Be careful with knives...
- JohnPalmer
- Posts: 668
- Joined: Tue Jun 26, 2001 6:00 pm
- Please enter the next number in sequence: 1
- Location: Elk Grove, Calif.
Be careful with knives...
Tonight I cut a big chunk of skin off the tip of my right thumb, again, (it's happened before) while cutting bell peppers for my spaghetti. This was the worst I've ever done, as it took over two hours for the blood to stop soaking the paper towels I had pressed against it.
I'll be fine. This is just a reminder to keep your fingers pointed down and your thumb out of the way!
I should have BBQ'd ribs, instead.
JP
I'll be fine. This is just a reminder to keep your fingers pointed down and your thumb out of the way!
I should have BBQ'd ribs, instead.
JP
- TonyHiggins
- Posts: 2996
- Joined: Tue Jun 26, 2001 6:00 pm
- Please enter the next number in sequence: 1
- Location: SF East Bay, CA
- Contact:
John, I'd hate to watch you chopping up ribs with a meat cleaver.
Tony
Tony
http://tinwhistletunes.com/clipssnip/newspage.htm Officially, the government uses the term “flap,” describing it as “a condition, a situation or a state of being, of a group of persons, characterized by an advanced degree of confusion that has not quite reached panic proportions.”
-
- Posts: 10300
- Joined: Tue Mar 12, 2002 6:00 pm
- Please enter the next number in sequence: 1
- Location: SF East Bay Area
It's a known fact that musicians hurt their fingers mostly in stupid ways. Congrats JP, you qualify!!!
Julian Bream, the cl. guitarist mangled his arm in an auto accident because he had it resting on the door frame while he motored down the highway. Had to have similar surgery as Les Paul, resulting in having his arm "set" permanently at a playing-able position.
Most times i have hurt or cut myself have been downright embarrassing. Sliced a 1 3/4 gash into my wrist will CANING A CHAIR. With a chisel. Only problem is, you don't really need a chisel to cane a chair. I was just using for "leverage". Missed the controlling tendon by 1/16th of an inch, which would have ended my playing days.
Julian Bream, the cl. guitarist mangled his arm in an auto accident because he had it resting on the door frame while he motored down the highway. Had to have similar surgery as Les Paul, resulting in having his arm "set" permanently at a playing-able position.
Most times i have hurt or cut myself have been downright embarrassing. Sliced a 1 3/4 gash into my wrist will CANING A CHAIR. With a chisel. Only problem is, you don't really need a chisel to cane a chair. I was just using for "leverage". Missed the controlling tendon by 1/16th of an inch, which would have ended my playing days.
- CHIFF FIPPLE
- Posts: 722
- Joined: Tue Apr 15, 2003 10:22 am
- Please enter the next number in sequence: 1
- Location: Albawhistle Works Bonnie Scotland
- Contact:
Yup
Keep sharp and pointed objects away from fools and children
As for cutting your self Don't do itit hurts :roll:
Keep sharp and pointed objects away from fools and children
As for cutting your self Don't do itit hurts :roll:
Stacey has the most bodacious fipples! & Message board
http://whistlenstrings.invisionzone.com ... t=0&p=3303&
http://whistlenstrings.invisionzone.com ... t=0&p=3303&
- Easily_Deluded_Fool
- Posts: 485
- Joined: Sat Mar 02, 2002 6:00 pm
- Please enter the next number in sequence: 1
- Location: The space between thoughts.
- brewerpaul
- Posts: 7300
- Joined: Wed Jun 27, 2001 6:00 pm
- antispam: No
- Please enter the next number in sequence: 10
- Location: Clifton Park, NY
- Contact:
- burnsbyrne
- Posts: 1345
- Joined: Thu Apr 11, 2002 6:00 pm
- Please enter the next number in sequence: 1
- Location: Cleveland, Ohio
- fancypiper
- Posts: 2162
- Joined: Mon Jun 02, 2003 1:08 pm
- antispam: No
- Please enter the next number in sequence: 12
- Location: Sparta NC
- Contact:
- Jerry Freeman
- Posts: 6074
- Joined: Mon Dec 30, 2002 6:00 pm
- antispam: No
- Please enter the next number in sequence: 8
- Location: Now playing in Northeastern Connecticut
- Contact:
My first woodworking injury was six stitches in the left wrist from a woodcarving chisel at the age of six.
I had numerous cuts up until I was 12, when I severed the extensor tendon in my left index finger. After that, I developed a "no exceptions" attitude about never NEVER allowing myself to continue a task if I'm not sure my hands are safe. Nowadays, the only injuries I get are minor ones from a cutting tool slipping or cutting through the work and bumping my chisel hand into a piece of wood or something. Now that I've recognized that pattern, it's almost completely stopped happening.
