Cutting Question
-
- Posts: 207
- Joined: Sat Aug 22, 2009 9:10 pm
- antispam: No
Cutting Question
This may sound like a crazy question and maybe I'm just having a brain drain day, but I am trying to figure out the simple technique for this situation.
If you have a Single Note cut, a single High E note, not followed by another High E note, on a D whistle and you cut with a High G, do you do that by the normal way of cutting, meaning with fingers ready to play an E but lifting the G finger to cut or do you play the G and then put fingers down to play the E, like you might in a grace note situation. Does it matter which way you do it? I have been putting fingers down for the E and cutting by lifting the G finger.
Hope this makes sense. I am a classical (legit) player and I understand cuts and am going through the Online Academy of Irish Music. In their version of O'Keefe's Dream, measure 5, they have a cut on a single High E and they use a grace note to notate a cut on the E with a G.
Just trying to get my Irish technique right!
If you have a Single Note cut, a single High E note, not followed by another High E note, on a D whistle and you cut with a High G, do you do that by the normal way of cutting, meaning with fingers ready to play an E but lifting the G finger to cut or do you play the G and then put fingers down to play the E, like you might in a grace note situation. Does it matter which way you do it? I have been putting fingers down for the E and cutting by lifting the G finger.
Hope this makes sense. I am a classical (legit) player and I understand cuts and am going through the Online Academy of Irish Music. In their version of O'Keefe's Dream, measure 5, they have a cut on a single High E and they use a grace note to notate a cut on the E with a G.
Just trying to get my Irish technique right!
- pancelticpiper
- Posts: 5310
- Joined: Mon Jul 10, 2006 7:25 am
- antispam: No
- Please enter the next number in sequence: 8
- Tell us something.: Playing Scottish and Irish music in California for 45 years.
These days many discussions are migrating to Facebook but I prefer the online chat forum format. - Location: WV to the OC
Re: Cutting Question
First, here's a short video I did showing cuts, pats, and rolls
https://www.youtube.com/watch?v=Nfu_fDUyNHs
I'm not quite sure of the exact meaning your question but with cuts (upper gracenotes) it's usually just a single finger doing the cutting.
So cutting E with G
xxx xxo
xxx oxo
xxx xxo
Now, two fingers would be raised, in effect, if going from F# to E with a G cut:
xxx xoo
xxx ooo
xxx xxo
Likewise, going from E to F# with a G cut:
xxx xxo
xxx ooo
xxx xoo
In reality the cutting finger might move a split-second before the note-change finger moves- what you don't want is the note-change finger moving a split-second before the cutting finger does, which will sound sloppy.
About using the G finger to cut E, various players differ on that. When I started playing (1970s) the people I saw play around me tended to use the A finger to cut the entire bottom hand, so cutting E would be
xxx xxo
xxo xxo
xxx xxo
One explanation I heard over the years was that this divided the work in doing rolls between the two hands, which would be the case for rolls on E, F#, and G.
And for sure the same-hand rolls on A and B often give beginners more problems than the two-hand rolls on E, F#, and G.
However, on some whistles and flutes the A cut on E in the 2nd octave is a bit muddy, and the G cut sounds better.
Sticking with your G cut, another example is going from D to E with a G cut:
xxx xxx
xxx oxo
xxx xxo
with an A cut:
xxx xxx
xxo xxo
xxx xxo
https://www.youtube.com/watch?v=Nfu_fDUyNHs
I'm not quite sure of the exact meaning your question but with cuts (upper gracenotes) it's usually just a single finger doing the cutting.
So cutting E with G
xxx xxo
xxx oxo
xxx xxo
Now, two fingers would be raised, in effect, if going from F# to E with a G cut:
xxx xoo
xxx ooo
xxx xxo
Likewise, going from E to F# with a G cut:
xxx xxo
xxx ooo
xxx xoo
In reality the cutting finger might move a split-second before the note-change finger moves- what you don't want is the note-change finger moving a split-second before the cutting finger does, which will sound sloppy.
About using the G finger to cut E, various players differ on that. When I started playing (1970s) the people I saw play around me tended to use the A finger to cut the entire bottom hand, so cutting E would be
xxx xxo
xxo xxo
xxx xxo
One explanation I heard over the years was that this divided the work in doing rolls between the two hands, which would be the case for rolls on E, F#, and G.
