Flute mop on-line seller in US?
- dwinterfield
- Posts: 1768
- Joined: Mon Jul 19, 2004 5:46 am
- Please enter the next number in sequence: 1
- Location: Boston
Flute mop on-line seller in US?
I feel really dumb asking this but sometimes the smallest bits of info can be the most elusive.
As I start to fool around with a wooden flute in addition to a whistle, I'm becoming more aware of the importance of drying, cleaning and oiling.
I've been looking around for the proper tools. Until today, I never knew that multi-colored squiggly thing was called a "mop". After not finding them (for months) by seaching google for flute cleaning kit, cleaning swab etc, I now find lots of sellers. And they all seem to be in UK or Australia. Nothing against them, but postage doubles the price.
So my question is this - Are there on-line vendors on the US who offer a variety of drying/cleaning/oiling implements, materials, supplies etc, individually and/or in kits?
I'm ready to move beyond bent bits of wire and dowels, shredded paper towels and almond oil from the health food store. One day, I'll move on to humidity control, but I've seen threads here that discuss this subject at great length, so I know where to look.
Suggestions welcome. Thanks
As I start to fool around with a wooden flute in addition to a whistle, I'm becoming more aware of the importance of drying, cleaning and oiling.
I've been looking around for the proper tools. Until today, I never knew that multi-colored squiggly thing was called a "mop". After not finding them (for months) by seaching google for flute cleaning kit, cleaning swab etc, I now find lots of sellers. And they all seem to be in UK or Australia. Nothing against them, but postage doubles the price.
So my question is this - Are there on-line vendors on the US who offer a variety of drying/cleaning/oiling implements, materials, supplies etc, individually and/or in kits?
I'm ready to move beyond bent bits of wire and dowels, shredded paper towels and almond oil from the health food store. One day, I'll move on to humidity control, but I've seen threads here that discuss this subject at great length, so I know where to look.
Suggestions welcome. Thanks
- OddMountain
- Posts: 5
- Joined: Sat Nov 05, 2005 8:11 am
- Please enter the next number in sequence: 1
- Contact:
Here's a flute swab from Musician's Friend, which I've ordered from before.
Being in Boston, I don't think you'd have a problem finding a
brick-and-morter seller, though. Any store that sells instruments to
school children will have swabs and "PadSavers".
(Incidentally, here's a cute whistle-sized version at elderly.com)
Being in Boston, I don't think you'd have a problem finding a
brick-and-morter seller, though. Any store that sells instruments to
school children will have swabs and "PadSavers".
(Incidentally, here's a cute whistle-sized version at elderly.com)
- greenspiderweb
- Posts: 1974
- Joined: Sat Jan 24, 2004 5:23 pm
- antispam: No
- Please enter the next number in sequence: 10
- Location: SE PA near Philly
There's another place called Doctor's Products, who makes a fairly popular bore oil called Bore Doctor. They are chiefly geared to clarinets and oboes, but many fluters have used them also.
They have an oiling kit too, that looks pretty nice, along with a lot of other interesting stuff. Lots of research it seems have gone into their products and you can read all about it there:
http://www.doctorsprod.com/accessories2.html
That will get you to the accessories page with the oiling kit, and you can find the index at the bottom of the page to navigate the site.
They have an oiling kit too, that looks pretty nice, along with a lot of other interesting stuff. Lots of research it seems have gone into their products and you can read all about it there:
http://www.doctorsprod.com/accessories2.html
That will get you to the accessories page with the oiling kit, and you can find the index at the bottom of the page to navigate the site.
~~~~
Barry
Barry
- dow
- Posts: 954
- Joined: Tue Dec 02, 2003 12:21 am
- antispam: No
- Please enter the next number in sequence: 12
- Location: Boerne, TX
Or you can go to the sporting goods department at Walmart, or yourgreenspiderweb wrote:There's another place called Doctor's Products, who makes a fairly popular bore oil called Bore Doctor. They are chiefly geared to clarinets and oboes, but many fluters have used them also.
They have an oiling kit too, that looks pretty nice, along with a lot of other interesting stuff. Lots of research it seems have gone into their products and you can read all about it there:
http://www.doctorsprod.com/accessories2.html
That will get you to the accessories page with the oiling kit, and you can find the index at the bottom of the page to navigate the site.
neighborhood gun shop, and buy the same parts for less, and no shipping.
The rod is the handle end of a two or three piece rifle cleaning rod or maybe a one-piece pistol cleaning rod.
The mops are shotgun bore mops. Used for the same thing in shotguns except for different reasons, oiling the bore.
Slotted ABS tip is a patch holder. Comes in a wide range of sizes to fit every imaginal caliber. One should come with the rod.
The "10 Unbleached, ribbed, cotton jersey swabs - $1.00 " by the way, are available as cleaning patches at Walmart for around 2-3.00 per bag of several hundred. Or if you're cheap, you could cut up your old t-shirts. Happy cleaning.
Dow Mathis ∴
Boerne, TX
Nothing is foolproof to a sufficiently motivated fool.
Boerne, TX
Nothing is foolproof to a sufficiently motivated fool.