Knock on wood. So far so good. Ten fingers reasonably intact. I worry about my hands every day.
Please be careful, everyone.
Best wishes,
Jerry
I had numerous cuts up until I was 12, when I severed the extensor tendon in my left index finger. After that, I developed a "no exceptions" attitude about never NEVER allowing myself to continue a task if I'm not sure my hands are safe. Nowadays, the only injuries I get are minor ones from a cutting tool slipping or cutting through the work and bumping my chisel hand into a piece of wood or something. Now that I've recognized that pattern, it's almost completely stopped happening.
Knock on wood. So far so good. Ten fingers reasonably intact. I worry about my hands every day.
Please be careful, everyone.
Best wishes,
Jerry
- TonyHiggins
- Posts: 2996
- Joined: Tue Jun 26, 2001 6:00 pm
- Please enter the next number in sequence: 1
- Location: SF East Bay, CA
- Contact:
I read a post in a pipe forum once where a guy said he just got his first set of uilleann pipes and he slipped into a ditch and cracked a rib. How do you explain these things? Higher powers are at work here, for better or worse. Ours is not to reason why.
Tony
Tony
http://tinwhistletunes.com/clipssnip/newspage.htm Officially, the government uses the term “flap,” describing it as “a condition, a situation or a state of being, of a group of persons, characterized by an advanced degree of confusion that has not quite reached panic proportions.”
-
- Posts: 10300
- Joined: Tue Mar 12, 2002 6:00 pm
- Please enter the next number in sequence: 1
- Location: SF East Bay Area
Well my point about the stupid aspect is that I have worked with a lot of power tools (was a rec. manager for a woodworking tool store once) and I have never hurt myself with em. Carried a pocket knife all my life too and cannot remember ever cutting myself with it. Because I am super careful and I have all these career-ending nightmares about any kind of power saw or especially, routers.
SO it leaves only the really weird injuries. I am super careful in the kitchen. The classic kitchen injury is around Thanksgiving and Christmas when you are REALLY having a good time and get distracted. Burns and cuts. I always say a little prayer that the other Weekender will make it thru the big family dinner without huge bandaids...
Trained chefs can verify this but I have observed that many knife cuts are because: knife is not sharp enough, preparer does not have food and cutting board at right height for their arms. Most often, the cutting board seems too high for correct leverage and pivots.. It's like watching a learning musician who doesn't have the right way to hold their instrument but with worse consequences. I still don';t have the classic chefs way of cutting down perfectly (knuckles forward, tips in) so I DON'T try to speed whilst cutting like they do. Also, really pick out a knife you can hold becuase they do come in different handle shapes etc. What works for one person sure doesn't always work for another. And avoid cheap knives for your own safety.
There can be no distraction with a chef's knife. It's awesome to watch real chefs cut up stuff.
SO it leaves only the really weird injuries. I am super careful in the kitchen. The classic kitchen injury is around Thanksgiving and Christmas when you are REALLY having a good time and get distracted. Burns and cuts. I always say a little prayer that the other Weekender will make it thru the big family dinner without huge bandaids...
Trained chefs can verify this but I have observed that many knife cuts are because: knife is not sharp enough, preparer does not have food and cutting board at right height for their arms. Most often, the cutting board seems too high for correct leverage and pivots.. It's like watching a learning musician who doesn't have the right way to hold their instrument but with worse consequences. I still don';t have the classic chefs way of cutting down perfectly (knuckles forward, tips in) so I DON'T try to speed whilst cutting like they do. Also, really pick out a knife you can hold becuase they do come in different handle shapes etc. What works for one person sure doesn't always work for another. And avoid cheap knives for your own safety.
There can be no distraction with a chef's knife. It's awesome to watch real chefs cut up stuff.
- CHIFF FIPPLE
- Posts: 722
- Joined: Tue Apr 15, 2003 10:22 am
- Please enter the next number in sequence: 1
- Location: Albawhistle Works Bonnie Scotland
- Contact:
Of course I' ve never cut myself at all never done any thing silly with an angle grinder, lathe, milling machine, or any other power tool. :roll:Jerry Freeman wrote:My first woodworking injury was six stitches in the left wrist from a woodcarving chisel at the age of six.
I
Knock on wood. So far so good. Ten fingers reasonably intact. I worry about my hands every day.
Please be careful, everyone.
Best wishes,
Jerry
Stacey has the most bodacious fipples! & Message board
http://whistlenstrings.invisionzone.com ... t=0&p=3303&
http://whistlenstrings.invisionzone.com ... t=0&p=3303&