tip cutter
- AaronMalcomb
- Posts: 2205
- Joined: Sat May 25, 2002 6:00 pm
- antispam: No
- Location: Bellingham, WA
tip cutter
Does this tool have another name? Is it something that can be attained at a hardware store or is it only a reedmaking tool? Here's a picture if you don't know what I mean.
- ceadach
- Posts: 207
- Joined: Wed Sep 20, 2006 5:03 pm
- antispam: No
- Please enter the next number in sequence: 8
- Tell us something.: I am not spammer, I am a human being!! More power to those that foil them!!! The brown fox jumped over the red fence, for what reason, we can not tell you...
- Location: St. Paul, MN USA
- Contact:
A.K.A. bull nose or snub nose pincers. Handy for cutting wire, especially cutting it close to something else you don't want to cut.
"Kindness is a mark of faith, and whoever has not kindness has not faith."
Muhammad
"Immature poets imitate; mature poets steal; bad poets deface what they take, and good poets make it into something better, or at least something different."
T.S. Eliot
Muhammad
"Immature poets imitate; mature poets steal; bad poets deface what they take, and good poets make it into something better, or at least something different."
T.S. Eliot
- Joseph E. Smith
- Posts: 13780
- Joined: Sat Mar 06, 2004 2:40 pm
- antispam: No
- Location: ... who cares?...
- Contact:
I've seen 'em used for cutting tails, but not for cutting lips... yet...
In the videos of reedmaking that Big Davy provided links to in the youtube thread, the bloke there uses nippers...
http://chiffboard.mati.ca/viewtopic.php ... &start=285
13th topic down.
I also have it from an unreliable source that our own djm uses these to aid in keeping his unibrow a secret.
In the videos of reedmaking that Big Davy provided links to in the youtube thread, the bloke there uses nippers...
http://chiffboard.mati.ca/viewtopic.php ... &start=285
13th topic down.
I also have it from an unreliable source that our own djm uses these to aid in keeping his unibrow a secret.
- CHasR
- Posts: 2464
- Joined: Wed Jul 26, 2006 8:48 pm
- antispam: No
- Please enter the next number in sequence: 8
- Location: canned tuna-aisle 6
Ive tried them for tip cutting...
BTW, there's a professional Bassoonist's model specifically designed for the task, try Forrests (in Frisco?) works for bassoon, but havent tried it personally;
I have tried wire nippers for tip cutting, with effective, but marginal results.
Also have tried anvil-pruning shears, somewhat better.
BTW, there's a professional Bassoonist's model specifically designed for the task, try Forrests (in Frisco?) works for bassoon, but havent tried it personally;
I have tried wire nippers for tip cutting, with effective, but marginal results.
Also have tried anvil-pruning shears, somewhat better.
- AaronMalcomb
- Posts: 2205
- Joined: Sat May 25, 2002 6:00 pm
- antispam: No
- Location: Bellingham, WA
That's the video that I got the idea from and found the image off of an oboe reed site. The gent in the video, Colin Ross, is considered the main man behind the SSP revival... but that is getting into non-UP territory.Joseph E. Smith wrote:In the videos of reedmaking that Big Davy provided links to in the youtube thread, the bloke there uses nippers...
http://chiffboard.mati.ca/viewtopic.php ... &start=285
- rorybbellows
- Posts: 3195
- Joined: Sun Dec 14, 2003 7:50 am
- antispam: No
- Please enter the next number in sequence: 10
- Location: the cutting edge
- billh
- Posts: 2159
- Joined: Mon Jan 05, 2004 6:15 am
- Please enter the next number in sequence: 1
- Location: Skerries, County Dublin
- Contact:
That's what is meant by "anvil pruning shears". If not *very* sharp, it will leave a nasty ragged edge, tear fibers, etc. Then there is the problem of the blade blunting against the metal anvil... presumably the bassoonists' model has a softer anvil surface and a very sharp blade.rorybbellows wrote:Andreas Rogge uses a cutter similar to this one ,its a type of mitre cutter !!
RORY
Bill
- rorybbellows
- Posts: 3195
- Joined: Sun Dec 14, 2003 7:50 am
- antispam: No
- Please enter the next number in sequence: 10
- Location: the cutting edge
billh wrote:That's what is meant by "anvil pruning shears". If not *very* sharp, it will leave a nasty ragged edge, tear fibers, etc. Then there is the problem of the blade blunting against the metal anvil... presumably the bassoonists' model has a softer anvil surface and a very sharp blade.rorybbellows wrote:Andreas Rogge uses a cutter similar to this one ,its a type of mitre cutter !!
RORY
Bill
I think the one andreas uses has a removable blade (a stanley knife blade) so you can change them very regularly and always insure they are sharp
RORY
I'm Spartacus .