And for sure the same-hand rolls on A and B often give beginners more problems than the two-hand rolls on E, F#, and G.
However, on some whistles and flutes the A cut on E in the 2nd octave is a bit muddy, and the G cut sounds better.
Sticking with your G cut, another example is going from D to E with a G cut:
xxx xxx
xxx oxo
xxx xxo
with an A cut:
xxx xxx
xxo xxo
xxx xxo
Richard Cook
c1980 Quinn uilleann pipes
1945 Starck Highland pipes
Goldie Low D whistle
c1980 Quinn uilleann pipes
1945 Starck Highland pipes
Goldie Low D whistle
-
- Posts: 81
- Joined: Wed Feb 14, 2018 8:29 am
- antispam: No
- Please enter the next number in sequence: 8
- Tell us something.: A new tin whistle player, I'm eager to learn more from the collective wisdom of this group. While my playing could use lots of help, I'm especially eager to learn which recordings to listen to.
Re: Cutting Question
I sure do appreciate Richard's detailed explanations on this sort of thing! I find it very helpful to see examples like this with the fingerings.
From the OP:
One factor to consider is the note preceding the note to be cut. In your example, you're probably not going to cut your E with the same finger if the preceding note is a G or higher in the same octave than you would for lower notes.
Assuming the preceding note isn't more than one scale step higher, my cut fingering, as Richard shows, would be:
xxx oxo
But I wouldn't say that I'm playing a G at that point. Instead, that's where my fingers are when I'm starting to play the E, with my lower hand index finger coming down immediately to make the E:
xxx xxo
I guess my point is that I find it confusing to put a note name to the cut itself. It's more straightforward to me to think of the cut as a finger movement that's not associated with a pitch. I.e. an E note is cut by my lower hand's index finger being off its hole at the start of the E, and then instantaneously coming down on its hole. (Except if the preceding note is is a G or above in the same octave as the E.)
Not sure if that's helpful, but it clarifies things for me a bit.
From the OP:
This sort of thing has been confusing for me, too, particularly since not every player cuts with the same fingers, the notation for cuts isn't completely standardized, and terms like "grace note" mean different things to different people.Matthewlawson3 wrote: If you have a Single Note cut, a single High E note, not followed by another High E note, on a D whistle and you cut with a High G, do you do that by the normal way of cutting, meaning with fingers ready to play an E but lifting the G finger to cut or do you play the G and then put fingers down to play the E, like you might in a grace note situation. Does it matter which way you do it? I have been putting fingers down for the E and cutting by lifting the G finger.
One factor to consider is the note preceding the note to be cut. In your example, you're probably not going to cut your E with the same finger if the preceding note is a G or higher in the same octave than you would for lower notes.
Assuming the preceding note isn't more than one scale step higher, my cut fingering, as Richard shows, would be:
xxx oxo
But I wouldn't say that I'm playing a G at that point. Instead, that's where my fingers are when I'm starting to play the E, with my lower hand index finger coming down immediately to make the E:
xxx xxo
I guess my point is that I find it confusing to put a note name to the cut itself. It's more straightforward to me to think of the cut as a finger movement that's not associated with a pitch. I.e. an E note is cut by my lower hand's index finger being off its hole at the start of the E, and then instantaneously coming down on its hole. (Except if the preceding note is is a G or above in the same octave as the E.)
Not sure if that's helpful, but it clarifies things for me a bit.
-
- Posts: 207
- Joined: Sat Aug 22, 2009 9:10 pm
- antispam: No
Re: Cutting Question
Thank you gentlemen for your explanations. I am sorry that I have not been as clear. Let me try it with the XO method.
On a High D whistle, I usually cut an E with the G like
XXX XXO
XXO XXO
XXX XXO
That's what I was taught by the Online Academy of Irish Music. However, I know people use different cuts.
My question involves single note cutting an E note with G. There is a rest preceding the E.
For that, is the way I'm doing it okay or do you actually do a quick G to E like this
XXX OOO
XXX XXO
Hope this makes sense.
On a High D whistle, I usually cut an E with the G like
XXX XXO
XXO XXO
XXX XXO
That's what I was taught by the Online Academy of Irish Music. However, I know people use different cuts.
