Pipemakers in the 1970s
- PJ
- Posts: 5889
- Joined: Tue Jan 18, 2005 12:23 pm
- antispam: No
- Please enter the next number in sequence: 8
- Tell us something.: ......................................................................................................
- Location: Baychimo
Pipemakers in the 1970s
From a related thread, who were the active pipemakers in the 1970s and where were they based?
These are the ones I can think of:
Leo Rowsome was making pipes in Dublin until his death in 1970
Dan Dowd in Dublin
Matt Kiernan in Dublin
Alf Kennedy in Cork
Patrick Hennelly in Chicago
Anyone else? Anyone else making pipes in the US? What about in the UK?
These are the ones I can think of:
Leo Rowsome was making pipes in Dublin until his death in 1970
Dan Dowd in Dublin
Matt Kiernan in Dublin
Alf Kennedy in Cork
Patrick Hennelly in Chicago
Anyone else? Anyone else making pipes in the US? What about in the UK?
PJ
- waymer
- Posts: 211
- Joined: Fri Mar 16, 2007 11:21 am
- Please enter the next number in sequence: 1
- Location: A vineyard in central California
Re: Pipemakers in the 1970s
Maybe a smaller list would be generated by asking about makers in the late 60's early 70's
by the end of the 1970's
Pat Sky
David Quinn
Tim Britton
USA
Johnny Bourke
Bruce DeVue
Joe McKenna
Eugene Lambe
Ireland
Alan Ginsburg
UK
by the end of the 1970's
Pat Sky
David Quinn
Tim Britton
USA
Johnny Bourke
Bruce DeVue
Joe McKenna
Eugene Lambe
Ireland
Alan Ginsburg
UK
Jamie
Live every day as if it were your last, for one day you are sure to be right.
Live every day as if it were your last, for one day you are sure to be right.
- billh
- Posts: 2159
- Joined: Mon Jan 05, 2004 6:15 am
- Please enter the next number in sequence: 1
- Location: Skerries, County Dublin
- Contact:
Re: Pipemakers in the 1970s
When was Ned White active? Seems he was in there somewhere.
In any case I think it was virtually down to Matt and Dan for awhile - both amateur makers - anyone know when Alf Kennedy stopped making altogether? I suspect there was a period when there were no fulltime professional makers at all.
Also, there seems to have been a similar period earlier in the 20th century when there were few if any active makers, and no "professional" makers, so the craft was in a very tenuous position for a good while.
In any case I think it was virtually down to Matt and Dan for awhile - both amateur makers - anyone know when Alf Kennedy stopped making altogether? I suspect there was a period when there were no fulltime professional makers at all.
Also, there seems to have been a similar period earlier in the 20th century when there were few if any active makers, and no "professional" makers, so the craft was in a very tenuous position for a good while.
Re: Pipemakers in the 1970s
Mid 70's UK plus locations of where they were and where they are
Douglas Wilkinson and Glen McCarthy - East London. Ceased making early 80's
Alan Ginsberg - East London now North Wales
Christopher Bayley - West London, Teddington now Redhill, Surrey
Colin Ross of NSP fame made a few chanters - Newcastle
John Addison - Peckham, 1975 Lincolnshire - now deceased (early 90's ?)
Brian Howard - Sheffield
Dave Williams - Newark - late 70's now deceased
Ireland/Eire
Leon Rowsome (Son of Leo) Deceased
What about Charles Roberts when did he start ? was Sligo Now in Spain
Any more accurate dates for their start up
John
Douglas Wilkinson and Glen McCarthy - East London. Ceased making early 80's
Alan Ginsberg - East London now North Wales
Christopher Bayley - West London, Teddington now Redhill, Surrey
Colin Ross of NSP fame made a few chanters - Newcastle
John Addison - Peckham, 1975 Lincolnshire - now deceased (early 90's ?)
