Converting a recorder into a chalumeau
- AuLoS303
- Posts: 464
- Joined: Sun Apr 30, 2017 12:17 pm
- antispam: No
- Please enter the next number in sequence: 8
- Tell us something.: I have a fascination for musical instruments of all kinds, and though I'm not a very good player I have a small collection of acoustic instruments including 5 recorders, 3 tin whistles , 3 guitars and 2 ukuleles.
- Location: Darlington UK
- Contact:
Converting a recorder into a chalumeau
An idea of mine. I have a spare clarinet mouthpiece, and a couple of recorders. I was wondering how hard it is to fit said mouthpiece onto a recorder (soprano or alto)
You can play beautiful music on an ugly flute
My musical endeavours on my blog
My musical endeavours on my blog
- Peter Duggan
- Posts: 3223
- Joined: Tue Aug 30, 2011 5:39 pm
- antispam: No
- Please enter the next number in sequence: 8
- Tell us something.: I'm not registering, I'm trying to edit my profile! The field “Tell us something.” is too short, a minimum of 100 characters is required.
- Location: Kinlochleven
- Contact:
Re: Converting a recorder into a chalumeau
Sure you could butcher something to fit, but probably pointless when the recorder bore, hole spacings etc. won't work right with it.
- Nanohedron
- Moderatorer
- Posts: 38224
- Joined: Wed Dec 18, 2002 6:00 pm
- antispam: No
- Please enter the next number in sequence: 8
- Tell us something.: Been a fluter, citternist, and uilleann piper; committed now to the way of the harp.
Oh, yeah: also a mod here, not a spammer. A matter of opinion, perhaps. - Location: Lefse country
Re: Converting a recorder into a chalumeau
I think you should find out for yourself and then report back to us.AuLoS303 wrote:An idea of mine. I have a spare clarinet mouthpiece, and a couple of recorders. I was wondering how hard it is to fit said mouthpiece onto a recorder (soprano or alto)
On a technical note: If all else fails, there's always duct tape.
"If you take music out of this world, you will have nothing but a ball of fire." - Balochi musician
- Peter Duggan
- Posts: 3223
- Joined: Tue Aug 30, 2011 5:39 pm
- antispam: No
- Please enter the next number in sequence: 8
- Tell us something.: I'm not registering, I'm trying to edit my profile! The field “Tell us something.” is too short, a minimum of 100 characters is required.
- Location: Kinlochleven
- Contact:
Re: Converting a recorder into a chalumeau
The Reed Trombone, mixing brass and woodwind mouthpieces
The Tromboon! Bassoon and Trombone mashup
Plenty of tape in use here, but take heed of Trent Hamilton when he says at the end of the first of these videos:
'So I guess after all these experiments the conclusion that we must draw is that, when you're playing one of these instruments, whether it be a baritone or a trombone or a sax or a clarinet or whatever, the mouthpiece that you should best use just so happens to be the one that they've been using all along.'
The Tromboon! Bassoon and Trombone mashup
Plenty of tape in use here, but take heed of Trent Hamilton when he says at the end of the first of these videos:
'So I guess after all these experiments the conclusion that we must draw is that, when you're playing one of these instruments, whether it be a baritone or a trombone or a sax or a clarinet or whatever, the mouthpiece that you should best use just so happens to be the one that they've been using all along.'
- AuLoS303
- Posts: 464
- Joined: Sun Apr 30, 2017 12:17 pm
- antispam: No
- Please enter the next number in sequence: 8
- Tell us something.: I have a fascination for musical instruments of all kinds, and though I'm not a very good player I have a small collection of acoustic instruments including 5 recorders, 3 tin whistles , 3 guitars and 2 ukuleles.
- Location: Darlington UK
- Contact:
Re: Converting a recorder into a chalumeau
Those were quite interesting. However a chalumeau does use a clarinet mouthpiece. And is sold as such I believe.
You can play beautiful music on an ugly flute
My musical endeavours on my blog
My musical endeavours on my blog
- AuLoS303
- Posts: 464
- Joined: Sun Apr 30, 2017 12:17 pm
- antispam: No
- Please enter the next number in sequence: 8
- Tell us something.: I have a fascination for musical instruments of all kinds, and though I'm not a very good player I have a small collection of acoustic instruments including 5 recorders, 3 tin whistles , 3 guitars and 2 ukuleles.
