M&E Xtreme Makeover
- Jon C.
- Posts: 3526
- Joined: Wed Nov 07, 2001 6:00 pm
- antispam: No
- Please enter the next number in sequence: 8
- Tell us something.: I restore 19th century flutes, specializing in Rudall & Rose, and early American flutes. I occasionally make new flutes. Been at it for about 15 years.
- Location: San Diego
- Jon C.
- Posts: 3526
- Joined: Wed Nov 07, 2001 6:00 pm
- antispam: No
- Please enter the next number in sequence: 8
- Tell us something.: I restore 19th century flutes, specializing in Rudall & Rose, and early American flutes. I occasionally make new flutes. Been at it for about 15 years.
- Location: San Diego
- Jon C.
- Posts: 3526
- Joined: Wed Nov 07, 2001 6:00 pm
- antispam: No
- Please enter the next number in sequence: 8
- Tell us something.: I restore 19th century flutes, specializing in Rudall & Rose, and early American flutes. I occasionally make new flutes. Been at it for about 15 years.
- Location: San Diego
Thanks, I haven't made any rings for fingers, but I do where them around a while, before sticking them on the flutes...Peggy wrote:How nice! It's beautiful!
And, oooooh! What looooovely rings! I had no idea they were so detailed!
I'm afraid to ask . . . do you make them for . . . fingers . . . ?????
- I.D.10-t
- Posts: 7660
- Joined: Wed Dec 17, 2003 9:57 am
- antispam: No
- Location: Minneapolis, MN, USA, Earth
I do not believe that looks should have any thing to do with a flute. The sound is more important. That being said, weakness in me says that I would rather have a pretty flute that plays the same as a less pretty one.
PS. Just wondering, are the rings lost wax?
PS. Just wondering, are the rings lost wax?
"Be not deceived by the sweet words of proverbial philosophy. Sugar of lead is a poison."
- Jon C.
- Posts: 3526
- Joined: Wed Nov 07, 2001 6:00 pm
- antispam: No
- Please enter the next number in sequence: 8
- Tell us something.: I restore 19th century flutes, specializing in Rudall & Rose, and early American flutes. I occasionally make new flutes. Been at it for about 15 years.
- Location: San Diego
Hi James,peeplj wrote:You do lovely work!
You know, somehow that "before" pic of the M&E looks awfully familiar!
Curiosity: do you feel that the flute plays or handles differently due to the work you did?
--James
The flute has more of a flute feel, less of holding a piece of pipe...
Not to knock the M&E, the flute has a very nice sound, that is why Eilam wanted to fix it up, because he liked it so much. I turned a little off the first section, didn't alter the tuning at all.
Your right in a Zen sort of way. But following this thinking, it shouldn't matter if your scrambled eggs are green...I.D.10-t wrote:I do not believe that looks should have any thing to do with a flute. The sound is more important. That being said, weakness in me says that I would rather have a pretty flute that plays the same as a less pretty one.
PS. Just wondering, are the rings lost wax?
It is all part of the movie.
The rings are made from pattern wire. I would like to get into lost wax at some point.
Jon
-
- Posts: 61
- Joined: Tue Oct 12, 2004 2:45 pm
- Please enter the next number in sequence: 1
- Location: Spain
I clicked the little box with a red X and up comes a page about hosting with a frog picture on it. I did na see a flute picture. Tell me what to do.
Jon, I sent the antlers and some ivory vegetable nuts the other day. As soon as it gets warm and the blossems come out, I'll find a dogwood and send a few billits. They will be green, though. I have been told that a bland after drilling can be microwaved as a minni-kiln dryer. Until recently I had a dogwood mallet that had been used in the lumber woods since 1902. I have steel wedges and mallets that tour up much easier. I'll bet it is good stuff for a flute. I remember a year ago, someone had Owell make him a dogwood flute.
Anyhow, tell me how to get your picture.
Nelson
Jon, I sent the antlers and some ivory vegetable nuts the other day. As soon as it gets warm and the blossems come out, I'll find a dogwood and send a few billits. They will be green, though. I have been told that a bland after drilling can be microwaved as a minni-kiln dryer. Until recently I had a dogwood mallet that had been used in the lumber woods since 1902. I have steel wedges and mallets that tour up much easier. I'll bet it is good stuff for a flute. I remember a year ago, someone had Owell make him a dogwood flute.
Anyhow, tell me how to get your picture.
Nelson
- michael_coleman
- Posts: 762
- Joined: Wed Nov 20, 2002 6:00 pm
- antispam: No
- Please enter the next number in sequence: 8
- Tell us something.: I play the first flute Jon Cochran ever made but haven't been very active on the board the last 9-10 years. Life happens I guess...I owned a keyed M&E flute for a while and I kind of miss it.
- Location: Nottingham, England
Re: M&E Xtreme Makeover
Wow Jon, it looks an awfully lot like your delrin flutes, although the rings aren't brass. Now you can do my M&EJon C. wrote:Hi,
I just finished Eilam's M&E Xtreme makeover, thought I would share it with you. Gave it a little more contour in the first joint and added silver rings.
It's amazing that it is the same flute, it really changes the look...
Jon
Hows that Manzanita drying out?