhaps I'll just get another some time to compare...
Mick
A pity because I like it apart from that one note. Perhaps I'll just get another some time to compare...
Mick
Such is life...
Ned Kelly just before the b#sta*rds hung him!
Ned Kelly just before the b#sta*rds hung him!
No. I bought an Acorn and have been happy ever since.PhilO wrote:am I the only one who's had really good luck with cheapies?
Of course, I don't have perfect pitch and I don't bother blowing into a tuner. I just play tunes. The more I play it the better it works, too.
~ Diane
Flutes: Tipple D and E flutes and a Casey Burns Boxwood Rudall D flute
Whistles: Jerry Freeman Tweaked D Blackbird
Flutes: Tipple D and E flutes and a Casey Burns Boxwood Rudall D flute
Whistles: Jerry Freeman Tweaked D Blackbird