Question on 8 key flute
Question on 8 key flute
Hi, I'm a new user of this wonderful forum and a new ab-user of ITM. I play already the boehm system flute and I'd like to switch to a simple system. I'd prefer to get an 8 key since I may be playing other music on it. I read in other threads some info about the wheres and hows of getting an Irish flute, and I saw there are many makers out there that seem to offer very good products: the only negative side seems to be the wait. I was wandering if there is a market for second hand 8 key flute (all the flute I see FS are keyless or 6 keys at the most). I would be interested in a Murray or a Grinter. Any idea of what price and availability for a second hand might be?
Thank you
Thank you
Terry
- BrendanB
- Posts: 242
- Joined: Sat Jul 05, 2003 3:56 pm
- Please enter the next number in sequence: 1
- Location: Washington DC
Re: Question on 8 key flute
Hey Terry,
There is a secondary market for 8 keyed flutes, but as you have probably already noticed, it isn't common. There are a lot more keyless flutes for sale, since a lot of people start off on a keyless and then wait for a keyed flute. Once they get their keyed flute, they sell the keyless. For most people, once they have a fully keyed flute from a maker they like, that's going to be their flute for a long time.
So, if you want to get your hands on an 8 keyed flute, you have a few options. 1) You can get on a maker's list and wait it out, 2) You can ask around the boards to see if anyone is selling a modern 8 keyed flute, or 3) you can look at getting an antique flute. To be honest, you are probably going to have the best luck with option #3. There seem to be more antique 8-keyed flutes for sale than modern flutes.
You are probably also going to have to be more flexible in terms of the makers you are interested in. For instance, I don't believe Sam Murray makes fully keyed flutes - although Grinter does. Someone can correct me if this is wrong, but I believe Murray only does up to 6 keys. Overall, there are certainly fewer makers who do all eight keys, since the low C# and C keys are hard to make and time consuming.
Short answer is that it is going to take some time and you are going to pay a fair amount of money for the flute. One option to think about is you may want to get a keyless flute to play Irish music and keep your Boehm flute for other kinds of music.
Hope that helps
Brendan
There is a secondary market for 8 keyed flutes, but as you have probably already noticed, it isn't common. There are a lot more keyless flutes for sale, since a lot of people start off on a keyless and then wait for a keyed flute. Once they get their keyed flute, they sell the keyless. For most people, once they have a fully keyed flute from a maker they like, that's going to be their flute for a long time.
So, if you want to get your hands on an 8 keyed flute, you have a few options. 1) You can get on a maker's list and wait it out, 2) You can ask around the boards to see if anyone is selling a modern 8 keyed flute, or 3) you can look at getting an antique flute. To be honest, you are probably going to have the best luck with option #3. There seem to be more antique 8-keyed flutes for sale than modern flutes.
You are probably also going to have to be more flexible in terms of the makers you are interested in. For instance, I don't believe Sam Murray makes fully keyed flutes - although Grinter does. Someone can correct me if this is wrong, but I believe Murray only does up to 6 keys. Overall, there are certainly fewer makers who do all eight keys, since the low C# and C keys are hard to make and time consuming.
Short answer is that it is going to take some time and you are going to pay a fair amount of money for the flute. One option to think about is you may want to get a keyless flute to play Irish music and keep your Boehm flute for other kinds of music.
Hope that helps
Brendan
- Cubitt
- Posts: 1255
- Joined: Wed Mar 07, 2007 2:58 pm
- Please enter the next number in sequence: 1
- Location: Culver City, CA
Re: Question on 8 key flute
Brendan has given absolutely excellent advice, so I will just chime in from my own perspective:
I absolutely love my eight-key, which happens to be an antique - my online name is the name of the maker. Once you go 8-key, you don't go back.
I won't bore you with how I got mine (although there is a story), but I can tell you the my friend, who posts here as Aanvil, is becoming quite the collector and has picked up some real gems. Perhaps he will reply here. It's worth the hunt, and the experience will be enlightening. I wouldn't get too hung up on maker until you know more. For every flute that has its fans, you will find those who hate them. Play as many as you can get your hands on, even keyless, so you know the basic design you want. And keep your eye on eBay!
If you're lucky enough to get something from one of the members here, you probably won't have any problem sending it back if you are not satisfied, which is the only way I'd buy a flute I hadn't played.
Good luck!
I absolutely love my eight-key, which happens to be an antique - my online name is the name of the maker. Once you go 8-key, you don't go back.