Brian Howard - Sheffield
Dave Williams - Newark - late 70's now deceased
Ireland/Eire
Leon Rowsome (Son of Leo) Deceased
What about Charles Roberts when did he start ? was Sligo Now in Spain
Any more accurate dates for their start up
John
- MichaelLoos
- Posts: 676
- Joined: Wed Sep 05, 2007 2:53 am
- antispam: No
- Please enter the next number in sequence: 8
- Tell us something.: I'm here because I just wanted to change my location... but it turns out much more complicated than I thought. Do I already have the 100 required characters?
- Location: Klietz, Germany
Re: Pipemakers in the 1970s
I got a chanter top made by Alf Kennedy in 1996 or '97. I believe in the 70s his father Maurice was still active.billh wrote:anyone know when Alf Kennedy stopped making altogether?
In Northern Ireland, there were Seán McAloon and Finbarr McLoughlin, Robbie Hughes started in the late 70s.
Re: Pipemakers in the 1970s
Chris Langan, Tom White made sets for people and people like Peadar McGuire learned a few bits from Matt K and turned out a few chanters. Ted Colgan made bits and pieces.
- Hans-Joerg
- Posts: 788
- Joined: Thu May 27, 2004 3:37 am
- Please enter the next number in sequence: 1
- Location: Germany, half an hour west of "Old Brunswick" (Braunschweig < Brunswieck)
Re: Pipemakers in the 1970s
Matt was a policeman. What was Dan?billh wrote:In any case I think it was virtually down to Matt and Dan for awhile - both amateur makers
- billh
- Posts: 2159
- Joined: Mon Jan 05, 2004 6:15 am
- Please enter the next number in sequence: 1
- Location: Skerries, County Dublin
- Contact:
Re: Pipemakers in the 1970s
As waymer suggests, the list gets crowded (though mostly with newcomers) in the late '70's.
It's perhaps more interesting to consider the mid-60's to early '70's, i.e. around the 1968 Bettystown gathering when a (successful!) last-ditch effort at a revival was launched.
Many of the folks in the mid-70's list were just stopping a gap; because someone made 2 chanters in 1971, should they be counted? Yes and no...
It's perhaps more interesting to consider the mid-60's to early '70's, i.e. around the 1968 Bettystown gathering when a (successful!) last-ditch effort at a revival was launched.
Many of the folks in the mid-70's list were just stopping a gap; because someone made 2 chanters in 1971, should they be counted? Yes and no...
Re: Pipemakers in the 1970s
A fireman.What was Dan?
A few of the people I mentioned had limited output but they did provide instruments to get people started, people otherwise unable to acquire pipes because of price or availability. They contributed in that way and are worthy of recognition.because someone made 2 chanters in 1971, should they be counted? Yes and no...
- pancelticpiper
- Posts: 5329
- Joined: Mon Jul 10, 2006 7:25 am
- antispam: No
- Please enter the next number in sequence: 8
- Tell us something.: Playing Scottish and Irish music in California for 45 years.
These days many discussions are migrating to Facebook but I prefer the online chat forum format. - Location: WV to the OC
Re: Pipemakers in the 1970s
Well all I know is that when I got interested in the pipes around 1976 that there didn't seem to be many options, at least over here in the US.
My first practice set was by McCarthy. Anyone have any more info on who this was and when he began making and ceased making pipes? It was an odd chanter, turned down very thin, almost like a Scottish chanter.
You can perhaps add to the list a maker in Los Angeles at that time, Richard Maheu, who made a bewildering variety of pipes. I still have his catalogue from that time, appropriately called "Bagpipes of All Kinds by Richard Maheu". He made Northumbrian pipes, Serbian, Bulgarian, Hungarian, Macedonian, Lowland Scots, several French types, etc etc.
I bought a set of concert D uilleann drones from him around 1977, and a full set of Lowland pipes. All of his pipes, no matter what type, had a funky Danish Modern look to them, and I've seen his pipes crop up in collections all over.
That was it until I bought a Quinn chanter in 1978 which I still play.
My first practice set was by McCarthy. Anyone have any more info on who this was and when he began making and ceased making pipes? It was an odd chanter, turned down very thin, almost like a Scottish chanter.
You can perhaps add to the list a maker in Los Angeles at that time, Richard Maheu, who made a bewildering variety of pipes. I still have his catalogue from that time, appropriately called "Bagpipes of All Kinds by Richard Maheu". He made Northumbrian pipes, Serbian, Bulgarian, Hungarian, Macedonian, Lowland Scots, several French types, etc etc.
