Stuck Sleeves
-
- Posts: 61
- Joined: Wed Jan 22, 2014 8:38 pm
- antispam: No
- Please enter the next number in sequence: 8
Stuck Sleeves
My drone main stock sleeve, and valve sleeve (Both sleeves that are tied into the bag) are currently stuck, and can't be removed with hand pressure. It looks like each have had Teflon tape applied underneath (its sticking out the end). What are next methods for freeing these, that won't cause any damage?
-
- Posts: 281
- Joined: Tue Nov 17, 2009 3:30 pm
- antispam: No
- Please enter the next number in sequence: 8
- Tell us something.: Uilleann piper from Maigh-eo now in Northeast US. Flute noob. Learn a lot from the discussion threads.
Re: Stuck Sleeves
The stock has expanded with warmer/damper air. You need to get that lumber into a cooler/drier space so it can shrink down a bit.
Once you get the stock out- get that plumbers’ tape off there, and re-hemp the stock. The “ Goldilocks” method: not too snug or not too loose..... you don’t want to jam the stock in, but you also don’t want the drones shooting out of the bag like a rocket. (done that)
Don’t use plumbers’ tape! Yellow unwaxed pipers’ hemp (unless you’re a Rogge man- then its Red Thread, Red Thread...s)
Once you get the stock out- get that plumbers’ tape off there, and re-hemp the stock. The “ Goldilocks” method: not too snug or not too loose..... you don’t want to jam the stock in, but you also don’t want the drones shooting out of the bag like a rocket. (done that)
Don’t use plumbers’ tape! Yellow unwaxed pipers’ hemp (unless you’re a Rogge man- then its Red Thread, Red Thread...s)
-
- Posts: 26
- Joined: Wed Apr 02, 2014 1:30 pm
- antispam: No
- Please enter the next number in sequence: 8
- Tell us something.: Living near hannover lower saxony germany and try to play pipes selfteached since 1980, now mainly on a flat set by Andreas
Re: Stuck Sleeves
hi
years ago i must take the hard way, cause i used to much yellow hemp with my Rogge stock....
i put Stock and Bag with this brass ring/fitting (whats the correct name for it?) without Drones/Regs and Reeds !!! into a refrigerator/icebox for a few hours to cool it down, then warm up
only the brass ring with a hairdryer...
it works fine, but its not the method for everyone, be careful
cheers Kuddel
years ago i must take the hard way, cause i used to much yellow hemp with my Rogge stock....
i put Stock and Bag with this brass ring/fitting (whats the correct name for it?) without Drones/Regs and Reeds !!! into a refrigerator/icebox for a few hours to cool it down, then warm up
only the brass ring with a hairdryer...
it works fine, but its not the method for everyone, be careful
cheers Kuddel