- greenspiderweb
- Posts: 1974
- Joined: Sat Jan 24, 2004 5:23 pm
- antispam: No
- Please enter the next number in sequence: 10
- Location: SE PA near Philly
Sure, you can do that, but be careful if it's a metal rod, it could scratch the bore of your wooden flute. If you want a cheap rod, just get a plastic flute swab stick. It already has the tip attached, and then cut up some old underwear! Of course you don't get the (quoted from their website) "exclusive carbon fiber – epoxy graphite rod (used in stealth aircraft) which is exceptionally strong and will not scratch the wood" with the deluxe handle!dow wrote:Or you can go to the sporting goods department at Walmart, or your
neighborhood gun shop, and buy the same parts for less, and no shipping.
The rod is the handle end of a two or three piece rifle cleaning rod or maybe a one-piece pistol cleaning rod.
I like the idea of the Bore Dr rod, because you can buy the screw-on replaceable wool mops in 2 sizes for oiling from them reasonably too. Wool mops have been recommended for oiling, from what I've read, for more even distribution of the oil in the bore.
Some gun stores probably have similar cleaning rods and mops, I haven't looked lately, but just be sure you know what caliber flute you've got before you walk in and ask for one! And, try not to use the phrase "it's for my FLUTE" in a gun store! Some don't take kindly to flutey people!
Last edited by greenspiderweb on Wed Nov 16, 2005 9:11 pm, edited 1 time in total.
~~~~
Barry
Barry
- Congratulations
- Posts: 4215
- Joined: Mon Jan 17, 2005 6:05 pm
- Please enter the next number in sequence: 1
- Location: Charleston, SC
- Contact:
- dow
- Posts: 954
- Joined: Tue Dec 02, 2003 12:21 am
- antispam: No
- Please enter the next number in sequence: 12
- Location: Boerne, TX
I'm not sure what the bore of the foot end on an average flute is, but if the bore of the head joint is 19 mm, that equates to 0.748 inches. A 12 gauge bore is 0.729 inches, so the 12 ga. mop should work just fine. If you're feeling iffy about it, then go to Walmart. Nobody will help or bother you, and you can look through the gun cleaning stuff and find what you need. Looks like this:
What you're looking for will say "Kleen-Bore 16/12/10 Guage, .69-.75 BP" or something like that. Should be around a buck and a half or so.
Additionally, you can get the Kleen-Bore Saf-T-Clad rod which is epoxy coated, and is available in a 6-1/2" pistol length, or a five piece rod which is 30" fully assembled, for anyone with a two-person, contra bass flute. I'm not sure how much the five-piece is, but the pistol rod I bought last year was about six or seven bucks as I remember.
What you're looking for will say "Kleen-Bore 16/12/10 Guage, .69-.75 BP" or something like that. Should be around a buck and a half or so.
Additionally, you can get the Kleen-Bore Saf-T-Clad rod which is epoxy coated, and is available in a 6-1/2" pistol length, or a five piece rod which is 30" fully assembled, for anyone with a two-person, contra bass flute. I'm not sure how much the five-piece is, but the pistol rod I bought last year was about six or seven bucks as I remember.
Dow Mathis ∴
Boerne, TX
Nothing is foolproof to a sufficiently motivated fool.
Boerne, TX
Nothing is foolproof to a sufficiently motivated fool.
- peeplj
- Posts: 9029
- Joined: Mon Jan 21, 2002 6:00 pm
- Please enter the next number in sequence: 1
- Location: forever in the old hills of Arkansas
- Contact:
Aim?Denny wrote:Do you find that the transverse flute is harder to aim?peeplj wrote:Actually where I live it's quite common for the same people to have both musical instruments and guns.
--James
Actually, there are things that target shooting and flute playing have in common:
--you need to take good care of your equipment; Bad Things can happen if you don't
--both require concentration, and a certain focused state of mind
--both require fine micromotor skills
--both require good breath control
--both are great ways of burning off some stress
--both are good hobbies to enjoy with your friends
However, of course, there are some drastic differences:
--don't drink, EVER, when target shooting
--there are no small mistakes where guns are involved
--your flute isn't likely to kill someone if you aren't careful where you point it
--no one is ever killed cleaning an "unloaded" flute
--like swimming, you should never go shooting alone. If you get in trouble you will need someone else to be there to help you
--there are very few "self taught" gun enthusiasts; you need serious training from a respected professional. Having no music teacher won't seriously shorten your life; the converse isn't true of shooting.
--James
Last edited by peeplj on Tue Nov 15, 2005 7:19 pm, edited 1 time in total.
- chas
- Posts: 7707
- Joined: Wed Oct 10, 2001 6:00 pm
- antispam: No
- Please enter the next number in sequence: 10
- Location: East Coast US
What about the good ol' dowel or chopstick and a rag of cloth? They're cheap as dirt -- I use the sticks from those toy flags the damn realtors leave n the lawn every 4th of july. Some makers recommend cotton for the cloth because it's more absorbant, others recommend silk because it doesn't make lint. I prefer the latter, and stay away from recorder swabs (the word I learned for what are evidently now flute mops) because they leave lint in the bore, although I do use one for the head if it's gotten too wet during playing.
Charlie
Whorfin Woods
"Our work puts heavy metal where it belongs -- as a music genre and not a pollutant in drinking water." -- Prof Ali Miserez.
Whorfin Woods
"Our work puts heavy metal where it belongs -- as a music genre and not a pollutant in drinking water." -- Prof Ali Miserez.