I bought a set of concert D uilleann drones from him around 1977, and a full set of Lowland pipes. All of his pipes, no matter what type, had a funky Danish Modern look to them, and I've seen his pipes crop up in collections all over.
That was it until I bought a Quinn chanter in 1978 which I still play.
Richard Cook
c1980 Quinn uilleann pipes
1945 Starck Highland pipes
Goldie Low D whistle
c1980 Quinn uilleann pipes
1945 Starck Highland pipes
Goldie Low D whistle
- bradhurley
- Posts: 2330
- Joined: Wed Oct 09, 2002 6:00 pm
- Please enter the next number in sequence: 1
- Location: Montreal
- Contact:
Re: Pipemakers in the 1970s
Joe McKenna was still making pipes in the late 1970s: I bought a practice set from him in 78 or 79. His younger brother was working with him on pipes as well.
- Wannabe-Piper
- Posts: 153
- Joined: Wed Nov 01, 2006 11:36 am
- antispam: No
- Please enter the next number in sequence: 8
- Location: Australia
Re: Pipemakers in the 1970s
[quote="billh"]
In any case I think it was virtually down to Matt and Dan for awhile - both amateur makers - anyone know when Alf Kennedy stopped making altogether? I suspect there was a period when there were no fulltime professional makers at all.
quote]
Well yes, amateur makers, but both fine makers who made some fantastic instruments, though I'm not sure if there are many Dowd sets still being played?? Perhaps someone could clarify.
Not too sure bout Alf Kennedy, but he made great instruments. Played a full set of his a while back, and even though the set was leaking like a sieve you could still hear the lovely tone from the instrument.
In any case I think it was virtually down to Matt and Dan for awhile - both amateur makers - anyone know when Alf Kennedy stopped making altogether? I suspect there was a period when there were no fulltime professional makers at all.
quote]
Well yes, amateur makers, but both fine makers who made some fantastic instruments, though I'm not sure if there are many Dowd sets still being played?? Perhaps someone could clarify.
Not too sure bout Alf Kennedy, but he made great instruments. Played a full set of his a while back, and even though the set was leaking like a sieve you could still hear the lovely tone from the instrument.
- misterpatrick
- Posts: 597
- Joined: Wed Jul 14, 2004 9:20 am
- Please enter the next number in sequence: 1
- Location: Saint Paul, Minnesota
Re: Pipemakers in the 1970s
Really interesting stuff. I love hearing about the various periods in the history of our instrument. I first got interested in the uilleann pipes back in the early 80's when I was living in Austria. An interest was about all one could have as the chances of getting my hands on a set back then was next to nothing.
So what led to the current renaissance that we are experiencing? Can anyone write more about the "dark years"?
So what led to the current renaissance that we are experiencing? Can anyone write more about the "dark years"?
Re: Pipemakers in the 1970s
I don't know, there was at least one guy from Austria (and others from all over) coming to WCSS during the early to mid 80s. Not a bad player either. I forget his name but must have some pics somewhere.I first got interested in the uilleann pipes back in the early 80's when I was living in Austria. An interest was about all one could have as the chances of getting my hands on a set back then was next to nothing.
- Cathy Wilde
- Posts: 5591
- Joined: Mon Oct 20, 2003 4:17 pm
- antispam: No
- Please enter the next number in sequence: 8
- Location: Somewhere Off-Topic, probably
Re: Pipemakers in the 1970s
I don't know if this counts, but when I met Michael Vignoles in the late 1990s, I remember him saying his family had been making pipes -- in Galway, IIRC? -- for a long time.
Also, John Pedersen in California (sp?) who I'm beginning to suspect made my chanter, has been making pipes for 25 years (at least that's what his web page says).
Seems like it was a bit of a black art for a while, there?
Also, John Pedersen in California (sp?) who I'm beginning to suspect made my chanter, has been making pipes for 25 years (at least that's what his web page says).
Seems like it was a bit of a black art for a while, there?