Upgrading from wood to polymer?
-
- Posts: 6
- Joined: Fri Dec 21, 2018 8:19 am
- antispam: No
- Please enter the next number in sequence: 8
- Tell us something.: I'm looking for great and valuable information about flute makers, as I'm about to purchase a simple system flute and there are too many options and I have a relatively limited budget.
Upgrading from wood to polymer?
I'm not sure if I have to update my flute. It's a Pratten style wooden flute (guayacan, a local hardwood used for flutes here) with tuning slide and no keys made by a local flute maker that also plays ITM, and it sounds quite better than my antique flute made in France.
Thing is I don't know if it's time to upgrade it. My budget goes up to a Casey Burns folk flute, I can't go beyond that USD 400/450 as customs and shipping make the purchase a lot more expensive.
I'm posting a photo, and also a sound clip of my flute http://gervasiobarreiro.com.ar/woodenflute.mp4 (I have a lot to improve, I know). Based on that, do you think I will get a better sound with a Delrin or a Burns Folk flute? I've been reading a lot of reviews of polymer flutes, and my choice is between the M&E and a Copley, but somehow I feel like downgrading going for a polymer.
Thanks!
Thing is I don't know if it's time to upgrade it. My budget goes up to a Casey Burns folk flute, I can't go beyond that USD 400/450 as customs and shipping make the purchase a lot more expensive.
I'm posting a photo, and also a sound clip of my flute http://gervasiobarreiro.com.ar/woodenflute.mp4 (I have a lot to improve, I know). Based on that, do you think I will get a better sound with a Delrin or a Burns Folk flute? I've been reading a lot of reviews of polymer flutes, and my choice is between the M&E and a Copley, but somehow I feel like downgrading going for a polymer.
Thanks!
Last edited by vonmasgaau on Sat Dec 22, 2018 1:34 pm, edited 1 time in total.
-
- Posts: 304
- Joined: Wed Apr 18, 2007 3:57 pm
- antispam: No
- Please enter the next number in sequence: 10
- Location: Albuturkey
Re: Upgrading from wood to polymer?
Hello,
Perhaps you could explain what you are looking for in an "upgrade". Are you looking for a flute that is easier to play, better in tune, has better tone?
You might also consider posting a sound file so that we can hear what your flute sounds like.
If you like your flute, and it sounds good, and you feel like it plays well, maybe it is the flute for you.
Perhaps you could explain what you are looking for in an "upgrade". Are you looking for a flute that is easier to play, better in tune, has better tone?
You might also consider posting a sound file so that we can hear what your flute sounds like.
If you like your flute, and it sounds good, and you feel like it plays well, maybe it is the flute for you.
"Luck is important"
-
- Posts: 1149
- Joined: Mon Aug 14, 2017 5:47 am
- antispam: No
- Please enter the next number in sequence: 8
- Tell us something.: Kickbiker - at over 70!
:lol:
....................................................................
....................................................................
Re: Upgrading from wood to polymer?
I believe most people would consider going to a wooden flute an upgrade, but I personally like my delrin & my ABS flutes because they are easy to care for.
Keith.
Trying to do justice to my various musical instruments.
Trying to do justice to my various musical instruments.
-
- Posts: 6
- Joined: Fri Dec 21, 2018 8:19 am
- antispam: No
- Please enter the next number in sequence: 8
- Tell us something.: I'm looking for great and valuable information about flute makers, as I'm about to purchase a simple system flute and there are too many options and I have a relatively limited budget.
Re: Upgrading from wood to polymer?
Hi Jose! You're right. I've posted an audio clip in the original post. An upgrade for me would be a flute with powerful and barking low tones, and a more responsive flute.Jose' Scotte' Este' wrote: Perhaps you could explain what you are looking for in an "upgrade". Are you looking for a flute that is easier to play, better in tune, has better tone?
You might also consider posting a sound file so that we can hear what your flute sounds like.
-
- Posts: 6
- Joined: Fri Dec 21, 2018 8:19 am
- antispam: No
- Please enter the next number in sequence: 8
- Tell us something.: I'm looking for great and valuable information about flute makers, as I'm about to purchase a simple system flute and there are too many options and I have a relatively limited budget.
Re: Upgrading from wood to polymer?
Yea, I can totally relate to that. Which delrin do you play?fatmac wrote:I believe most people would consider going to a wooden flute an upgrade, but I personally like my delrin & my ABS flutes because they are easy to care for.
- Loren
- Posts: 8390
- Joined: Fri Jun 29, 2001 6:00 pm
- antispam: No
- Please enter the next number in sequence: 8
- Tell us something.: You just slip out the back, Jack
Make a new plan, Stan
You don't need to be coy, Roy
Just get yourself free
Hop on the bus, Gus
You don't need to discuss much
Just drop off the key, Lee
And get yourself free - Location: Loren has left the building.
