End Cap Inlays
- Casey Burns
- Posts: 1488
- Joined: Sun Nov 16, 2003 12:27 pm
- Please enter the next number in sequence: 1
- Location: Kingston WA
- Contact:
End Cap Inlays
I have been busy engraving this last month, prototyping disks which I will be inlaying into the end caps of my flutes with rings and slides. Here is some of my work thus so far.
Casey
Casey
Re: End Cap Inlays
Lovely. I think the designs of end caps are often real artwork.
- Nanohedron
- Moderatorer
- Posts: 38226
- Joined: Wed Dec 18, 2002 6:00 pm
- antispam: No
- Please enter the next number in sequence: 8
- Tell us something.: Been a fluter, citternist, and uilleann piper; committed now to the way of the harp.
Oh, yeah: also a mod here, not a spammer. A matter of opinion, perhaps. - Location: Lefse country
Re: End Cap Inlays
Some pretty elegant-looking stuff, there. Not that they don't stand on their own, Casey, but do you think you'd ever get around to overlaying end-cap guilloche work with transparent colored enamels?
"If you take music out of this world, you will have nothing but a ball of fire." - Balochi musician
-
- Posts: 383
- Joined: Sat Aug 30, 2003 4:30 pm
- antispam: No
- Please enter the next number in sequence: 8
Re: End Cap Inlays
I always knew Spirographs were good for something.
Casey, this is off topic, but I have to compliment you on the flute you made for a young lady. She is missing a finger, and the flute you made allows her to play. She really likes it. Thank you.
Casey, this is off topic, but I have to compliment you on the flute you made for a young lady. She is missing a finger, and the flute you made allows her to play. She really likes it. Thank you.
Last edited by hpinson on Wed Dec 13, 2017 6:17 pm, edited 2 times in total.
- Peter Duggan
- Posts: 3223
- Joined: Tue Aug 30, 2011 5:39 pm
- antispam: No
- Please enter the next number in sequence: 8
- Tell us something.: I'm not registering, I'm trying to edit my profile! The field “Tell us something.” is too short, a minimum of 100 characters is required.
- Location: Kinlochleven
- Contact:
Re: End Cap Inlays
I'd love to know more if she's OK with discussing it? And have, as many here know, a genuine interest in adapted instruments.hpinson wrote:She is missing a finger, and the flute you made allows her to play.
- Casey Burns
- Posts: 1488
- Joined: Sun Nov 16, 2003 12:27 pm
- Please enter the next number in sequence: 1
- Location: Kingston WA
- Contact:
Re: End Cap Inlays
Enameling is planned.
-
- Posts: 383
- Joined: Sat Aug 30, 2003 4:30 pm
- antispam: No
- Please enter the next number in sequence: 8
Re: End Cap Inlays
Peter I think it would best be discussed in the abstract - if Casey would be willing.
- Casey Burns
- Posts: 1488
- Joined: Sun Nov 16, 2003 12:27 pm
- Please enter the next number in sequence: 1
- Location: Kingston WA
- Contact:
Re: End Cap Inlays
I am but just briefly - I'm busy trying to get the last of the year's orders out - some 20 flutes. For my small handed flutes especially with clients with specific hand issues, I have them send tracings of their hands. I also have them get a piece of 1" dowel or the equivalent and have them draw on imaginary hole positions for the 1st and 4th holes, and then have someone trace where the 2nd and 3rd fingers for each hand like to land. My flute design allows the flexibility to move the holes around someone, keeping #1 and 4 as the constants although those get moved down if a particularly narrow hand position is needed. Then the flute is cut to these parameters and evaluated by the client. If holes need to be moved here and there its no big deal but having done this for years, usually my 1st attempt is pretty spot on. Its the same principal as when I planned the key work for Matt Molloy's Bb flute - except that I had the pleasurable experience of spending much of a day with him to do this which included a wonderful lunch down at Pike Place. What was most pleasurable was hearing him play that Bb in concert later that evening and in subsequent Chieftain concerts.
Casey
Casey
-
- Posts: 453
- Joined: Thu Nov 30, 2017 8:19 pm
- antispam: No
- Please enter the next number in sequence: 8
- Tell us something.: I can only hope that my proficiency with the whistle is steadily improving. A few of my whistles get a workout on an almost daily basis. And I'm almost certainly afflicted with WhOAD.
- Location: Detroit Metro
Re: End Cap Inlays
Very nice work there. I especially like the one at bottom right, which reminds me of engine-turning.
Re: End Cap Inlays
Very cool that you are making flutes that enable people with whatever difficulty to play.
Well done, indeed.
Well done, indeed.
-
- Posts: 411
- Joined: Wed Aug 23, 2017 6:49 pm
- antispam: No
- Please enter the next number in sequence: 8
- Tell us something.: I started with playing bamboo flutes. But I transitioned to primarily playing the Boehm flute a few lessons ago with the aim of getting good music instruction. However, I've been transitioning to playing Irish Traditional Music on simple flutes.
- Location: Ohio
Re: End Cap Inlays
Casey, please keep us updated on the cap inlays. I am interested to see how some of them turn out on the flutes.
- Steve Bliven
- Posts: 2978
- Joined: Sat Jan 31, 2004 2:06 pm
- antispam: No
- Location: Dartmouth, Massachusetts, USA
Re: End Cap Inlays
See viewtopic.php?f=2&t=104380 for Casey's earlier intro to this topic.Dan A. wrote:Very nice work there. I especially like the one at bottom right, which reminds me of engine-turning.
Best wishes.
Steve
Live your life so that, if it was a book, Florida would ban it.
-
- Posts: 1735
- Joined: Mon Aug 13, 2007 2:04 am
- Please enter the next number in sequence: 1
- Location: Mercia
Re: End Cap Inlays
Have you been working towards this ever since you chose crinoid emblem Casey?
-
- Posts: 453
- Joined: Thu Nov 30, 2017 8:19 pm
- antispam: No
- Please enter the next number in sequence: 8
- Tell us something.: I can only hope that my proficiency with the whistle is steadily improving. A few of my whistles get a workout on an almost daily basis. And I'm almost certainly afflicted with WhOAD.
- Location: Detroit Metro
Re: End Cap Inlays
I had a quick glance earlier today. Again, engine-turning looks great...reminds me of the dashboard of certain 1930s cars.Steve Bliven wrote:See viewtopic.php?f=2&t=104380 for Casey's earlier intro to this topic.Dan A. wrote:Very nice work there. I especially like the one at bottom right, which reminds me of engine-turning.