How do you transport your whistles?

The Ultimate On-Line Whistle Community. If you find one more ultimater, let us know.
goldthorpe
Posts: 51
Joined: Mon Aug 20, 2001 6:00 pm
Please enter the next number in sequence: 1
Location: california
Contact:

Post by goldthorpe »

I make individual cases out of one and a quarter inch PVC. I wrap the whistle in fine
bubble wrap and slide it in the tube.It is
very snug. The tubing costs less than a dollar and the caps cost pennies. I glue the bottom cap in place and label the tube. When I am
travelling the whistle is very protected.
It isn't very exotic but it it works.
goldthorpe
Posts: 51
Joined: Mon Aug 20, 2001 6:00 pm
Please enter the next number in sequence: 1
Location: california
Contact:

Post by goldthorpe »

I make individual cases out of one and a quarter inch PVC. I wrap the whistle in fine
bubble wrap and slide it in the tube.It is
very snug. The tubing costs less than a dollar and the caps cost pennies. I glue the bottom cap in place and label the tube. When I am
travelling the whistle is very protected.
It isn't very exotic but it it works.
jim_mc
Posts: 1303
Joined: Tue Sep 11, 2001 6:00 pm
antispam: No
Please enter the next number in sequence: 8
Tell us something.: I'm a New York native who gradually slid west and landed in the Phoenix area. I like riding on the back seat of a tandem bicycle. I like dogs and have three of them. I am a sometime actor and an all the time teacher, husband, and dad.
Location: Surprise, AZ

Post by jim_mc »

Here's a whistle case recipe from Robert McElroy's Bloody Hands whistle set instructions (which I don't feel bad borrowing, since Robert borrowed it from me in the first place):

Here's a recipe for making a simple PVC case from Jim Mc. First, buy a length of 1" or 1 1/4" PVC,
two matching caps and a sheet of air conditioner filter foam. Cut the pipe to a little more than the
length of the whistle and smooth out the cut end with some sandpaper. Cut a strip of foam as long as
the pipe and wide enough to line the pipe when rolled into the pipe. Cut two circular pieces of foam to
line the caps. Affix one of the caps with PVC pipe solvent. Wax the inside wall of the other cap with
your whistle tweaking beeswax.

Here's the link to Robert's whole piece:

http://www.geocities.com/dwisely/bloodyhand.htm
User avatar
ScottStewart
Posts: 370
Joined: Thu Jul 12, 2001 6:00 pm
Please enter the next number in sequence: 1
Location: flyover country

Post by ScottStewart »

I use a softside pool cue case I bought from K-Mart for $12. It unzips at the top. I put three golf club tubes inside, and it holds two low whistles and an Olwell cane D flute nicely. Someone mentioned using tubes of some sort, here's a link if anyone wants to use wooden tubes that look nice and are durable - http://www.brandnew.net/hollowood/holwood.shtml
It's called Hollowood. BTW, I just noticed, some of this Hollowood looks like it could be used for making a low whistle. Wooden that be cool, a wooden low D!

<font size=-1>[ This Message was edited by: ScottStewart on 2002-01-18 21:42 ]</font>
User avatar
NancyF
Posts: 367
Joined: Tue Jun 26, 2001 6:00 pm
Please enter the next number in sequence: 1
Location: Tahlequah, OK

Post by NancyF »

I just sew up tool-roll style whistle rolls from an upholstry fabric or similar, lined with quilting fabric and a light padding. I've made them for up to A's and up to 14 slots. They Velcro TM shut and have a shoulder strap or a handle. For low whistles, I've made tube style bags with a plastic stiffener. --- Nancy F

PS, I can't figure out how to post a pic, but email me and I'll send you one.
User avatar
Loren
Posts: 8393
Joined: Fri Jun 29, 2001 6:00 pm
antispam: No
Please enter the next number in sequence: 8
Tell us something.: You just slip out the back, Jack
Make a new plan, Stan
You don't need to be coy, Roy
Just get yourself free
Hop on the bus, Gus
You don't need to discuss much
Just drop off the key, Lee
And get yourself free
Location: Loren has left the building.

Post by Loren »

Since I haven't heard anyone mention either of the cases I use, here's a couple of other options:

A while back I got a really cool cordura covered hard case from Colin Goldie. It's rectangular with handles and a should strap. The inside has three different slots and can be configured to hold to three low whistles, six high whistles, or a combination of both. The interior is plushly lined with a crushed black velvet like material.

This is by far the nicest whistle case I've ever seen and seems to me the perfect thing for sessions as you could carry a Low D, Low F, and a couple of sopranos or, alternately, you could pack it with an Irish flute an A or Bb whistle and two soprano whistles. Sorry but I don't remember the cost off hand.

The other useful case I have that was less expensive and holds more whistles is here: http://www.oregonflutestore.com/bags.html This site has some really cool stuff, but most of the Flute Quivers are fairly expensive. However, if you scroll down the page to the "Crow" model, you'll find it's only $36. I bought one of these over a year ago and used it quite a bit until I got the case from Colin. Now I use the Crow less, but I still prefer it at times because it will hold whistles a large as a low C, and, depending on how you pack the quiver, you can get a ton of whistles in it - well over a dozen including several Low Whistles and a bunch of sopranos. I think this case gives great bang for the buck.

There you go, two more options.

