Cross fingerings for G# and Bb across different D whistles?
-
- Posts: 15
- Joined: Fri Aug 17, 2018 8:05 am
- antispam: No
- Please enter the next number in sequence: 8
- Tell us something.: This information has been removed due to this account being inactive for an extended period of time.
Cross fingerings for G# and Bb across different D whistles?
A while ago I stumbled upon cross fingerings for G# and Bb on a D whistle.
G#: XXOXXX Bb: XOXXXO
These work really well on my one D whistle (Tony Dixon DX005 polymer whistle with brass slide).
However, these pretty much do not work on most of my other whistles (Generations and Tony Dixon Trads in brass). I can barely hit the intended notes by blowing ridiculously softly you can barely hear it.
Why this inconsistency across D whistles? I assume bore size, hole size / placement, and head construction all affect it?
Anyone else have experience messing around with these particular cross fingerings? Am I the only one who has found I can only use them on certain specific whistles?
Is there a way to know what brands / models of whistle will be capable of utilizing these cross fingerings without extensive trial and error (expensive when you don't have a good local whistle shop)?
G#: XXOXXX Bb: XOXXXO
These work really well on my one D whistle (Tony Dixon DX005 polymer whistle with brass slide).
However, these pretty much do not work on most of my other whistles (Generations and Tony Dixon Trads in brass). I can barely hit the intended notes by blowing ridiculously softly you can barely hear it.
Why this inconsistency across D whistles? I assume bore size, hole size / placement, and head construction all affect it?
Anyone else have experience messing around with these particular cross fingerings? Am I the only one who has found I can only use them on certain specific whistles?
Is there a way to know what brands / models of whistle will be capable of utilizing these cross fingerings without extensive trial and error (expensive when you don't have a good local whistle shop)?
- Sedi
- Posts: 993
- Joined: Sun May 01, 2016 6:54 am
- antispam: No
- Please enter the next number in sequence: 8
- Tell us something.: Practice, practice, practice. You're never too old to learn.
Keep on fluting.
---u---o-o-o--o-o-o--
-----------------------
Re: Cross fingerings for G# and Bb across different D whistl
From my experience those fingerings only work on whistles with a thick wall -- like the Dixon you mentioned, or similar plastic whistles, like Susatos. It also works on the Dixon DX204 and on alloy whistles with equally thick walls, like a Chieftain or Shearwater and probably on other alloy whistles like Alba or Goldie whistles, etc. It doesn't work ony any thin-walled whistles like Generations, Feadogs, Clarkes or Carbony, etc.
Edit: it will probably also work on wooden whistles.
Edit: it will probably also work on wooden whistles.
-
- Posts: 15
- Joined: Fri Aug 17, 2018 8:05 am
- antispam: No
- Please enter the next number in sequence: 8
- Tell us something.: This information has been removed due to this account being inactive for an extended period of time.
Re: Cross fingerings for G# and Bb across different D whistl
Interesting! Thanks! I never would have thought that the wall thickness would be the cause. But I guess that seems consistent so far with what I've observed...Sedi wrote:From my experience those fingerings only work on whistles with a thick wall -- like the Dixon you mentioned, or similar plastic whistles, like Susatos. It also works on the Dixon DX204 and on alloy whistles with equally thick walls, like a Chieftain or Shearwater and probably on other alloy whistles like Alba or Goldie whistles, etc. It doesn't work ony any thin-walled whistles like Generations, Feadogs, Clarkes or Carbony, etc.
Edit: it will probably also work on wooden whistles.
- eskin
- Posts: 2294
- Joined: Wed Jun 27, 2001 6:00 pm
- Please enter the next number in sequence: 1
- Location: Kickin' it Braveheart style...
- Contact:
Re: Cross fingerings for G# and Bb across different D whistl
I always half-hole both of those notes on the whistle.
- Sedi
- Posts: 993
- Joined: Sun May 01, 2016 6:54 am
- antispam: No
- Please enter the next number in sequence: 8
- Tell us something.: Practice, practice, practice. You're never too old to learn.
Keep on fluting.
---u---o-o-o--o-o-o--
-----------------------
Re: Cross fingerings for G# and Bb across different D whistl
Probably better as it works on every whistle.