I won't bore you with how I got mine (although there is a story), but I can tell you the my friend, who posts here as Aanvil, is becoming quite the collector and has picked up some real gems. Perhaps he will reply here. It's worth the hunt, and the experience will be enlightening. I wouldn't get too hung up on maker until you know more. For every flute that has its fans, you will find those who hate them. Play as many as you can get your hands on, even keyless, so you know the basic design you want. And keep your eye on eBay!
If you're lucky enough to get something from one of the members here, you probably won't have any problem sending it back if you are not satisfied, which is the only way I'd buy a flute I hadn't played.
Good luck!
"In times of trial, swearing often provides a solace denied even to prayer." - Mark Twain
- jemtheflute
- Posts: 6969
- Joined: Tue May 23, 2006 6:47 am
- antispam: No
- Please enter the next number in sequence: 8
- Location: N.E. Wales, G.B.
- Contact:
Re: Question on 8 key flute
Spot on advice from Brendan, with the one caveat from me that if you think you want the keys it is best to convert directly to them rather than doing a double re-learning process through a keyless stage. Buying unrestored antiques from eBay or even from dealers is a bit fraught if you don't know the ropes - you can get bargains, but they may need a good deal of work to make usable, or you may waste your money on something duff. But there are ways........
PM sent.
PM sent.
I respect people's privilege to hold their beliefs, whatever those may be (within reason), but respect the beliefs themselves? You gotta be kidding!
My YouTube channel
My FB photo albums
Low Bb flute: 2 reels (audio)
Flute & Music Resources - helpsheet downloads
My YouTube channel
My FB photo albums
Low Bb flute: 2 reels (audio)
Flute & Music Resources - helpsheet downloads
Re: Question on 8 key flute
A thought, FWIW.
You may wish to consider carefully what other music you will play.
Others here may be better situated than I on this matter,
and my impression is this--the Boehm flute, which you already
play, may be far more agile and easy to play for classical music,
jazz, and so on. This is part of the reason it replaced 8-keyed
flutes, in fact.
At the end of the day, even with an 8-key, you may find yourself
playing the Boehm for this 'other' music. If so, you can spare yourself
some trouble and perhaps considerable expense by getting
a 6 key flute--there are some good ones available on Doc Jones's
site (The Irish Flute Store) right now.
Irish flutes rule for ITM, no question.
You may wish to consider carefully what other music you will play.
Others here may be better situated than I on this matter,
and my impression is this--the Boehm flute, which you already
play, may be far more agile and easy to play for classical music,
jazz, and so on. This is part of the reason it replaced 8-keyed
flutes, in fact.
At the end of the day, even with an 8-key, you may find yourself
playing the Boehm for this 'other' music. If so, you can spare yourself
some trouble and perhaps considerable expense by getting
a 6 key flute--there are some good ones available on Doc Jones's
site (The Irish Flute Store) right now.
Irish flutes rule for ITM, no question.
Re: Question on 8 key flute
Welcome!terry68 wrote:Hi, I'm a new user of this wonderful forum and a new ab-user of ITM. I play already the boehm system flute and I'd like to switch to a simple system. I'd prefer to get an 8 key since I may be playing other music on it...
It's entirely possible to play ITM on a Boehm flute, although a simple system flute is traditional, for a number of good reasons.
Let me ask, please, in addition to ITM what other music could you have in mind?
BTW, I enjoy all sorts of music, from around the world.
- LorenzoFlute
- Posts: 2103
- Joined: Sun Oct 01, 2006 7:46 am
- antispam: No
- Please enter the next number in sequence: 8
- Location: Berlin, Germany
Re: Question on 8 key flute
Flute maker Terry McGee might have some keyed flutes ready for sale...
Antique 6 key French flute for sale: viewtopic.php?f=2&t=102436
youtube channel: http://www.youtube.com/user/LorenzoFlute
youtube channel: http://www.youtube.com/user/LorenzoFlute
- s1m0n
- Posts: 10069
- Joined: Wed Oct 06, 2004 12:17 am
- antispam: No
- Please enter the next number in sequence: 10
- Location: The Inside Passage
Re: Question on 8 key flute
The present economic climate is, sadly, drawing some instruments onto the market whose owners would perhaps have preferred not to have to sell, but that does mean that someone with the wherewithall to buy might find a bargain or two by waiting and sniping.