Loren
User avatar
PhilO
Posts: 2931
Joined: Wed Jun 27, 2001 6:00 pm
Please enter the next number in sequence: 1
Location: New York

Post by PhilO »

Loren - I too like the Crow. Philo
User avatar
Loren
Posts: 8393
Joined: Fri Jun 29, 2001 6:00 pm
antispam: No
Please enter the next number in sequence: 8
Tell us something.: You just slip out the back, Jack
Make a new plan, Stan
You don't need to be coy, Roy
Just get yourself free
Hop on the bus, Gus
You don't need to discuss much
Just drop off the key, Lee
And get yourself free
Location: Loren has left the building.

Post by Loren »

Hey, Cool Phil,

I didn't realize anyone else out there had one since they never seem to come up on the message board.

Loren
BigEvilGrape
Posts: 40
Joined: Sat Dec 01, 2001 6:00 pm
Please enter the next number in sequence: 1
Location: conectiucut and vermont

Post by BigEvilGrape »

well usualy they're just in my pocket,other then that i have a soft case that came with my susato low A, i'm planing on making a tool-roll style case when i get around to it.
User avatar
tubafor
Posts: 191
Joined: Thu Sep 20, 2001 6:00 pm
Please enter the next number in sequence: 1
Location: Grand Rapids, MI
Contact:

Post by tubafor »

As a follow-up to this thread, after reading all the responses, I bought a Vic Firth / Alec Acuna stick bag from Musician's Friend. This thing is HUGE! Can easily hold 12-15 whistles in the inside pockets, and has another 4 pockets around the outside, which hold my low D and C's in padded whistle pouches. I'm thinkin' that it will even hold my microphone, cables, and Nanoverb effects unit. Way cool! Thanks everyone for the suggestion of a stick bag - I never would have thought of that!

Cal
"Vocatus, atque non vocatus, Deus aderit..."
------------------------------------------
Cal Olson
Whistles, Windsynth and other toys...
Hear samples from my CD "Angelica's Waltz" at:
www.myspace.com/praisewhistler
User avatar
avanutria
Posts: 4750
Joined: Wed Aug 15, 2001 6:00 pm
antispam: No
Please enter the next number in sequence: 8
Tell us something.: A long time chatty Chiffer but have been absent for almost two decades. Returned in 2022 and still recognize some names! I also play anglo concertina now.
Location: Eugene, OR
Contact:

Post by avanutria »

On 2002-01-29 20:09, tubafor wrote:
...I bought a Vic Firth / Alec Acuna stick bag from Musician's Friend...
Here's the beast...

<img src="http://img.musiciansfriend.com/dbase/pi ... 443966.jpg">

http://www.musiciansfriend.com/

<font size=-1>[ This Message was edited by: avanutria on 2002-01-29 20:26 ]</font>
BobP
Posts: 32
Joined: Tue Jun 26, 2001 6:00 pm
Please enter the next number in sequence: 1
Location: Maryland Eastern shore

Post by BobP »

For those who are sewing impaired, like me, attractive alternatives are offered by Tuffbaggs - http://www.tuffbaggs.com They are available in 4 different sizes, that is, for different length whistles, and in several different colors. Best of all, the owner, Kate Rachel lozier is just wonderful to work with. Top notch service.
User avatar
WyoBadger
Posts: 2708
Joined: Wed Jun 27, 2001 6:00 pm
antispam: No
Please enter the next number in sequence: 8
Tell us something.: "Tell us something" hits me a bit like someone asking me to tell a joke. I can always think of a hundred of them until someone asks me for one. You know how it is. Right now, I can't think of "something" to tell you. But I have to use at least 100 characters to inform you of that.
Location: Wyoming

Post by WyoBadger »

I use the "whistling burrito"--a piece of thick, grey wool blanket of the type you get in army surplus stores. I used most of the fabric to make an arrow quiver, but the piece that remains, about 3 or 4 feet square I'd guess, makes a great whistle bag.

I just lie the blanket flat, put the whistles on it, fold the tops over like a burrito so they overlap, then roll it up tightly, tying it with a piece of chord or buckskin. It will snugly hold as many or as few whistles as I want to take, it keeps them warm (I'm thinking about throwing a couple chemical hand warmers in as an anti-condensation device), the whistles can't move or bang against each other, and they are well padded by at least three layers of wool.

I've been using this for several months now, having tried various other methods (the guys in my band particularly appreciated the old sock bag--guaranteed to keep your whistles from getting stolen!). The only problem with the burrito bag is that it's a bit cumbersome to unroll at a crowded session.

Tom
AnnaDMartinez
Posts: 1211
Joined: Sun Jul 01, 2001 6:00 pm
antispam: No
Please enter the next number in sequence: 8
Tell us something.: Good to be home, many changes here, but C&F is still my home! I think about the "old" bunch here and hold you all in the light, I am so lucky to have you all in my life!

Post by AnnaDMartinez »

I throw 'em in my purse and go! They're pretty banged up, except for my Tully and I throw the BOX it came in my purse with the rest of 'em

_________________
Let it shine! Anna "Dances with Weasels" Martinez

<font size=-1>[ This Message was edited by: Anna Martinez on 2002-01-30 14:55 ]</font>
thesackrat
Posts: 37
Joined: Fri Jul 13, 2001 6:00 pm

Post by thesackrat »

If your main interest is safe/secure storage and transport this might work for you. I got a tool box at the builder's supply that's big enough to hold most all of my higher priced whistles. It's yellow plastic with a black handle and trim and cost just over $13. The shorter whistles (in bags or wrap) fit nicely in the bottom section and the top tray holds everything "up" to a low D. The low C and low B, however, are to long for this case. It even supports a pad-lock feature that is very handy for keeping casual persons from going through your whistles. Be prepared for "odd looks", though, if you carry it to a session.
Post Reply