-
- Posts: 15
- Joined: Fri Aug 17, 2018 8:05 am
- antispam: No
- Please enter the next number in sequence: 8
- Tell us something.: This information has been removed due to this account being inactive for an extended period of time.
Re: Cross fingerings for G# and Bb across different D whistl
That's definitely fine... Though I am finding the cross fingerings easier to do at speed. Half holing at speed is really a challenge. As far as speed goes, the cross fingerings feel just a bit different from a C nat, and you can put your fingers down at normal pressure and angle over the holes.eskin wrote:I always half-hole both of those notes on the whistle.
I guess quickly half placing a finger is just tricky for me (at this point anyway ... Playing whistle not quite a year).
- DrPhill
- Posts: 1610
- Joined: Wed Nov 19, 2008 11:58 am
- antispam: No
- Please enter the next number in sequence: 10
- Location: None
Re: Cross fingerings for G# and Bb across different D whistl
Sedi wrote:From my experience those fingerings only work on whistles with a thick wall ....... it will probably also work on wooden whistles.
Seem to play a reasonable note on a Bleazey low D in the low octave - but in the upper octave they give pitches higher than expected.
XXOXXX sounds sharp of A - maybe in Bb territory
XOXXXO sounds sharp of B - maybe Cnat
I will check these with a tuner sometime - if they are accurate I might use them. Different Cnat in the higher octave may open up possibilities.
I am not sure how much use G# and Bb are to me on a D whistle though.
Phill
One does not equal two. Not even for very large values of one.
One does not equal two. Not even for very large values of one.
- Peter Duggan
- Posts: 3224
- Joined: Tue Aug 30, 2011 5:39 pm
- antispam: No
- Please enter the next number in sequence: 8
- Tell us something.: I'm not registering, I'm trying to edit my profile! The field “Tell us something.” is too short, a minimum of 100 characters is required.
- Location: Kinlochleven
- Contact:
Re: Cross fingerings for G# and Bb across different D whistl
Forked fingerings always do. You need to take off one or more fingers from below the open hole for the second register. Exactly which varies from whistle to whistle.DrPhill wrote:but in the upper octave they give pitches higher than expected.
- DrPhill
- Posts: 1610
- Joined: Wed Nov 19, 2008 11:58 am
- antispam: No
- Please enter the next number in sequence: 10
- Location: None
Re: Cross fingerings for G# and Bb across different D whistl
I sort of expected that Peter, but I was not expecting the pitch of XXOXXX to be higher than XXOOOO, and the pitch of XOXXXO to be higher than XOOOOO.
Shows how much I know, doesn't it.
Shows how much I know, doesn't it.
Phill
One does not equal two. Not even for very large values of one.
One does not equal two. Not even for very large values of one.
-
- Posts: 1468
- Joined: Tue Jun 26, 2001 6:00 pm
- antispam: No
- Please enter the next number in sequence: 8
- Tell us something.: I've been playing whistle for a very long time, but never seem to get any better than I was about 10 years ago. I'm okay with that. :)
- Location: Bloomington, Indiana
Re: Cross fingerings for G# and Bb across different D whistl
On this topic (more/less), I never have gotten around to trying one of the keyed Sweet whistles. Has anyone played one of those? Do they work well?
I did a search and found several old discussions. Synopsis: While the keyed Sweet whistle gets very good general reviews, the high A and B take a lot of air/pressure and are overly loud.
-Brett
I did a search and found several old discussions. Synopsis: While the keyed Sweet whistle gets very good general reviews, the high A and B take a lot of air/pressure and are overly loud.
-Brett
Last edited by Bretton on Fri Nov 16, 2018 10:35 am, edited 1 time in total.
-
- Posts: 15
- Joined: Fri Aug 17, 2018 8:05 am
- antispam: No
- Please enter the next number in sequence: 8
- Tell us something.: This information has been removed due to this account being inactive for an extended period of time.
Re: Cross fingerings for G# and Bb across different D whistl
Who makes / sells these? What notes do the keys give?Bretton wrote:On this topic (more/less), I never have gotten around to trying one of the keyed Sweet whistles. Has anyone played one of those? Do they work well?
-Brett
-
- Posts: 15
- Joined: Fri Aug 17, 2018 8:05 am
- antispam: No
- Please enter the next number in sequence: 8
- Tell us something.: This information has been removed due to this account being inactive for an extended period of time.