And now there was no doubt that the trees were really moving - moving in and out through one another as if in a complicated country dance. ('And I suppose,' thought Lucy, 'when trees dance, it must be a very, very country dance indeed.')
C.S. Lewis
C.S. Lewis
- libraryman
- Posts: 209
- Joined: Fri Jul 04, 2008 9:48 pm
- Please enter the next number in sequence: 1
- Location: falls church virginia
Re: Question on 8 key flute
My limited experience is that the low C and C# keys on D flutes don't often work very well. The notes are weak--if they sound at all. I visited Patrick Olwell's shop and asked him about that. Patrick is an incredible player with unbelievable power and a fantastic collection of antique instruments. He played a few 8-keyed flutes for me and a few had passable low notes, but not too many. It was a cold day and he hadn't had a chance to warm the flutes he played up, so maybe that demonstration has to be taken with a grain of salt. But my point is that I'd be very cautious about spending a lot for an 8-keyed flute because you think you will then have those 2 bottom notes.
But I understand why you'd like to have a flute that could handle more than just ITM. I'm in the same position and what I'm doing is saving up for a nice 4-keyed C flute to add to my two keyed D flutes. That should allow me to play with singers in the common key of C more easily than struggling with those bottom notes on an 8-keyed D flute and i think two 4-keyed flutes probably cost about what one good 8-keyed D flute would.
But I understand why you'd like to have a flute that could handle more than just ITM. I'm in the same position and what I'm doing is saving up for a nice 4-keyed C flute to add to my two keyed D flutes. That should allow me to play with singers in the common key of C more easily than struggling with those bottom notes on an 8-keyed D flute and i think two 4-keyed flutes probably cost about what one good 8-keyed D flute would.
- peeplj
- Posts: 9029
- Joined: Mon Jan 21, 2002 6:00 pm
- Please enter the next number in sequence: 1
- Location: forever in the old hills of Arkansas
- Contact:
Re: Question on 8 key flute
Just to further confuse the issue with facts...
Some historical flutes didn't have the low C# and C. 6-key flutes were not as common as 8-key flutes, but, going by memory, I think it was the French makers who produced quite a few of them.
In modern times, although there is still the trend to push the bottom range of the flute down further and further--I have seen a photo of a Boehm-system flute that went down to the A below middle C!--some players still feel like having the "long foot" with the C# and C makes the whole flute stuffy and less responsive. There are several modern makers who offer the option of a D foot on some very high-end Boehm-system instruments.
I play quite a bit of "art music"--especially Baroque--on my Hamilton 6-key, in addition to ITM. It's rare that I miss not having the low C# and C.
Although I would love to someday work out Syrinx on a simple system instrument...I think it would sound awesome on a wooden flute!...and I won't be able to on that flute. That's my only major complaint.
--James
Some historical flutes didn't have the low C# and C. 6-key flutes were not as common as 8-key flutes, but, going by memory, I think it was the French makers who produced quite a few of them.
In modern times, although there is still the trend to push the bottom range of the flute down further and further--I have seen a photo of a Boehm-system flute that went down to the A below middle C!--some players still feel like having the "long foot" with the C# and C makes the whole flute stuffy and less responsive. There are several modern makers who offer the option of a D foot on some very high-end Boehm-system instruments.
I play quite a bit of "art music"--especially Baroque--on my Hamilton 6-key, in addition to ITM. It's rare that I miss not having the low C# and C.
Although I would love to someday work out Syrinx on a simple system instrument...I think it would sound awesome on a wooden flute!...and I won't be able to on that flute. That's my only major complaint.
--James
http://www.flutesite.com
-------
"Though no one can go back and make a brand new start, anyone can start from now and make a brand new ending" --Carl Bard
-------
"Though no one can go back and make a brand new start, anyone can start from now and make a brand new ending" --Carl Bard
- jemtheflute
- Posts: 6969
- Joined: Tue May 23, 2006 6:47 am
- antispam: No
- Please enter the next number in sequence: 8
- Location: N.E. Wales, G.B.
- Contact:
Re: Question on 8 key flute
Libraryman - while I concede those notes/their mechanism can be problematic, I have done pretty well so far at getting both pewter plug and padded varieties of "grasshopper" low C/C# keys to work well and reliably on most of the flutes with them that I have done up. On my own R&R they work very well. My experience is that the bad rep they have both in their own time and more recently isn't really deserved if you have the patience to set them up just so. Embouchure technique to support those notes is also an issue......
