3-D Printing From Connecticut
Forum rules
Please see forum announcement for description and rules!
Please see forum announcement for description and rules!
- ytliek
- Posts: 2739
- Joined: Mon Feb 06, 2012 3:51 pm
- antispam: No
- Please enter the next number in sequence: 10
- Location: Seashore
3-D Printing From Connecticut
I have no experience with the 3-D printing methods being developed, and after a quick search I didn't see anything UConn related so here it is:
http://bigstory.ap.org/article/uconn-ma ... ment-parts
I need bionic lungs and hands to play them 3-D printed whistles. Awh, just make the whole body and include AI.
Proud to be from Connecticut, I'm just not a Husky.
http://bigstory.ap.org/article/uconn-ma ... ment-parts
I need bionic lungs and hands to play them 3-D printed whistles. Awh, just make the whole body and include AI.
Proud to be from Connecticut, I'm just not a Husky.
- Feadoggie
- Posts: 3940
- Joined: Mon Feb 14, 2005 11:06 pm
- antispam: No
- Location: Stout's Valley, PA, USA
Re: 3-D Printing From Connecticut
I am not a Husky either(although we have raised two Siberians). Our daughter-in-law is a Husky, a UCONN graduate. She is familiar with my instrument making efforts. And she also knows about our forays into 3D printing and other technologies. Her husband, our eldest son, is an enabler in these efforts. So she passed along a copy of the UCONN Alumni magazine to me with an article about the same UCONN scientist's methods that use 3D printing and other technologies to restore antique instruments. Good stuff. Lots to think about. Beyond our budget, well beyond.
http://today.uconn.edu/blog/2014/11/the ... struments/
Feadoggie
http://today.uconn.edu/blog/2014/11/the ... struments/
Feadoggie
I've proven who I am so many times, the magnetic strips worn thin.
- Peter Duggan
- Posts: 3223
- Joined: Tue Aug 30, 2011 5:39 pm
- antispam: No
- Please enter the next number in sequence: 8
- Tell us something.: I'm not registering, I'm trying to edit my profile! The field “Tell us something.” is too short, a minimum of 100 characters is required.
- Location: Kinlochleven
- Contact:
Re: 3-D Printing From Connecticut
Really interesting, thanks!Feadoggie wrote:http://today.uconn.edu/blog/2014/11/the ... struments/
- ytliek
- Posts: 2739
- Joined: Mon Feb 06, 2012 3:51 pm
- antispam: No
- Please enter the next number in sequence: 10
- Location: Seashore
Re: 3-D Printing From Connecticut
Yes, thank you Feadoggie, nice read.
And where ever the emerging technologies may go, lots to think about. From awhile ago an interest in imagery and applications:
http://en.wikipedia.org/wiki/Visible_Human_Project
And where ever the emerging technologies may go, lots to think about. From awhile ago an interest in imagery and applications:
http://en.wikipedia.org/wiki/Visible_Human_Project
- Feadoggie
- Posts: 3940
- Joined: Mon Feb 14, 2005 11:06 pm
- antispam: No
- Location: Stout's Valley, PA, USA
Re: 3-D Printing From Connecticut
Yes, this is interesting stuff.
Peter, I am not sure how you view this but I would welcome hearing your thoughts. I know a set of bore gauges are no match for computer aided tomography. What would the likes of Fred Morgan have done with this stuff?
Ytliek, thanks for the link. The use of imaging technologies and computer aided generation in medical applications is even broader still in its potential contributions to society. Thanks for bringing up the topic.
What's that phrase? "The future starts now."
Feadoggie
Peter, I am not sure how you view this but I would welcome hearing your thoughts. I know a set of bore gauges are no match for computer aided tomography. What would the likes of Fred Morgan have done with this stuff?
Ytliek, thanks for the link. The use of imaging technologies and computer aided generation in medical applications is even broader still in its potential contributions to society. Thanks for bringing up the topic.
What's that phrase? "The future starts now."
Feadoggie
I've proven who I am so many times, the magnetic strips worn thin.
- Daniel_Bingamon
- Posts: 2227
- Joined: Wed Jun 27, 2001 6:00 pm
- antispam: No
- Location: Kings Mills, OH
- Contact:
Re: 3-D Printing From Connecticut
Getting closer to getting the printer running:
Provided that the photo shows up properly:
This is a made from scratch 3D printer that uses the Reprap, Mendel Prusa I3 Rework design. Components were purchased a piece at a time from Ebay and various other parts suppliers. Considering that I work on machines that measure jet engine parts in my day job, I've found these to be quite simple.
Being made piecemeal, I did have to watch out for compatibility of parts, some of which I couldn't use (one of the extruder components). I was able to make specific quality and production important decisions like using the J-head which is less likely to clog. I do plan on printing some replacement parts in ABS instead of PLA when I get it running. And, most excitedly, I have heard that 3D printer filament is available now in Delrin/Acetal which is very good for tin whistles.
Provided that the photo shows up properly:
This is a made from scratch 3D printer that uses the Reprap, Mendel Prusa I3 Rework design. Components were purchased a piece at a time from Ebay and various other parts suppliers. Considering that I work on machines that measure jet engine parts in my day job, I've found these to be quite simple.