Re: Cross fingerings for G# and Bb across different D whistl
They are mainly helpful when you try to play non-folk music on a whistle (hymns, etc. in my case).DrPhill wrote:Sedi wrote: I am not sure how much use G# and Bb are to me on a D whistle though.
- Peter Duggan
- Posts: 3224
- Joined: Tue Aug 30, 2011 5:39 pm
- antispam: No
- Please enter the next number in sequence: 8
- Tell us something.: I'm not registering, I'm trying to edit my profile! The field “Tell us something.” is too short, a minimum of 100 characters is required.
- Location: Kinlochleven
- Contact:
Re: Cross fingerings for G# and Bb across different D whistl
They're sharp third harmonics of bell D and low E respectively, vented and sharpened by the open holes. You can verify this by slurring from the fundamental, lifting the finger but barely raising the breath pressure, when they'll still speak at the 12th because of the vent but come back into tune through the lower pressure.DrPhill wrote:I sort of expected that Peter, but I was not expecting the pitch of XXOXXX to be higher than XXOOOO, and the pitch of XOXXXO to be higher than XOOOOO.
-
- Posts: 1468
- Joined: Tue Jun 26, 2001 6:00 pm
- antispam: No
- Please enter the next number in sequence: 8
- Tell us something.: I've been playing whistle for a very long time, but never seem to get any better than I was about 10 years ago. I'm okay with that. :)
- Location: Bloomington, Indiana
Re: Cross fingerings for G# and Bb across different D whistl
Zaulden: I'm not sure they're being made any more. They were made by Ralph Sweet (Sweetheart Flute Company: http://www.sweetheartflute.com), but he retired in 2017. Joseph Morneault (Musique Morneaux: http://musiquemorneaux.com) continues to make many instruments of the same design, but doesn't list the keyed whistle on his Website.zaulden wrote: Who makes / sells these? What notes do the keys give?
-Brett
- pancelticpiper
- Posts: 5326
- Joined: Mon Jul 10, 2006 7:25 am
- antispam: No
- Please enter the next number in sequence: 8
- Tell us something.: Playing Scottish and Irish music in California for 45 years.
These days many discussions are migrating to Facebook but I prefer the online chat forum format. - Location: WV to the OC
Re: Cross fingerings for G# and Bb across different D whistl
The other approach would be to use double holes as on a Recorder.
Since most whistles (in my experience) give good crossfingered C naturals and B flats you would only need doubled holes on these holes:
Hole 6: Eb, E natural
Hole 5: F natural, F sharp
Hole 3: G sharp, A natural
(and not necessary, but if you wished Hole 2: B flat, B natural)
Susato would be a natural (!) maker for these, as they already make recorders, and their whistles have the thick walls that make such things work better.
BTW it's quite amazing how good some players can get at half-holing. The best I've heard is the Asturian gaiteiro Vicente "El Praviano"; you would swear he has a hole drilled for the minor 3rd, or is using a crossfingering, but no, I've seen him play in person and it's half-holing done with exceptional precision.
Horrid accompaniment but a great demonstration of him half-holing the minor 3rd on the gaita:
https://www.youtube.com/watch?v=uAfwHdhYMls
Since most whistles (in my experience) give good crossfingered C naturals and B flats you would only need doubled holes on these holes:
Hole 6: Eb, E natural
Hole 5: F natural, F sharp
Hole 3: G sharp, A natural
(and not necessary, but if you wished Hole 2: B flat, B natural)
Susato would be a natural (!) maker for these, as they already make recorders, and their whistles have the thick walls that make such things work better.
BTW it's quite amazing how good some players can get at half-holing. The best I've heard is the Asturian gaiteiro Vicente "El Praviano"; you would swear he has a hole drilled for the minor 3rd, or is using a crossfingering, but no, I've seen him play in person and it's half-holing done with exceptional precision.
Horrid accompaniment but a great demonstration of him half-holing the minor 3rd on the gaita:
https://www.youtube.com/watch?v=uAfwHdhYMls
Richard Cook
c1980 Quinn uilleann pipes
1945 Starck Highland pipes
Goldie Low D whistle
c1980 Quinn uilleann pipes
1945 Starck Highland pipes
Goldie Low D whistle