My question involves single note cutting an E note with G. There is a rest preceding the E.
For that, is the way I'm doing it okay or do you actually do a quick G to E like this
XXX OOO
XXX XXO
Hope this makes sense.
- Mr.Gumby
- Posts: 6614
- Joined: Mon Jun 07, 2010 11:31 am
- antispam: No
- Please enter the next number in sequence: 8
- Location: the Back of Beyond
Re: Cutting Question
I think here terminological confusion sets in: written that would be {A} E you open (and effectively briefly sound) the A in that movement, so you cut with A there.On a High D whistle, I usually cut an E with the G like
XXX XXO
XXO XXO
XXX XXO
Richard already explained cutting with G:
So cutting E with G
xxx xxo
xxx oxo
xxx xxo
My brain hurts
-
- Posts: 81
- Joined: Wed Feb 14, 2018 8:29 am
- antispam: No
- Please enter the next number in sequence: 8
- Tell us something.: A new tin whistle player, I'm eager to learn more from the collective wisdom of this group. While my playing could use lots of help, I'm especially eager to learn which recordings to listen to.
Re: Cutting Question
While your way:
XXX OOO
XXX XXO
works, I think more common, and preferable, would be either:
XXO XXO
XXX XXO
or:
XXX OXO
XXX XXO
the advantage being economy of motion, moving just one finger instead of two. I can't do a comparison at the moment, but I imagine the first technique would make it more difficult for me to get the crisp, nearly instantaneous effect that I usually want in a cut.
XXX OOO
XXX XXO
works, I think more common, and preferable, would be either:
XXO XXO
XXX XXO
or:
XXX OXO
XXX XXO
the advantage being economy of motion, moving just one finger instead of two. I can't do a comparison at the moment, but I imagine the first technique would make it more difficult for me to get the crisp, nearly instantaneous effect that I usually want in a cut.
Last edited by JackJ on Thu Aug 08, 2019 1:52 pm, edited 2 times in total.
- StevieJ
- Posts: 2189
- Joined: Thu May 17, 2001 6:00 pm
- antispam: No
- Please enter the next number in sequence: 8
- Tell us something.: Old hand, active in the early 2000s. Less active in recent years but still lurking from time to time.
- Location: Montreal
Re: Cutting Question
I don't think I would ever do that, even if I were just gracing a single E and sounding the grace note first. I think all my fingers would be in position before lifting a finger to sound the grace.... do you play the G and then put fingers down to play the E, like you might in a grace note situation...
As Mr. G has pointed out, lifting the "G finger" sounds a grace note of A, or would sound an A, albeit a slightly flat A, if it were long enough for you to discern the pitch.
However I have just tried what you describe: playing G and then whacking down the two bottom hand fingers to sound an E. It gives a slightly crisper sound on the whistle I have lying on my desk (a low G). No reason not to do it, if you like the sound, even if nobody else does it (Mind you I don't actually know whether anyone else does or doesn't, only that I don't).
Even crisper if you sound an A and then whack down all the fingers you need for E
(cross-posted with JackJ)
-
- Posts: 207
- Joined: Sat Aug 22, 2009 9:10 pm
- antispam: No
Re: Cutting Question
I think I now understand the confusion. I was unaware that cutting the E on a High D whistle withStevieJ wrote:I don't think I would ever do that, even if I were just gracing a single E and sounding the grace note first. I think all my fingers would be in position before lifting a finger to sound the grace.... do you play the G and then put fingers down to play the E, like you might in a grace note situation...
As Mr. G has pointed out, lifting the "G finger" sounds a grace note of A, or would sound an A, albeit a slightly flat A, if it were long enough for you to discern the pitch.
However I have just tried what you describe: playing G and then whacking down the two bottom hand fingers to sound an E. It gives a slightly crisper sound on the whistle I have lying on my desk (a low G). No reason not to do it, if you like the sound, even if nobody else does it (Mind you I don't actually know whether anyone else does or doesn't, only that I don't).
Even crisper if you sound an A and then whack down all the fingers you need for E
(cross-posted with JackJ)
XXO XXO
sounds an A.