I respect people's privilege to hold their beliefs, whatever those may be (within reason), but respect the beliefs themselves? You gotta be kidding!
My YouTube channel
My FB photo albums
Low Bb flute: 2 reels (audio)
Flute & Music Resources - helpsheet downloads
My YouTube channel
My FB photo albums
Low Bb flute: 2 reels (audio)
Flute & Music Resources - helpsheet downloads
- Rob Sharer
- Posts: 1682
- Joined: Tue Jul 18, 2006 7:32 am
- Please enter the next number in sequence: 1
- Location: Either NC, Co. Clare, or Freiburg i.B., depending...
Re: Question on 8 key flute
Further to what Jem says, and having spent loads of time in the Olwell shop, I wouldn't be too quick to judge the totality of 8-keys by the state of a few examples lying around in Nellysford! I've never detected that the Olwells are particularly fond of pewter plugs, and I don't think they bother too much with them, unlike Chris Wilkes who has made a life study of getting them to work properly. Not that Patrick couldn't tweak one properly, but I identify him as a pragmatist whose priorties may lie elsewhere.
Hard to beat a properly-working set of plugs! Cheers,
Rob
Hard to beat a properly-working set of plugs! Cheers,
Rob
- johnkerr
- Posts: 1001
- Joined: Wed Apr 17, 2002 6:00 pm
- Please enter the next number in sequence: 1
- Location: Falls Church VA USA
Re: Question on 8 key flute
A couple of years ago I bought a Rudall and Rose flute from Patrick Olwell, one that he'd been playing himself for a while (as opposed to having it just sitting around the shop). He did a little bit of tweaking on it before he handed it over to me, but not all that much, and when he gave it to me it was with the caveat that the low C/C# keys didn't really sound. I was okay with that, but just in the course of my initial playing of the flute I rolled the foot joint in a bit to make it easier to push firmly on those keys with my little finger and discovered that the plugs actually sealed very well and the notes sounded great. My point here is not to say that Patrick didn't care or that he didn't know what he was doing there, but instead to point out that even in their optimal state those two keys are the most finicky notes on the flute. You have to have your embouchure in its best low D form and on top of that have the flute put together such that you can firmly push those keys down and seal the plugs. Even on the best flute, those keys are definitely not "plug and play". "Use them or lose them" is the much better watchword there. But as Rob says, when they're working they're brilliant things to have.Rob Sharer wrote:Further to what Jem says, and having spent loads of time in the Olwell shop, I wouldn't be too quick to judge the totality of 8-keys by the state of a few examples lying around in Nellysford! I've never detected that the Olwells are particularly fond of pewter plugs, and I don't think they bother too much with them, unlike Chris Wilkes who has made a life study of getting them to work properly. Not that Patrick couldn't tweak one properly, but I identify him as a pragmatist whose priorties may lie elsewhere.
Re: Question on 8 key flute
The two low keys on the Grinter 8-key worked well.
They were plugs, not pads, but I don't know if they were made
of pewter.
They were plugs, not pads, but I don't know if they were made
of pewter.
Re: Question on 8 key flute
I'd agree that if you set them up just right and play them just right, you can get reasonable results from many of the C/C# keys, but most of the designs are rather unforgiving in terms of how you play, and can get out of adjustment too easily. The problem with most antique and modern (but non-Boehm) designs is in the location of the pivot pins. You basically have a lever with a mechanical disadvantage of around 3 to 1. So when you depress the key touch, the plug or pad moves about 3 times as far, but exerts only about a third of the force. This means that you have to press down pretty hard on the touch to transmit enough force to seal the hole. Any mis-adjustment of the pad or plug means that you probably need more force than your pinky finger can comfortably generate. Another problem is that you tend to shift your other fingers slightly to get enough leverage with the pinky finger, and this shifting can move some of the other keys (typically the short F and the long C natural) enough to generate air leaks. There are some modern designs where the blocks and the pivot locations have been changed to provide a more friendly lever arrangement and the ones I have tried seem to work quite a bit better.jemtheflute wrote:Libraryman - while I concede those notes/their mechanism can be problematic, I have done pretty well so far at getting both pewter plug and padded varieties of "grasshopper" low C/C# keys to work well and reliably on most of the flutes with them that I have done up. On my own R&R they work very well. My experience is that the bad rep they have both in their own time and more recently isn't really deserved if you have the patience to set them up just so. Embouchure technique to support those notes is also an issue......
Dave Copley
Loveland Ohio