Hello,
Is there a place that has precut to size cork for flutes and fifes?
Any recommendations?
Where to buy good cork?
- Dragon
- Posts: 170
- Joined: Tue Nov 05, 2002 6:00 pm
- Please enter the next number in sequence: 1
- Location: Far above the clouds
Where to buy good cork?
“The flute is not an instrument that has a good moral effect; it is too exciting.”
~Aristotle
~Aristotle
- Loren
- Posts: 8393
- Joined: Fri Jun 29, 2001 6:00 pm
- antispam: No
- Please enter the next number in sequence: 8
- Tell us something.: You just slip out the back, Jack
Make a new plan, Stan
You don't need to be coy, Roy
Just get yourself free
Hop on the bus, Gus
You don't need to discuss much
Just drop off the key, Lee
And get yourself free - Location: Loren has left the building.
- Dragon
- Posts: 170
- Joined: Tue Nov 05, 2002 6:00 pm
- Please enter the next number in sequence: 1
- Location: Far above the clouds
All a google search came up with was wine sites....do you have a website you go to to get replacment corks?
Loren wrote:I'd recommend Ernest and Julio Gallo, but I think they switched to screw caps quite some time ago......
Loren
“The flute is not an instrument that has a good moral effect; it is too exciting.”
~Aristotle
~Aristotle
- Jack Bradshaw
- Posts: 933
- Joined: Thu May 01, 2003 2:49 pm
- Please enter the next number in sequence: 1
- Location: Hampstead, NH
- Contact:
I have a "Harvey's Bristol Cream" on one flute which seems to work pretty well......
603/329-7322
"I fail to see why doing the same thing over and over and getting the
same results every time is insanity: I've almost proved it isn't;
only a few more tests now and I'm sure results will differ this time ... "
"I fail to see why doing the same thing over and over and getting the
same results every time is insanity: I've almost proved it isn't;
only a few more tests now and I'm sure results will differ this time ... "
Not a joke... I drink a fair regular bit of wine.
I have a huge ziploc bag full. Just be careful when you pull the cork... don't screw all the the way through and you'll be able to use at least half it.
Sand to shape/fit.
Free corks!
Spanish and Portugese wines often have good corks.
Many synthetics and a lot are going to screwtops but plenty out there.
I have a huge ziploc bag full. Just be careful when you pull the cork... don't screw all the the way through and you'll be able to use at least half it.
Sand to shape/fit.
Free corks!
Spanish and Portugese wines often have good corks.
Many synthetics and a lot are going to screwtops but plenty out there.
Aanvil
-------------------------------------------------
I am not an expert
-------------------------------------------------
I am not an expert
- Dragon
- Posts: 170
- Joined: Tue Nov 05, 2002 6:00 pm
- Please enter the next number in sequence: 1
- Location: Far above the clouds
You mean...I am going to have to sand a bit of cork into a nice round shape. Oh. great, I can see myself taking to much off one side then the other side...then the other side... ending up with a cork that could fit a x-mass tree ornament.
Sigh.
Sigh.
Aanvil wrote:Not a joke... I drink a fair regular bit of wine.
I have a huge ziploc bag full. Just be careful when you pull the cork... don't screw all the the way through and you'll be able to use at least half it.
Sand to shape/fit.
Free corks!
Spanish and Portugese wines often have good corks.
Many synthetics and a lot are going to screwtops but plenty out there.
“The flute is not an instrument that has a good moral effect; it is too exciting.”
~Aristotle
~Aristotle
- I.D.10-t
- Posts: 7660
- Joined: Wed Dec 17, 2003 9:57 am
- antispam: No
- Location: Minneapolis, MN, USA, Earth
Good restaurants usually have corks left over from their wine, try asking. Hardware stores often sell corks but they are almost always tapered and are more expensive than free. I still do not understand why corks are used instead of a hard wood plug with a cork wrapping like the Healy fife's “cork”. I have found that when I use cork for other projects that even if it is not perfect in shape, it has a certain give to it and that rolling it with a bit of pressure, much like using a cork press, helps to smooth things out. (I do not know if this would cause unwanted pressure in the long run though.)
Good luck.
Good luck.
"Be not deceived by the sweet words of proverbial philosophy. Sugar of lead is a poison."
Dragon wrote:You mean...I am going to have to sand a bit of cork into a nice round shape. Oh. great, I can see myself taking to much off one side then the other side...then the other side... ending up with a cork that could fit a x-mass tree ornament.
Sigh.
Yes... that is exactly what Im suggesting. Its already round to start with a its not that hard. Its cork!
Hey now, where is your sense of adventure?
Send it to be repaired if you don't want to fuss with it.
Aanvil
-------------------------------------------------
I am not an expert
-------------------------------------------------
I am not an expert