When I say I cut E with G. I mean that I lift the G finger to cut E like this
XXX XXO
XXO XXO
XXX XXO
That is what I do normally. I was taught that way.
Sorry for the confusion.
-
- Posts: 207
- Joined: Sat Aug 22, 2009 9:10 pm
- antispam: No
Re: Cutting Question
Mr.Gumby wrote:I think here terminological confusion sets in: written that would be {A} E you open (and effectively briefly sound) the A in that movement, so you cut with A there.On a High D whistle, I usually cut an E with the G like
XXX XXO
XXO XXO
XXX XXO
Richard already explained cutting with G:
So cutting E with G
xxx xxo
xxx oxo
xxx xxo
I now understand what you are saying. I'm talking about lifting the G finger to cut the E.
XXX XXO
XXO XXO
XXX XXO
I hadn't paid attention to what sounded when the G finger was lifted.
- Mr.Gumby
- Posts: 6614
- Joined: Mon Jun 07, 2010 11:31 am
- antispam: No
- Please enter the next number in sequence: 8
- Location: the Back of Beyond
Re: Cutting Question
When I say I cut E with G. I mean that I lift the G finger to cut E like this
XXX XXO
XXO XXO
XXX XXO
More confusion, but you aren't the first or the last to end up there, don't worry.
I should point out though that I learned my faint grasp of terminology through the pipes and piping tutors, if they mention the name of the finger at all, would call this cutting with the A finger, after the note that is sounded by lifting the finger (See both the Armagh pipers and Seamus Ennis tutors). I am not completely sure how whistlers and fluteplayers would use the terminology but I have always assumed they would be aligned with pipers (and I have never had my wrist slapped before the internet) but I have come to realise on the internet users from outside the tradition have different usage i.e. naming the finger after the note sounded when it is down. So there you have it.
[crossposted]
My brain hurts
-
- Posts: 731
- Joined: Sat Mar 15, 2003 8:06 pm
- antispam: No
- Please enter the next number in sequence: 8
Re: Cutting Question
I think all the responders ahead of me have given you great advice, but just out of curiosity, what tutor and lesson is O'Keefe's Dream. I have the OAIM but it isn't very cooperative when you try to search as specific tune.
-
- Posts: 207
- Joined: Sat Aug 22, 2009 9:10 pm
- antispam: No
Re: Cutting Question
Again, I apologize for the confusion and very much appreciate all the information given. I do come to Tin Whistle from the background of a clarinet player, but I have been played Tin Whistle off and on for the last 10 years.busterbill wrote:I think all the responders ahead of me have given you great advice, but just out of curiosity, what tutor and lesson is O'Keefe's Dream. I have the OAIM but it isn't very cooperative when you try to search as specific tune.
O'Keefe's Dream is found at the OAIM in Tin Whistle Basics, Lesson 14, taught by Kirsten Allstaff.
-
- Posts: 207
- Joined: Sat Aug 22, 2009 9:10 pm
- antispam: No
Re: Cutting Question
If I have the OAIM is there any reason to get a Blayne Chastain lessons subscription as well?
- pancelticpiper
- Posts: 5310
- Joined: Mon Jul 10, 2006 7:25 am
- antispam: No
- Please enter the next number in sequence: 8
- Tell us something.: Playing Scottish and Irish music in California for 45 years.
These days many discussions are migrating to Facebook but I prefer the online chat forum format. - Location: WV to the OC
Re: Cutting Question
One thing that's fogged the discussion here is the different terminology that "legit" woodwind players (Boehm flute/sax/clarinet/etc) tend to use versus what ITM woodwind players (and Highland pipers) tend to use.
On the pipes (uilleann and Highland) people tend to name each hole by the note which emits from it; in "legit" woodwind practice people tend to name each hole by the note which emits from the next-lower hole.
Or put another way, trad players name the hole by the note which occurs when you lift the finger covering that hole, while "legit" practice is to name the hole by the note which occurs when you put down the finger.
To clear all this up, for a trad player:
xxx xxo the "E" finger lifted/ the "E" hole opened
xxo xxx the "A" finger lifted/ the "A" hole opened (as in making an "A" cut on D)
Also handy is the numbering of the holes. On a whistle "Hole 1" is the top hole, from which C# and C emit. "Hole 5" is the hole from which F# emits.
