Only a few hours to go but just spotted this - £180.00 UK Pounds and rising
http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... :IT&ih=016
Can have custom beds made to suit other types of reeds
Photos added
John
Reed Making Machine
- djm
- Posts: 17853
- Joined: Sat May 31, 2003 5:47 am
- Please enter the next number in sequence: 1
- Location: Canadia
- Contact:
Re: Reed Making Machine
Used for oboe or bassoon reeds. These have been discussed here many times.
djm
djm
I'd rather be atop the foothills than beneath them.
Re: Reed Making Machine
Yes DJM it has been talked about before but the post was just highlighting that one was available on Ebay for a fraction of the new cost and that you can order a new bed for ANY type of double (and probably single clarinet/sax) reed so it is suitable for UP's as well as Oboe, Bassoon etc.
As has been said before many times read the posting and try to understand it before replying.
If you are just going to post purile one liners to boost your impressive number of postings try to do it where it will be useful. Think of the practice time 16768 postings has taken up. At even 1 minute average per post it adds up to 279 hours / 11 full days @ 24/7 and it is probably a lot more than this. You only get one life so get out into the real world and make the most of it instead of sitting in front of your PC all day long waiting to up your score
John
As has been said before many times read the posting and try to understand it before replying.
If you are just going to post purile one liners to boost your impressive number of postings try to do it where it will be useful. Think of the practice time 16768 postings has taken up. At even 1 minute average per post it adds up to 279 hours / 11 full days @ 24/7 and it is probably a lot more than this. You only get one life so get out into the real world and make the most of it instead of sitting in front of your PC all day long waiting to up your score
John
- Joseph E. Smith
- Posts: 13780
- Joined: Sat Mar 06, 2004 2:40 pm
- antispam: No
- Location: ... who cares?...
- Contact:
Re: Reed Making Machine
Let's play a little nicer shall we?