Nodes in Bamboo Flutes
-
- Posts: 5
- Joined: Tue May 19, 2015 6:44 pm
- antispam: No
- Please enter the next number in sequence: 8
Nodes in Bamboo Flutes
So lately I've noticed that most of the really experienced flute makers use long stretches of node-less bamboo to make their flutes - Erik the flutemaker noted that the bamboo used to make his Egyptian Flute is rare due to the "long, node-less sections" required to make them. Then I came across this video in which Billy Miller says that "some of the worst playing flutes you'll find have nodes" at around 2:38 here: https://www.youtube.com/watch?v=eFRJXOwaI3w
So, why is that? I always thought that if you just took out the nodes you can turn just about any bamboo stalk into a flute. Why do flute makers tend to use pieces without nodes in making their instruments?
So, why is that? I always thought that if you just took out the nodes you can turn just about any bamboo stalk into a flute. Why do flute makers tend to use pieces without nodes in making their instruments?
- Feadoggie
- Posts: 3940
- Joined: Mon Feb 14, 2005 11:06 pm
- antispam: No
- Location: Stout's Valley, PA, USA
Re: Nodes in Bamboo Flutes
The nodes are not easily worked down to the inside diameter of the rest of the tube so they result in a constriction in the bore at the node. That messes with timbre and tuning. Where the constriction occurs in the bore determines how and how much the tuning is effected. You can test that out on any cylindrical flute by inserting a properly sized ring inside the bore and moving the position around.
Welcome to the C&F flute forum.
Feadoggie
Welcome to the C&F flute forum.
Feadoggie
I've proven who I am so many times, the magnetic strips worn thin.
-
- Posts: 5
- Joined: Tue May 19, 2015 6:44 pm
- antispam: No
- Please enter the next number in sequence: 8
Re: Nodes in Bamboo Flutes
Oh alright, that makes sense, especially considering how tough nodes can be. Thank you very much for both the response and the welcome!
- MichaelHoward
- Posts: 11
- Joined: Mon May 18, 2015 6:41 am
- antispam: No
- Please enter the next number in sequence: 8
Re: Nodes in Bamboo Flutes
Basically it's just more work to get the bore smooth and fluent. My goal is to always find nodeless lengths, but it's not always easy. So I usually settle for a node closer to the end so the toneholes are not compromised. Most of my flutes are conical and having the node closer to the end is easily remedied.Feadoggie wrote:The nodes are not easily worked down to the inside diameter of the rest of the tube so they result in a constriction in the bore at the node. That messes with timbre and tuning. Where the constriction occurs in the bore determines how and how much the tuning is effected. You can test that out on any cylindrical flute by inserting a properly sized ring inside the bore and moving the position around.
Welcome to the C&F flute forum.
Feadoggie
- MichaelHoward
- Posts: 11
- Joined: Mon May 18, 2015 6:41 am
- antispam: No
- Please enter the next number in sequence: 8
Re: Nodes in Bamboo Flutes
Feadoggie wrote:The nodes are not easily worked down to the inside diameter of the rest of the tube so they result in a constriction in the bore at the node. That messes with timbre and tuning. Where the constriction occurs in the bore determines how and how much the tuning is effected. You can test that out on any cylindrical flute by inserting a properly sized ring inside the bore and moving the position around.
Welcome to the C&F flute forum.
Feadoggie
I created sanding tubes out of wood dowel and various drill bits that I adhere sandpaper to - works like a charm
- s1m0n
- Posts: 10069
- Joined: Wed Oct 06, 2004 12:17 am
- antispam: No
- Please enter the next number in sequence: 10
- Location: The Inside Passage
Re: Nodes in Bamboo Flutes
Also, when you shape the inside of a bamboo tube, you're cutting into and exposing end grain, greatly altering its moisture-absorbtion qualities. A natural inter-node stretch of bamboo will have no (or close to no) end grain exposed, except at the ends and toneholes.
Last edited by s1m0n on Wed May 20, 2015 8:44 pm, edited 1 time in total.
And now there was no doubt that the trees were really moving - moving in and out through one another as if in a complicated country dance. ('And I suppose,' thought Lucy, 'when trees dance, it must be a very, very country dance indeed.')