Re: Upgrading from wood to polymer?
Since most (all?) of us won’t have played a flute like the one you own, it’s impossible to say if another flute would be an upgrade. That said, my suggestion would be to go with a Delrin flute since you already have a wood flute, and the Copley would be my recommendation. You may very well find it to be better than your current flute, certainly it won’t be a step down.
Wood and Delrin/polymer flutes both have their advantages, and it’s nice to have one of each.
Wood and Delrin/polymer flutes both have their advantages, and it’s nice to have one of each.
-
- Posts: 304
- Joined: Wed Apr 18, 2007 3:57 pm
- antispam: No
- Please enter the next number in sequence: 10
- Location: Albuturkey
Re: Upgrading from wood to polymer?
There are alot of great delrin flutes out there. However, I think you might be describing a Pratten model flute, rather than a Rudall and Rose. Many flute makers base their flute designs on the R&R.
I have an Ellis Pratten that is a wooden flute that is infused with resin, so that it has the look and feel of wood, with the ease of maintenance of delrin. My flute is absolutely fantastic, although new it costs a bit more than your target price. It is easy to play, and can be played sweetly, or powerfully, with a nice growl and nice low D...
I have an Ellis Pratten that is a wooden flute that is infused with resin, so that it has the look and feel of wood, with the ease of maintenance of delrin. My flute is absolutely fantastic, although new it costs a bit more than your target price. It is easy to play, and can be played sweetly, or powerfully, with a nice growl and nice low D...
"Luck is important"
- Terry McGee
- Posts: 3335
- Joined: Sun Dec 12, 2004 4:12 pm
- Please enter the next number in sequence: 1
- Location: Malua Bay, on the NSW Nature Coast
- Contact:
Re: Upgrading from wood to polymer?
vonmasgaau, I don't think your current flute is a Pratten-style. Prattens have very large holes, particularly holes 2 and 5, whereas the holes on your flute are small and relatively uniform in size. The embouchure hole also looks a little small. I'd be guessing that it is modeled on an early English flute or a German flute.
What's that at the top of the RH section? Thread supporting a crack? Any leakage there will be a problem for lower notes.
My guess is that you would find a flute modeled on a large-holed Rudall or a Prattens much more responsive.
What's that at the top of the RH section? Thread supporting a crack? Any leakage there will be a problem for lower notes.
My guess is that you would find a flute modeled on a large-holed Rudall or a Prattens much more responsive.
-
- Posts: 304
- Joined: Wed Apr 18, 2007 3:57 pm
- antispam: No
- Please enter the next number in sequence: 10
- Location: Albuturkey
Re: Upgrading from wood to polymer?
Right Terry. I meant that it sounded like he was describing that he wanted a Pratten style flute, although I hadn't thought of a large holed RR ( I am not that knowledgeable!)
"Luck is important"
-
- Posts: 1149
- Joined: Mon Aug 14, 2017 5:47 am
- antispam: No
- Please enter the next number in sequence: 8
- Tell us something.: Kickbiker - at over 70!
:lol:
....................................................................
....................................................................
Re: Upgrading from wood to polymer?
I have a Damian Thompson beginner delrin flute, (with off set holes at my request).vonmasgaau wrote:Yea, I can totally relate to that. Which delrin do you play?fatmac wrote:I believe most people would consider going to a wooden flute an upgrade, but I personally like my delrin & my ABS flutes because they are easy to care for.
Keith.
Trying to do justice to my various musical instruments.
Trying to do justice to my various musical instruments.
-
- Posts: 3076
- Joined: Thu Jul 25, 2002 6:00 pm
- Please enter the next number in sequence: 1
- Location: Sweden
Re: Upgrading from wood to polymer?
I think your flute sounds fine, nothing wrong there. You just need to keep on developing "upgrading" your technique that's all. You're already getting a good sound as it is. so I don't think you have to be in a hurry to get another flute. Why not keep playing this one, save money, and then order a new flute, a Solen Lesouef, Chris Wilkes, Pat Olwell, or buy an original Rudall & Rose
-
- Posts: 1307
- Joined: Sun Mar 25, 2018 5:40 am
- antispam: No
- Please enter the next number in sequence: 8
- Tell us something.: I'm a historian and the author of "The Beat Cop:Chicago's Chief O'Neill and the Creation of Irish Music," published by the University of Chicago in 2022. I live in Arlington VA and play the flute sincerely but not well
Re: Upgrading from wood to polymer?
I do a lot of woodworking, including making instruments. I can certainly see the appeal of a wooden flute. It's an organic material, with lovely natural variations; it's traditional, it changes with age. Working with wood is wonderful.
