It is currently Wed Jul 08, 2020 2:57 am

All times are UTC - 6 hours




Post new topic Reply to topic  [ 4 posts ] 
Author Message
 
 Post subject: Bag and Bellows problems
PostPosted: Mon Jun 08, 2020 7:31 am 
Offline

Joined: Mon Mar 16, 2020 1:34 pm
Posts: 19
So I picked up the Peter Hunter half set off of ebay and just received it. All the pieces are there and it is playing-ish. All the joints needed rehemping (still working on getting the main stock air tight - the metal ferrule between the cup and mainstock seems to have been glued or something in the past, but it is loose right now) but it makes noise!

The biggest issue are the bag and bellows. The bag is a little leaky, but man the bellows are basically non-functional. If there is any back pressure (if you are playing a note or squeezing the bag at all) then all the air goes straight out the bellows along where the leather is stitched into the wood.

I'm new to the UP so I basically have stuck to the things I know from GHB (hemping joints) and haven't gone beyond that at this point. I have a practice set on order so I'm waiting for that to come in before I play - with the way the bellows and bag are I don't want to ingrain any bad habits.

In the meantime I thought it might be worth trying to rebuild the bellows. It seems to be only leaking at the seams so I should be able to pull the wood inlay to get to the stitching groove, remove the stitching and re-do it (I have a bit of experience leatherworking/saddle stitching). But I'm not sure what all needs to be done to make that connection air-tight.

I know I can pick up a Kelleher bag and/or bellows but...why not take a stab at getting this going? I may also recruit my wife to take a stab at making a bag from upholstery/marine vinyl.


Top
 Profile  
Reply with quote  
 
PostPosted: Mon Jun 08, 2020 12:26 pm 
Offline
User avatar

Joined: Thu Dec 20, 2018 9:00 am
Posts: 180
Location: US West Coast
It's probably good to create a seal between the leather and the wood with a thin layer of adhesive or caulk (making sure to use a type that won't damage the materials), in addition to the stitching.


Top
 Profile  
Reply with quote  
 
PostPosted: Thu Jun 11, 2020 5:11 am 
Offline

Joined: Tue Nov 18, 2008 9:37 am
Posts: 192
Get some pipe bag seasoning before you do anything serious. You might find it gives you an airtight bellows. Also, replace the valves the set, that should make a big difference too.


Top
 Profile  
Reply with quote  
 
PostPosted: Thu Jun 11, 2020 11:41 am 
Offline
User avatar

Joined: Wed Sep 05, 2007 2:53 am
Posts: 598
Location: Burgdorf near Hanover, germany
D. M. Quinn provides some very detailed information with plenty of photos about the re-leathering of an old bellows in the facebook group "bagpipe makers exchange".
You have to scroll down until you reach May 29th, 2019, that's where it starts - it will probably take you quite a while to get there but it's worth it :wink:
Be sure you also read the comments, there's some valuable information hidden there.


Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 4 posts ] 

All times are UTC - 6 hours


Who is online

Users browsing this forum: No registered users and 6 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group
[ Time : 0.124s | 11 Queries | GZIP : On ]
(dh)