So going down the whistle from the hole closest to the mouthpiece:
OOO OOO Hole 1, C hole, C finger (usually just called "C" though of course C and C# both emit from this hole)
OOO OOO Hole 2, B hole, B finger
OOO OOO Hole 3, A hole, A finger
OOO OOO Hole 4, G hole, G finger
OOO OOO Hole 5, F hole, F finger (yes it's F# but the sharp is usually omitted when referring to this hole)
OOO OOO Hole 6, E hole, E finger
Hopefully this will clear up confusion! (Or maybe, create more!)
On the pipes (uilleann and Highland) people tend to name each hole by the note which emits from it; in "legit" woodwind practice people tend to name each hole by the note which emits from the next-lower hole.
Or put another way, trad players name the hole by the note which occurs when you lift the finger covering that hole, while "legit" practice is to name the hole by the note which occurs when you put down the finger.
To clear all this up, for a trad player:
xxx xxo the "E" finger lifted/ the "E" hole opened
xxo xxx the "A" finger lifted/ the "A" hole opened (as in making an "A" cut on D)
Also handy is the numbering of the holes. On a whistle "Hole 1" is the top hole, from which C# and C emit. "Hole 5" is the hole from which F# emits.
So going down the whistle from the hole closest to the mouthpiece:
OOO OOO Hole 1, C hole, C finger (usually just called "C" though of course C and C# both emit from this hole)
OOO OOO Hole 2, B hole, B finger
OOO OOO Hole 3, A hole, A finger
OOO OOO Hole 4, G hole, G finger
OOO OOO Hole 5, F hole, F finger (yes it's F# but the sharp is usually omitted when referring to this hole)
OOO OOO Hole 6, E hole, E finger
Hopefully this will clear up confusion! (Or maybe, create more!)
Richard Cook
c1980 Quinn uilleann pipes
1945 Starck Highland pipes
Goldie Low D whistle
c1980 Quinn uilleann pipes
1945 Starck Highland pipes
Goldie Low D whistle
-
- Posts: 207
- Joined: Sat Aug 22, 2009 9:10 pm
- antispam: No
Re: Cutting Question
Thank you for this. Coming from a clarinet background, I was unaware of this difference. It would be a foreign concept for any clarinet player if you said that the E key on the clarinet is called the F because on clarinet or other classical instruments players usually learn by what Richard said, that is, "name the hole by the note which occurs when you put down the finger. "pancelticpiper wrote:One thing that's fogged the discussion here is the different terminology that "legit" woodwind players (Boehm flute/sax/clarinet/etc) tend to use versus what ITM woodwind players (and Highland pipers) tend to use.
On the pipes (uilleann and Highland) people tend to name each hole by the note which emits from it; in "legit" woodwind practice people tend to name each hole by the note which emits from the next-lower hole.
Or put another way, trad players name the hole by the note which occurs when you lift the finger covering that hole, while "legit" practice is to name the hole by the note which occurs when you put down the finger.
To clear all this up, for a trad player:
xxx xxo the "E" finger lifted/ the "E" hole opened
xxo xxx the "A" finger lifted/ the "A" hole opened (as in making an "A" cut on D)
Also handy is the numbering of the holes. On a whistle "Hole 1" is the top hole, from which C# and C emit. "Hole 5" is the hole from which F# emits.
So going down the whistle from the hole closest to the mouthpiece:
OOO OOO Hole 1, C hole, C finger (usually just called "C" though of course C and C# both emit from this hole)
OOO OOO Hole 2, B hole, B finger
OOO OOO Hole 3, A hole, A finger
OOO OOO Hole 4, G hole, G finger
OOO OOO Hole 5, F hole, F finger (yes it's F# but the sharp is usually omitted when referring to this hole)
OOO OOO Hole 6, E hole, E finger
Hopefully this will clear up confusion! (Or maybe, create more!)
I play and have played clarinet from 6th grade all the way through the end of college/university and even minored in music and took music theory classes and somehow many things in ITM never came up at all hahaha. I've had to learn many new things, but I find it interesting to think about the different paths each "world" took. Most, if not all, of my teachers and professors I am sure are not aware of many of the things in ITM. Though I do know a composer who may be aware of different Irish articulations such as the cut and strike and rolls.