- Location: Darlington UK
- Contact:
Re: Converting a recorder into a chalumeau
You can play beautiful music on an ugly flute
My musical endeavours on my blog
My musical endeavours on my blog
- Nanohedron
- Moderatorer
- Posts: 38224
- Joined: Wed Dec 18, 2002 6:00 pm
- antispam: No
- Please enter the next number in sequence: 8
- Tell us something.: Been a fluter, citternist, and uilleann piper; committed now to the way of the harp.
Oh, yeah: also a mod here, not a spammer. A matter of opinion, perhaps. - Location: Lefse country
Re: Converting a recorder into a chalumeau
And a recorder body is not a chalumeau body, which is constructed to accommodate and profit from a clarinet mouthpiece in every way. Likewise, a recorder body is built to suit its own proper mouthpiece. An instrument is built as a whole unit, from tip to tail. A big mistake is to look at a woodwind and say, "It's just a tube with holes; can't be that big of a deal." That's why I think you should try it yourself instead of asking us, because it's already evident you're not interested in lending our input any weight anyway. So go ahead, and just do it yourself and see. Direct experience will serve you well enough.AuLoS303 wrote:Those were quite interesting. However a chalumeau does use a clarinet mouthpiece. And is sold as such I believe.
Most instrument components are not functionally interchangeable except to get an unsatisfying oddity at best. But don't take our word for it; I say do it, and discover it for yourself. Then come back to us with your findings.
"If you take music out of this world, you will have nothing but a ball of fire." - Balochi musician
- Peter Duggan
- Posts: 3223
- Joined: Tue Aug 30, 2011 5:39 pm
- antispam: No
- Please enter the next number in sequence: 8
- Tell us something.: I'm not registering, I'm trying to edit my profile! The field “Tell us something.” is too short, a minimum of 100 characters is required.
- Location: Kinlochleven
- Contact:
Re: Converting a recorder into a chalumeau
I knew you'd say that. But see also what I said in my first reply and what Nanohedron's just reiterated!AuLoS303 wrote:However a chalumeau does use a clarinet mouthpiece.
The chalumeau has a cylindrical (or nearly cylindrical) bore. The baroque recorder has a complex conical (reverse-tapered) bore which I'm guessing also to be narrower at the bell end at least. They're chalk and cheese.
-
- Posts: 612
- Joined: Thu Nov 09, 2006 12:44 pm
- antispam: No
- Please enter the next number in sequence: 8
- Location: Washington State
Re: Converting a recorder into a chalumeau
https://www.sansluthier.net/es/viento-c ... clariphone. 2 1/2 octave range...probably the best you'll see in a pocket clarinet. Just a few extra holes to keep track of.
- AuLoS303
- Posts: 464
- Joined: Sun Apr 30, 2017 12:17 pm
- antispam: No
- Please enter the next number in sequence: 8
- Tell us something.: I have a fascination for musical instruments of all kinds, and though I'm not a very good player I have a small collection of acoustic instruments including 5 recorders, 3 tin whistles , 3 guitars and 2 ukuleles.
- Location: Darlington UK
- Contact:
Re: Converting a recorder into a chalumeau
Hmm the bore, of course! Whereas a recorder has a reverse conical bore, giving it its unique tone.Peter Duggan wrote:I knew you'd say that. But see also what I said in my first reply and what Nanohedron's just reiterated!AuLoS303 wrote:However a chalumeau does use a clarinet mouthpiece.
The chalumeau has a cylindrical (or nearly cylindrical) bore. The baroque recorder has a complex conical (reverse-tapered) bore which I'm guessing also to be narrower at the bell end at least. They're chalk and cheese.
You can play beautiful music on an ugly flute
My musical endeavours on my blog
My musical endeavours on my blog
- AuLoS303
- Posts: 464
- Joined: Sun Apr 30, 2017 12:17 pm
- antispam: No
- Please enter the next number in sequence: 8
- Tell us something.: I have a fascination for musical instruments of all kinds, and though I'm not a very good player I have a small collection of acoustic instruments including 5 recorders, 3 tin whistles , 3 guitars and 2 ukuleles.
