storing the flute: keep bottom pieces together or apart?
- tin tin
- Posts: 1314
- Joined: Tue Jun 25, 2002 6:00 pm
- antispam: No
- Please enter the next number in sequence: 8
- Tell us something.: To paraphrase Mark Twain, a gentleman is someone who knows how to play the spoons and doesn't. I'm doing my best to be a gentleman.
storing the flute: keep bottom pieces together or apart?
I'm having a new case made for my flute, and I'm considering the layout options. I see quite a few cases designed to have the two bottom two joints kept together. (Like this.) That layout makes for a nice compact case, but are there any potential problems, like compressing the cork? Can anyone make the case (pardon the pun) for keeping the lower joints together or apart?
- Jayhawk
- Posts: 3940
- Joined: Tue Oct 15, 2002 6:00 pm
- antispam: No
- Please enter the next number in sequence: 8
- Tell us something.: Well, just trying to update my avatar after a decade. Hope this counts! Ok, so apparently I must babble on longer.
- Location: Lawrence, KS
- Contact:
Re: storing the flute: keep bottom pieces together or apart?
I've always kept the parts together, but the cork on the lower section of my M&E has compressed with time (now about 5 or so years) and I wrapped a layer of plumbers tape to tighten it up. Granted, the flute doesn't receive much playing time now (and maybe the lack of humidity has caused the cork to shrink) that I have my antique flute, which is also stored with the bottom joints together (these are thread wrapped, though).
I'm sure someone with years more experience will chime in, but it seems more common to keep them together.
Eric
I'm sure someone with years more experience will chime in, but it seems more common to keep them together.
Eric
- Unseen122
- Posts: 3542
- Joined: Tue May 04, 2004 7:21 pm
- antispam: No
- Please enter the next number in sequence: 8
- Tell us something.: Of course I'm not a bot; I've been here for years... Apparently that isn't enough to pass muster though!
- Location: Los Angeles, CA
- Contact:
Re: storing the flute: keep bottom pieces together or apart?
I've often seen people keep them together, but I never really thought it was a good idea. I don't think it's a good idea because you run the risk of cork or thread expanding which will make the two pieces stick together, or as Eric mentioned cork or thread compressing over time not a big deal with thread but it is annoying with cork. There seem to be a lot of people doing it without any problems though. So I'd say keeping them apart is the safer option and given an option why not go for the safer one?
Re: storing the flute: keep bottom pieces together or apart?
FWIW, I've kept them together on several flutes for years--no bad effects, considerable convenience.
Was advised to do so by one flute maker I respect considerably. The slight risks are worth the convenience, IMO.
Was advised to do so by one flute maker I respect considerably. The slight risks are worth the convenience, IMO.
- Jon C.
- Posts: 3526
- Joined: Wed Nov 07, 2001 6:00 pm
- antispam: No
- Please enter the next number in sequence: 8
- Tell us something.: I restore 19th century flutes, specializing in Rudall & Rose, and early American flutes. I occasionally make new flutes. Been at it for about 15 years.
- Location: San Diego
Re: storing the flute: keep bottom pieces together or apart?
Here is a interesting example: Flute from the 1830's assembled it's whole life, no cracks in the sockets, and all the tenons that were together did not warp, the only tenon that warped was the one exposed.
"I love the flute because it's the one instrument in the world where you can feel your own breath. I can feel my breath with my fingers. It's as if I'm speaking from my soul..."
Michael Flatley
Jon
Michael Flatley
Jon
-
- Posts: 355
- Joined: Thu Jun 29, 2006 8:37 pm
- antispam: No
- Please enter the next number in sequence: 8
- Tell us something.: Very much enjoy all flutes, bagpipes and whistles. I'm an older player; however, an active learner. I take current lessons from an Irish Flute tutor, a Boehm Flute tutor and a Highland Bagpipe tutor. I'm a great believer in lessons and without the assistance of a tutor, I find that I would be repeating the same mistakes over and over again, making me proficient in poor music.
- Location: U.S.A.
Re: storing the flute: keep bottom pieces together or apart?
I know it's off topic, but I've just got to comment on what a beautiful flute that is, couldn't help myself.
- Jon C.
- Posts: 3526
- Joined: Wed Nov 07, 2001 6:00 pm
- antispam: No
- Please enter the next number in sequence: 8
- Tell us something.: I restore 19th century flutes, specializing in Rudall & Rose, and early American flutes. I occasionally make new flutes. Been at it for about 15 years.
- Location: San Diego
Re: storing the flute: keep bottom pieces together or apart?
The flute is only marked "Atwill's Music Salon" it is in the style possibly of a American maker, say Peloubet, but who knows... Atwill's was a well known dealer in the US.psychodonald wrote:I know it's off topic, but I've just got to comment on what a beautiful flute that is, couldn't help myself.
"I love the flute because it's the one instrument in the world where you can feel your own breath. I can feel my breath with my fingers. It's as if I'm speaking from my soul..."
Michael Flatley
Jon
Michael Flatley
Jon
Re: storing the flute: keep bottom pieces together or apart?
My ersatz 1840 rudall is from Atwill's Music Salon. Maybe some of the flutes they sold were imported....
Re: storing the flute: keep bottom pieces together or apart?
I'm currently playing the hell out of that Atwell as Jon was kind enough to lend it out to have it run through it's paces. Nothing wrong with the tenons. I think it might just benefit boxwood being supported by it's supported combined tenon and joint.