I'm skeptical that the material makes a big difference in the sound though. In my experience making guitars, the construction method matters much more than the wood type. But I'm certainly no expert on flutes and have never played a good wooden flute, so I remain agnostic.
In one sense, delrin is clearly an upgrade. It's virtually indestructible in ordinary life. Where I live the temperature can range from 100 degrees F (37c) in the summer, with unbelievable crushing humidity, and can be -10c (14F or so) for a couple weeks in winter, with forced air heating turning the inside of houses desert-dry. A wooden flute is often wet on the inside and dry on the outside, and then when not played is subjected to the usual changes with temp. and humidity. Seems like a recipe for disaster around here. A Delrin flute will never absorb a drop of water. In that sense it's clearly an "upgrade. I have a Walt Sweet "Shannon" flute that doesn't feel like wood, but is well and attractively designed and a pleasant object to play. It feels good in the hands.
But music is very "intentional" and the care a wooden flute requires is part of the experience of playing on a wooden flute. Patrick Olwell lives a few hours south and west of here and he seems to have no trouble making wooden flutes in more or less the same climate!
I'm skeptical that the material makes a big difference in the sound though. In my experience making guitars, the construction method matters much more than the wood type. But I'm certainly no expert on flutes and have never played a good wooden flute, so I remain agnostic.
In one sense, delrin is clearly an upgrade. It's virtually indestructible in ordinary life. Where I live the temperature can range from 100 degrees F (37c) in the summer, with unbelievable crushing humidity, and can be -10c (14F or so) for a couple weeks in winter, with forced air heating turning the inside of houses desert-dry. A wooden flute is often wet on the inside and dry on the outside, and then when not played is subjected to the usual changes with temp. and humidity. Seems like a recipe for disaster around here. A Delrin flute will never absorb a drop of water. In that sense it's clearly an "upgrade. I have a Walt Sweet "Shannon" flute that doesn't feel like wood, but is well and attractively designed and a pleasant object to play. It feels good in the hands.
But music is very "intentional" and the care a wooden flute requires is part of the experience of playing on a wooden flute. Patrick Olwell lives a few hours south and west of here and he seems to have no trouble making wooden flutes in more or less the same climate!
-
- Posts: 6
- Joined: Fri Dec 21, 2018 8:19 am
- antispam: No
- Please enter the next number in sequence: 8
- Tell us something.: I'm looking for great and valuable information about flute makers, as I'm about to purchase a simple system flute and there are too many options and I have a relatively limited budget.
Re: Upgrading from wood to polymer?
Thank you Steampacket! Yea, I agree. I totally need to "upgrade" my technique!Steampacket wrote: You just need to keep on developing "upgrading" your technique that's all. You're already getting a good sound as it is. so I don't think you have to be in a hurry to get another flute. Why not keep playing this one, save money, and then order a new flute, a Solen Lesouef, Chris Wilkes, Pat Olwell, or buy an original Rudall & Rose
Here's a new clip with a better microphone: http://gervasiobarreiro.com.ar/tune.mp3
Your suggestion about saving money for an actual upgrade sounds spot on.
-
- Posts: 6
- Joined: Fri Dec 21, 2018 8:19 am
- antispam: No
- Please enter the next number in sequence: 8
- Tell us something.: I'm looking for great and valuable information about flute makers, as I'm about to purchase a simple system flute and there are too many options and I have a relatively limited budget.
Re: Upgrading from wood to polymer?
Yes Terry, it's thread supporting a small crack. The maker is out of the city, so I have to wait for the repair. Here's what it sounds with my bad technique and the leakage: http://gervasiobarreiro.com.ar/tune.mp3. The bottom sounds a bit weak but I can't be sure if that due to the leak or the flute, or bad technique or all at once.Terry McGee wrote: What's that at the top of the RH section? Thread supporting a crack? Any leakage there will be a problem for lower notes.
- Loren
- Posts: 8390
- Joined: Fri Jun 29, 2001 6:00 pm
- antispam: No
- Please enter the next number in sequence: 8
- Tell us something.: You just slip out the back, Jack
Make a new plan, Stan
You don't need to be coy, Roy
Just get yourself free
Hop on the bus, Gus
You don't need to discuss much
Just drop off the key, Lee
And get yourself free - Location: Loren has left the building.
Re: Upgrading from wood to polymer?
I thought about mentioning this in my previous post but decided against it, because it’s not the sort of thing people like to hear, however I think you should know so here it is:
Considering the wood your flute is made of, you can expect more cracks, so you might factor this into your decision. Personally, I’d buy a Delrin flute and sell the one you have, before the value of your current flute drops significantly further.
Considering the wood your flute is made of, you can expect more cracks, so you might factor this into your decision. Personally, I’d buy a Delrin flute and sell the one you have, before the value of your current flute drops significantly further.