Being made piecemeal, I did have to watch out for compatibility of parts, some of which I couldn't use (one of the extruder components). I was able to make specific quality and production important decisions like using the J-head which is less likely to clog. I do plan on printing some replacement parts in ABS instead of PLA when I get it running. And, most excitedly, I have heard that 3D printer filament is available now in Delrin/Acetal which is very good for tin whistles.
- waltsweet
- Posts: 184
- Joined: Thu Apr 24, 2003 4:01 pm
- antispam: No
- Please enter the next number in sequence: 8
- Location: Enfield, CT
- Contact:
Re: 3-D Printing From Connecticut
Dear ytliek,
I know that article. I don't believe the people mentioned undertook any commercial application of the technology.
On the other hand, I understand that Jerry Freeman in Coventry, CT is tooling-up to make penywhistle heads this way. For a pennywhistle especially, resolution is critical and that means a time-consuming process. I guess that I, along with everyone else, will find out when speed meets quality and price. He's undertaking a big job. I donated to the project and I wish him well.
Also, my friend is from CT but lives out west. He's using 3D printing to make instrument bodies. They're good. He's more interested in playing than making, as far as I know.
Walt Sweet
wdsweetflutes.com
I know that article. I don't believe the people mentioned undertook any commercial application of the technology.
On the other hand, I understand that Jerry Freeman in Coventry, CT is tooling-up to make penywhistle heads this way. For a pennywhistle especially, resolution is critical and that means a time-consuming process. I guess that I, along with everyone else, will find out when speed meets quality and price. He's undertaking a big job. I donated to the project and I wish him well.
Also, my friend is from CT but lives out west. He's using 3D printing to make instrument bodies. They're good. He's more interested in playing than making, as far as I know.
Walt Sweet
wdsweetflutes.com
- ytliek
- Posts: 2739
- Joined: Mon Feb 06, 2012 3:51 pm
- antispam: No
- Please enter the next number in sequence: 10
- Location: Seashore
Re: 3-D Printing From Connecticut
I'll be curious to see what becomes of all this 3D printing. And beyond the music world application the medical body parts is intriguing as I may need a few replacements.
-
- Posts: 2
- Joined: Mon Oct 24, 2016 5:23 pm
- antispam: No
- Please enter the next number in sequence: 8
- Tell us something.: I'm a virtual student of Guido Gonzato, and I have created an abomination that you can see at: http://www.thingiverse.com/thing:1807378 I would like to ask the Chiff & Fipple community what their experience is, if any, with non-linear/compact whistles.
Re: 3-D Printing From Connecticut
I've been playing with 3D printing whistles a bit: http://www.thingiverse.com/thing:1807378
I'm wondering what the history (if any) of compact "folded pocket whistles" is?
They have a little different sound, some more 3rd harmonics I think, but still playable like a recorder or tin whistle if you tweak them around a bit.
I'm wondering what the history (if any) of compact "folded pocket whistles" is?
They have a little different sound, some more 3rd harmonics I think, but still playable like a recorder or tin whistle if you tweak them around a bit.
- Peter Duggan
- Posts: 3223
- Joined: Tue Aug 30, 2011 5:39 pm
- antispam: No
- Please enter the next number in sequence: 8
- Tell us something.: I'm not registering, I'm trying to edit my profile! The field “Tell us something.” is too short, a minimum of 100 characters is required.
- Location: Kinlochleven
- Contact:
Re: 3-D Printing From Connecticut
But that green one's got 3, 2 and 1 left-hand holes for fingers 1, 2 and 3... not user-friendly?
-
- Posts: 2
- Joined: Mon Oct 24, 2016 5:23 pm
- antispam: No
- Please enter the next number in sequence: 8
- Tell us something.: I'm a virtual student of Guido Gonzato, and I have created an abomination that you can see at: http://www.thingiverse.com/thing:1807378 I would like to ask the Chiff & Fipple community what their experience is, if any, with non-linear/compact whistles.
Re: 3-D Printing From Connecticut
Yeah, that was just an experiment to see how a 6 hole design in the folded pipe might or might not work out... the first pipe had to get quite a bit longer in order to get the "top" 3 holes all into the 2nd pipe, which I don't like much... then those holes are in reverse order, so you'd need to be pretty "specially wired" to move back and forth between this fingering and a traditional whistle - but, tabor players are supposed to be drummers too, so.....Peter Duggan wrote:But that green one's got 3, 2 and 1 left-hand holes for fingers 1, 2 and 3... not user-friendly?
I finally got a couple of pipes that I'm happy with the response of, not sure if it's a coincidence that they're both Cs, an Alto and a Soprano, the Alto stays in 1st octave "recorder sound" pretty easily, and the Soprano will hold overblown 2nd octave notes easily, though it is a little tricky to keep in 1st octave on the bottom (C) note. For both, I found the biggest factor in making an easy to play pipe was making finger holes that sealed easily - leaky/rough holes really do make the pipe hard to play.