Anyone Heard Of A Ridvad?

The Chiff & Fipple Irish Flute on-line community. Sideblown for your protection.
Post Reply
2T00TS
Posts: 113
Joined: Thu Mar 28, 2013 4:36 pm
antispam: No
Please enter the next number in sequence: 8

Anyone Heard Of A Ridvad?

Post by 2T00TS »

Hello Again,
Has anyone heard of a flute-maker called A Ridvad? All I know is that he was active in an area of Romania called Temesvar. Also, has anyone had any experience with a simple system flute from 19th Century Romania?
Thanks.
User avatar
Jayhawk
Posts: 3905
Joined: Tue Oct 15, 2002 6:00 pm
antispam: No
Please enter the next number in sequence: 8
Tell us something.: Well, just trying to update my avatar after a decade. Hope this counts! Ok, so apparently I must babble on longer.
Location: Lawrence, KS
Contact:

Re: Anyone Heard Of A Ridvad?

Post by Jayhawk »

I know nothing about this maker at all, but I'd love to see pictures!

Eric
User avatar
benhall.1
Moderator
Posts: 14816
Joined: Wed Jan 14, 2009 5:21 pm
antispam: No
Please enter the next number in sequence: 8
Tell us something.: I'm a fiddler and, latterly, a fluter. I love the flute. I wish I'd always played it. I love the whistle as well. I'm blessed in having really lovely instruments for all of my musical interests.
Location: Unimportant island off the great mainland of Europe

Re: Anyone Heard Of A Ridvad?

Post by benhall.1 »

You didn't win this one, did you? :)

Looks lovely ...
2T00TS
Posts: 113
Joined: Thu Mar 28, 2013 4:36 pm
antispam: No
Please enter the next number in sequence: 8

Re: Anyone Heard Of A Ridvad?

Post by 2T00TS »

Yup, that's the one.
User avatar
Jayhawk
Posts: 3905
Joined: Tue Oct 15, 2002 6:00 pm
antispam: No
Please enter the next number in sequence: 8
Tell us something.: Well, just trying to update my avatar after a decade. Hope this counts! Ok, so apparently I must babble on longer.
Location: Lawrence, KS
Contact:

Re: Anyone Heard Of A Ridvad?

Post by Jayhawk »

Neat find! Do you have it yet, and if so...what does it need to be playable?

Eric
User avatar
an seanduine
Posts: 1999
Joined: Sun Sep 13, 2009 10:06 pm
antispam: No
Location: just outside Xanadu

Re: Anyone Heard Of A Ridvad?

Post by an seanduine »

I'm not usually partial to blondes. . .but that is one good looking flute!

Bob
Not everything you can count, counts. And not everything that counts, can be counted

The Expert's Mind has few possibilities.
The Beginner's mind has endless possibilities.
Shunryu Suzuki, Roshi
User avatar
jemtheflute
Posts: 6969
Joined: Tue May 23, 2006 6:47 am
antispam: No
Please enter the next number in sequence: 8
Location: N.E. Wales, G.B.
Contact:

Re: Anyone Heard Of A Ridvad?

Post by jemtheflute »

Ridvad isn't in my (not most recent) edition of Langwill. Nice looking flute. Congrats!
I respect people's privilege to hold their beliefs, whatever those may be (within reason), but respect the beliefs themselves? You gotta be kidding!

My YouTube channel
My FB photo albums
Low Bb flute: 2 reels (audio)
Flute & Music Resources - helpsheet downloads
2T00TS
Posts: 113
Joined: Thu Mar 28, 2013 4:36 pm
antispam: No
Please enter the next number in sequence: 8

Re: Anyone Heard Of A Ridvad?

Post by 2T00TS »

This beauty sounds as good as it looks. Turns out it plays in Eb. My son and I renovate 19th. Century flutes as a hobby - and then even better, we get to play them! On this one we; repaired small crack to head, glued one broken horn ferrule, cleaned brass keys ( and tweaked leaf springs ), replaced pads, corked the joints, removed and replaced a really, really dried out head cork ( talk about obstinate-would not be surprised if it was the original ) and finally a thorough dowse with bore oil.
Result - Sonic Flute Nirvana.
User avatar
Julia Delaney
Posts: 1083
Joined: Sat Jul 19, 2008 10:15 am
antispam: No
Please enter the next number in sequence: 8
Tell us something.: I play fiddle, concertina, flute. I live in NH. Lived in Kilshanny, Co Clare, for about 20 years. Politically on the far left. Diet on the far right (plant-based fundamentalist). Musically in the middle of the pure drop.
Location: New Hampshire, USA
Contact:

Re: Anyone Heard Of A Ridvad?

Post by Julia Delaney »

Fair play to you Tootsies. You took a chance and it worked out well.
I appreciate what you did and what you do.
Happy toots!
Freedom is merely privilege extended, unless enjoyed by one and all. The Internationale
Viking of Kiev
Posts: 110
Joined: Wed Oct 24, 2007 8:35 am
antispam: No
Please enter the next number in sequence: 8
Tell us something.: The nick is outdated, I'd been living in Kiev for 13 years but now I am located in St.Petersburg, Russia.
Location: Russia
Contact:

Re: Anyone Heard Of A Ridvad?

Post by Viking of Kiev »

2T00TS wrote:This beauty sounds as good as it looks. Turns out it plays in Eb. My son and I renovate 19th. Century flutes as a hobby - and then even better, we get to play them! On this one we; repaired small crack to head, glued one broken horn ferrule, cleaned brass keys ( and tweaked leaf springs ), replaced pads, corked the joints, removed and replaced a really, really dried out head cork ( talk about obstinate-would not be surprised if it was the original ) and finally a thorough dowse with bore oil.
Result - Sonic Flute Nirvana.
Can you post some pics of this flute after restoration? Really interesting too look at.
This is a nice looking flute - as it is on ebay pics. It must be even nicer after cleaning and polishing.
User avatar
paddler
Posts: 755
Joined: Sat Nov 03, 2007 7:19 pm
antispam: No
Please enter the next number in sequence: 8
Location: Hood River, Oregon, USA
Contact:

Re: Anyone Heard Of A Ridvad?

Post by paddler »

The New Langwill Index lists a flute maker called Anton Ridwal (b 1818; d Temesvar 1890).

The entry reads:

"BI fl Temeswar second half 19C.
Succeeded by his son Anton Ridwal junior (b 1845; d 1901)."

Certain aspects of the style of this flute look similar to flutes made by Stephan Koch, who was a famous flute maker from Vienna (earlier). There may be some regional influence here. Temesvar is in Romania, but it is only about 300 miles from Vienna.

I was going to bid on that flute, but got distracted and let it slip by. Looks like you got a good deal!

Jon
User avatar
Steve Bliven
Posts: 2980
Joined: Sat Jan 31, 2004 2:06 pm
antispam: No
Location: Dartmouth, Massachusetts, USA

Re: Anyone Heard Of A Ridvad?

Post by Steve Bliven »

Google on Anton Ridwal shows a number of brass instruments, seeming to date from the period of the son. Perhaps the son was a dealer, not a maker?

Best wishes,

Steve
Live your life so that, if it was a book, Florida would ban it.
Post Reply