C.S. Lewis
C.S. Lewis
-
- Posts: 399
- Joined: Sat Sep 03, 2005 5:55 pm
- antispam: No
- Please enter the next number in sequence: 8
- Tell us something.: I try my best to play the flute and pipes. I have been coming here for years and now are required to fill this out for an address change.
- Location: Coos Bay Oregon
Re: Nodes in Bamboo Flutes
It is the opposite in shakuhachi flutes which are supposed to have seven nodes, including the ones on the root section. The ones with less go for much less money. Much less.
- s1m0n
- Posts: 10069
- Joined: Wed Oct 06, 2004 12:17 am
- antispam: No
- Please enter the next number in sequence: 10
- Location: The Inside Passage
Re: Nodes in Bamboo Flutes
Seven in general, or are they all supposed to line up at specific points along the tube? Is the body of a shakuhachi shaped to a uniform cylindar, or do the nodes make for a complex internal bore?kmag wrote:It is the opposite in shakuhachi flutes which are supposed to have seven nodes, including the ones on the root section. The ones with less go for much less money. Much less.
And now there was no doubt that the trees were really moving - moving in and out through one another as if in a complicated country dance. ('And I suppose,' thought Lucy, 'when trees dance, it must be a very, very country dance indeed.')
C.S. Lewis
C.S. Lewis
- MichaelHoward
- Posts: 11
- Joined: Mon May 18, 2015 6:41 am
- antispam: No
- Please enter the next number in sequence: 8
Re: Nodes in Bamboo Flutes
Shakuhachi is a very different animal - the nodes play a key part in the overall sound of the instrument. I know in some types of Shakuhachi the maker will leave chunks of the node intact for a rougher tone, more whispy microtones. Technically these one piecekmag wrote:It is the opposite in shakuhachi flutes which are supposed to have seven nodes, including the ones on the root section. The ones with less go for much less money. Much less.
flutes are 'Hocchiku' not Shakuhachi.
- Nanohedron
- Moderatorer
- Posts: 38247
- Joined: Wed Dec 18, 2002 6:00 pm
- antispam: No
- Please enter the next number in sequence: 8
- Tell us something.: Been a fluter, citternist, and uilleann piper; committed now to the way of the harp.
Oh, yeah: also a mod here, not a spammer. A matter of opinion, perhaps. - Location: Lefse country
Re: Nodes in Bamboo Flutes
No expert here, but this is what I've gleaned: In precision bore shaks the nodes are relegated overall to the realm of visual appeal, but in the case of hotchiku (natural, unlined bore shaks), the nodes will sometimes be used internally for acoustic reasons. Since precise node location ultimately cannot be controlled but is the result of natural growth, beyond experience and expertise there's no hard-and-fast about how and why the maker employs them in their effect on tonal aesthetics; best as I can gather, especially with the hotchiku there's always a certain amount of serendipity the maker must play with, to be used to advantage according to the opportunities it provides. Here are pics of a seven-node and an eight-node shak:s1m0n wrote:Seven in general, or are they all supposed to line up at specific points along the tube?kmag wrote:It is the opposite in shakuhachi flutes which are supposed to have seven nodes, including the ones on the root section. The ones with less go for much less money. Much less.
The uppermost node is at the mouthpiece. As can be seen, offset finger holes are an option. As these are one-piece instruments and I see no embouchure insert, I assume they are in fact hotchiku, which is the original bare-bones design prototypical to the now usually two-piece, lined-interior shakuhachi which comes with an embouchure insert, typically of horn or bone.
Ideally, overall the bore is conical like the trad flute, but it stops at a "choke point" toward the bottom and flares back out again. Using nodes for additional bore eccentricity is an option, but in precision bore shaks these needs are usually met instead by filler material called "ji" which is often lacquer, and other materials are also used. The bore may be smooth or rough depending on the tone desired. I read that some prize an elliptical bore, but I can only assume that this was meant in cross-section.s1m0n wrote:Is the body of a shakuhachi shaped to a uniform cylindar, or do the nodes make for a complex internal bore?
"If you take music out of this world, you will have nothing but a ball of fire." - Balochi musician
- Feadoggie
- Posts: 3940
- Joined: Mon Feb 14, 2005 11:06 pm
- antispam: No
- Location: Stout's Valley, PA, USA
Re: Nodes in Bamboo Flutes
Good discussion.