- Location: Darlington UK
- Contact:
Re: Converting a recorder into a chalumeau
I have confirmation, it doesn't work. Tho bear in mind I am using a clarinet barrel so that the mouthpiece will mate to the recorder (Yamaha Alto), and with a chalumeau the mouthpiece is sunk into the body, so there is some distance between the mouthpiece and body here.
https://www.instagram.com/p/Bfq8l0TFfc5/
https://www.instagram.com/p/Bfq8l0TFfc5/
You can play beautiful music on an ugly flute
My musical endeavours on my blog
My musical endeavours on my blog
- benhall.1
- Moderator
- Posts: 14806
- Joined: Wed Jan 14, 2009 5:21 pm
- antispam: No
- Please enter the next number in sequence: 8
- Tell us something.: I'm a fiddler and, latterly, a fluter. I love the flute. I wish I'd always played it. I love the whistle as well. I'm blessed in having really lovely instruments for all of my musical interests.
- Location: Unimportant island off the great mainland of Europe
Re: Converting a recorder into a chalumeau
I'm not an instrument maker ... but it seems to me that there must be a lot more going on to give a recorder "its unique tone" than just having a conical bore. Otherwise, how come conical bore whistles don't sound like recorders?AuLoS303 wrote:Hmm the bore, of course! Whereas a recorder has a reverse conical bore, giving it its unique tone.Peter Duggan wrote:I knew you'd say that. But see also what I said in my first reply and what Nanohedron's just reiterated!AuLoS303 wrote:However a chalumeau does use a clarinet mouthpiece.
The chalumeau has a cylindrical (or nearly cylindrical) bore. The baroque recorder has a complex conical (reverse-tapered) bore which I'm guessing also to be narrower at the bell end at least. They're chalk and cheese.
- Nanohedron
- Moderatorer
- Posts: 38224
- Joined: Wed Dec 18, 2002 6:00 pm
- antispam: No
- Please enter the next number in sequence: 8
- Tell us something.: Been a fluter, citternist, and uilleann piper; committed now to the way of the harp.
Oh, yeah: also a mod here, not a spammer. A matter of opinion, perhaps. - Location: Lefse country
Re: Converting a recorder into a chalumeau
Something to do with intonation in the 2nd 8ve, IIRC from past discussions. In the case of our typical wooden flutes, a reverse conical bore also makes for a shorter operating length; without it we wouldn't be able to meet, at least comfortably if at all, the hand stretch needed on cylindrical bore simple-system D flutes.benhall.1 wrote:...it seems to me that there must be a lot more going on to give a recorder "its unique tone" than just having a conical bore. Otherwise, how come conical bore whistles don't sound like recorders?
"If you take music out of this world, you will have nothing but a ball of fire." - Balochi musician
-
- Posts: 1419
- Joined: Sun Dec 05, 2010 2:59 pm
- antispam: No
- Please enter the next number in sequence: 10
- Location: Southwestern Ontario
Re: Converting a recorder into a chalumeau
As I understand it, almost entirely due to profiling at the mouthpiece: the windway, window, fipple, splitting edge, ... A recorder with a cylindrical bore would still sound mostly like a recorder.benhall.1 wrote:it seems to me that there must be a lot more going on to give a recorder "its unique tone" than just having a conical bore. Otherwise, how come conical bore whistles don't sound like recorders?
The first problem with sticking a reed head on a recorder body would be intonation: none of the notes would be in tune, with each other or anything else. Even the second register would be out of tune with the corresponding notes in the first register.
- Peter Duggan
- Posts: 3223
- Joined: Tue Aug 30, 2011 5:39 pm
- antispam: No
- Please enter the next number in sequence: 8
- Tell us something.: I'm not registering, I'm trying to edit my profile! The field “Tell us something.” is too short, a minimum of 100 characters is required.
- Location: Kinlochleven
- Contact:
Re: Converting a recorder into a chalumeau
While it wasn't going to work anyway, I can tell you (having just watched your video) that there's no real distance between mouthpiece and body here when the combined length of your clarinet mouthpiece and barrel could still be shorter than the sounding length of your recorder with its normal head. But don't expect matching these to make it better because they still don't belong together!AuLoS303 wrote:Tho bear in mind I am using a clarinet barrel so that the mouthpiece will mate to the recorder (Yamaha Alto), and with a chalumeau the mouthpiece is sunk into the body, so there is some distance between the mouthpiece and body here.