Aanvil
-------------------------------------------------
I am not an expert
-------------------------------------------------
I am not an expert
- Sirchronique
- Posts: 1014
- Joined: Sun Sep 09, 2012 9:56 pm
- antispam: No
- Please enter the next number in sequence: 8
- Tell us something.: I like whistles, flutes, lyres, cittern/mandolin/bouzouki family instruments, as well as heavy and nasty slap bass. Languages, linguistics, history (especially Migration Period and Bronze Age Europe), cuisine from various parts of Latin America, chili growing, bushcraft, and the works of JRR Tolkien also tickle my fancy.
- Location: Southern Indiana
Re: storing the flute: keep bottom pieces together or apart?
I was also wondering if keeping it together for long periods is bad for the cork, or at least, wondering if it would cause any need for recorking it within a short span of time. I keep my delrin Baubet flute assembled for about 4 hours straight on some days, because I put it together when I get home from work and leave it on the table assembled and pick it up many times between the time I get off work and the time I go to bed . I was wondering if even that is okay to do. Does this mean I am probably safe to just leave it like that from the time I wake up until the time I go to bed? I would never do it with my wood flute, as I'm pretty obsessive about keepin it well swabbed, and it's wood... but, this one is delrin so, I guess there is no reason to take it apart and put it together a million times each day, hm?
- Peter Duggan
- Posts: 3232
- Joined: Tue Aug 30, 2011 5:39 pm
- antispam: No
- Please enter the next number in sequence: 8
- Tell us something.: I'm not registering, I'm trying to edit my profile! The field “Tell us something.” is too short, a minimum of 100 characters is required.
- Location: Kinlochleven
- Contact:
Re: storing the flute: keep bottom pieces together or apart?
FWIW, I keep the corked sections (D and Eb bodies) of my Copley Delrin pretty well permanently assembled except when I need to put it in its case and have never had any trouble with the cork. But curiously find that the Delrin-to-Delrin fit of head to either body benefits from some periods of 'empty' relaxation, so take that apart occasionally (not daily unless changing bodies) when otherwise leaving it assembled.Sirchronique wrote:I keep my delrin Baubet flute assembled for about 4 hours straight on some days, because I put it together when I get home from work and leave it on the table assembled and pick it up many times between the time I get off work and the time I go to bed . I was wondering if even that is okay to do. Does this mean I am probably safe to just leave it like that from the time I wake up until the time I go to bed?
Re. Delrin, see above. Always take my wood flute apart and swab it out, but perhaps those who keep them partially assembled are doing same before reassembling?I would never do it with my wood flute, as I'm pretty obsessive about keepin it well swabbed, and it's wood... but, this one is delrin so, I guess there is no reason to take it apart and put it together a million times each day, hm?
- jemtheflute
- Posts: 6978
- Joined: Tue May 23, 2006 6:47 am
- antispam: No
- Please enter the next number in sequence: 8
- Location: N.E. Wales, G.B.
- Contact:
Re: storing the flute: keep bottom pieces together or apart?
Most antique cases provide for the lower body and foot joints to be stowed assembled. Long experience, in particular with my main R&R, does not suggest this causes any problems. I have never tended even to separate those parts to swab separately/in the socket when stowing away. It sure wouldn't hurt so to do, though, especially if you have a joint which you know to be prone to collecting water (their fit varies!). Nor do I tend to swab out a flute I have out when I stop playing - I just stand it vertically to drain (in a safe place/fashion!). So, to respond directly to the OP query, I do not think this is an issue worth much worry - design your case to your preferences. However, if you did decide to have separate compartments for separated joints, that would not add significantly to the length of a 3-slot case - it would just need to be a little longer (the length of the tenon and the width of a separator - maybe an inch or so.....) and have a separator in their slot between them. If you decide you are going to separate them, you could have a longer, slimmer case by stowing the foot in the same line/slot as the head/barrel and the two body joints in a second slot, which might be a more elegant solution. I have refitted modern B-foot Böhm flute cases for simple system flutes in this configuration (pics in old case threads somewhere.....).
I respect people's privilege to hold their beliefs, whatever those may be (within reason), but respect the beliefs themselves? You gotta be kidding!
My YouTube channel
My FB photo albums
Low Bb flute: 2 reels (audio)
Flute & Music Resources - helpsheet downloads
My YouTube channel
My FB photo albums
Low Bb flute: 2 reels (audio)
Flute & Music Resources - helpsheet downloads
- johnkerr
- Posts: 1001
- Joined: Wed Apr 17, 2002 6:00 pm
- Please enter the next number in sequence: 1
- Location: Falls Church VA USA
Re: storing the flute: keep bottom pieces together or apart?
Patrick Olwell has told me it's okay to store the flute with the bottom two pieces together, provided you pull them apart just a bit (1/16th to 1/8th of an inch) instead of keeping them flush. He even told me why it's important to have that separation, but I forget.
- Rob Sharer
- Posts: 1682
- Joined: Tue Jul 18, 2006 7:32 am
- Please enter the next number in sequence: 1
- Location: Either NC, Co. Clare, or Freiburg i.B., depending...
Re: storing the flute: keep bottom pieces together or apart?
My recollection of Patrick's explanation is that it allows the cork to dry.johnkerr wrote:Patrick Olwell has told me it's okay to store the flute with the bottom two pieces together, provided you pull them apart just a bit (1/16th to 1/8th of an inch) instead of keeping them flush. He even told me why it's important to have that separation, but I forget.
Rob
-
- Posts: 1425
- Joined: Sun Dec 05, 2010 2:59 pm
- antispam: No
- Please enter the next number in sequence: 10
- Location: Southwestern Ontario
Re: storing the flute: keep bottom pieces together or apart?
No one's mentioned it, but I would think that (other things being equal), repeated assembly/disassembly would increase wear and tear on a joint.