There's is a lot to be gained, I think, from traditional Shakuhachi design experience and construction which can be useful in making whistles and other simple system flutes. One site I keep referring back to is this one. http://www.navaching.com/shaku/shakuindex.html Might make for interesting reading if you haven't already found it. Doesn't go too very deep into the physics either. Enjoy.
Feadoggie
There's is a lot to be gained, I think, from traditional Shakuhachi design experience and construction which can be useful in making whistles and other simple system flutes. One site I keep referring back to is this one. http://www.navaching.com/shaku/shakuindex.html Might make for interesting reading if you haven't already found it. Doesn't go too very deep into the physics either. Enjoy.
Feadoggie
I've proven who I am so many times, the magnetic strips worn thin.
-
- Posts: 113
- Joined: Thu Mar 28, 2013 4:36 pm
- antispam: No
- Please enter the next number in sequence: 8
Re: Nodes in Bamboo Flutes
Do these instruments come under the same category as Kavals ? Should they be relegated to the "Outer Limits" of
The World/Folk Winds ???
The World/Folk Winds ???
- Nanohedron
- Moderatorer
- Posts: 38247
- Joined: Wed Dec 18, 2002 6:00 pm
- antispam: No
- Please enter the next number in sequence: 8
- Tell us something.: Been a fluter, citternist, and uilleann piper; committed now to the way of the harp.
Oh, yeah: also a mod here, not a spammer. A matter of opinion, perhaps. - Location: Lefse country
Re: Nodes in Bamboo Flutes
Only if your shoes are too tight. The topic started out on transverse flutes and nodes. If the topic started out on shakuhachi, then yes, it would belong in the World/Folk Winds forum.
Here at C&F we have a longstanding tradition of not only tolerating but even celebrating thread drift (and I'm heartened to see you embracing our ways so readily, yourself ), and believe me, this ain't nuthin'. By our standards shakuhachis and their nodes is still arguably on-topic.
Also thread drift usually signals that the original topic has run out of steam. But here I think it might be a bit early for that, yet.
So. How about them nodes, folks?
Here at C&F we have a longstanding tradition of not only tolerating but even celebrating thread drift (and I'm heartened to see you embracing our ways so readily, yourself ), and believe me, this ain't nuthin'. By our standards shakuhachis and their nodes is still arguably on-topic.
Also thread drift usually signals that the original topic has run out of steam. But here I think it might be a bit early for that, yet.
So. How about them nodes, folks?
"If you take music out of this world, you will have nothing but a ball of fire." - Balochi musician
-
- Posts: 113
- Joined: Thu Mar 28, 2013 4:36 pm
- antispam: No
- Please enter the next number in sequence: 8
Re: Nodes in Bamboo Flutes
Egyptian Ney, Japanese Shakuhachi - Drift ??? Guess it depends on WHO's doing the drifting.
I do, however, recognize double standards and hypocrisy when I see it !
How do you think the Bulgarians, Romanians, Turks, Hungarians, Albanians, Macedonians, not forgetting the Serbs, ( and countless shepherds ) will feel about the current state of affairs on Chiff & Fipple. The sheep will definitely feel depressed, their fleece may fall out with the worry, and it gets really cold in the Carpathians in Winter. Oh Dear, I appear to be drifting................
I do, however, recognize double standards and hypocrisy when I see it !
How do you think the Bulgarians, Romanians, Turks, Hungarians, Albanians, Macedonians, not forgetting the Serbs, ( and countless shepherds ) will feel about the current state of affairs on Chiff & Fipple. The sheep will definitely feel depressed, their fleece may fall out with the worry, and it gets really cold in the Carpathians in Winter. Oh Dear, I appear to be drifting................
- Nanohedron
- Moderatorer
- Posts: 38247
- Joined: Wed Dec 18, 2002 6:00 pm
- antispam: No
- Please enter the next number in sequence: 8
- Tell us something.: Been a fluter, citternist, and uilleann piper; committed now to the way of the harp.
Oh, yeah: also a mod here, not a spammer. A matter of opinion, perhaps. - Location: Lefse country
Re: Nodes in Bamboo Flutes
One word, 2TOOTS: Decaf.
"If you take music out of this world, you will have nothing but a ball of fire." - Balochi musician