So far i have used the Mark Shepard percentages ratio for marking out flute hole positions on my pvc flutes and obtained reasonably good results.
A software called WIDesigner is available to calculate the flute dimension.
I have tried to install this with little result.
Are there any simplified instructions available anywhere for non technical people on how to install this software.
WIDesigner
-
- Posts: 1423
- Joined: Sun Dec 05, 2010 2:59 pm
- antispam: No
- Please enter the next number in sequence: 10
- Location: Southwestern Ontario
Re: WIDesigner
Have you watched the installation video at http://youtu.be/nDlKJURdHfw ?
What platform are you trying to install it on (Windows, Mac, Linux)?
In general, you will need to:
- Download and install Java from https://www.java.com/en/download/
- Download the WIDesigner zip file from https://github.com/edwardkort/WWIDesign ... ses/latest
- Copy the contents of the zip file to a folder on your disk drive.
Once you've done that, you should be able to start WIDesigner by double-clicking on the WIDesigner-2.6.0.jar file in the new folder.
Let me know how it goes.
What platform are you trying to install it on (Windows, Mac, Linux)?
In general, you will need to:
- Download and install Java from https://www.java.com/en/download/
- Download the WIDesigner zip file from https://github.com/edwardkort/WWIDesign ... ses/latest
- Copy the contents of the zip file to a folder on your disk drive.
Once you've done that, you should be able to start WIDesigner by double-clicking on the WIDesigner-2.6.0.jar file in the new folder.
Let me know how it goes.
-
- Posts: 15
- Joined: Sun May 19, 2013 7:57 am
- antispam: No
- Please enter the next number in sequence: 8
Re: WIDesigner
Thank you Tunborough,
I will try that and let you know how i get on.
I will try that and let you know how i get on.