Chiff and Fipple Forums
http://forums.chiffandfipple.com/

Device for extending bag to accommodate a flat chanter.
http://forums.chiffandfipple.com/viewtopic.php?f=6&t=108516
Page 1 of 1

Author:  john [ Fri Apr 26, 2019 10:47 am ]
Post subject:  Device for extending bag to accommodate a flat chanter.

Does anyone make these for sale?
Thanks.

Author:  NicoMoreno [ Fri Apr 26, 2019 11:51 am ]
Post subject:  Re: Device for extending bag to accommodate a flat chanter.

One brass/metal tube and a rubber hose to attach should be pretty simple to find at any hardware store... I'll sell you one for $1000 :D

Author:  bensdad [ Thu May 02, 2019 7:18 am ]
Post subject:  Re: Device for extending bag to accommodate a flat chanter.

I have a better, cheaper, more ergonomic, ecologic, and, frankly, better looking one available for $1200.

Author:  Ceann Cromtha [ Thu May 02, 2019 1:37 pm ]
Post subject:  Re: Device for extending bag to accommodate a flat chanter.

Somewhere there are pictures of Joey Abarta playing his then set of pipes with this device attached between his chanter stock and chanter. May have been ten years ago or so, but comments were made on the Forum about it. I’ve made one in a pinch — all you need is a small section of hose, a couple of pieces of brass or whatever tubing and hemp, thread or what have you. Good luck.

Author:  oleorezinator [ Sun May 05, 2019 6:28 pm ]
Post subject:  Re: Device for extending bag to accommodate a flat chanter.

Ceann Cromtha wrote:
Somewhere there are pictures of Joey Abarta playing his then set of pipes with this device attached between his chanter stock and chanter. May have been ten years ago or so, but comments were made on the Forum about it. I’ve made one in a pinch — all you need is a small section of hose, a couple of pieces of brass or whatever tubing and hemp, thread or what have you. Good luck.

Joey has a short piece of flexible vinyl tubing.

Author:  Ceann Cromtha [ Mon May 06, 2019 1:57 am ]
Post subject:  Re: Device for extending bag to accommodate a flat chanter.

Exactly.

Author:  PJ [ Mon May 06, 2019 8:06 am ]
Post subject:  Re: Device for extending bag to accommodate a flat chanter.

I've made one from two short brass tubes. One had an inner diameter of 3/8" and fitted snugly over the air intake on my chanter. The other had a outter diameter of 3/8" and fitted snugly into the first tube. I wrapped the lot in waxed hemp and plugged in into the bag. Worked fine for years.

Author:  rorybbellows [ Mon May 06, 2019 8:37 am ]
Post subject:  Re: Device for extending bag to accommodate a flat chanter.

A young Joey , Ah doesn't it take ya back to when he was a wee gossun taking the Uilleann pipe world by storm.

https://vimeo.com/400610

RORY

Author:  Ceann Cromtha [ Mon May 06, 2019 11:42 am ]
Post subject:  Re: Device for extending bag to accommodate a flat chanter.

That’s it. The one brass (or what have you) tube goes into one end of the tubing and the part of that which sticks out can be wound with hemp (or what have you) and inserted into the chanter stock. The other brass (etc. air) tube of the chanter then can go into the hose. (In my quick description above I forgot the the other metal tube was the air tube of the chanter itself... but there are two metal tubes in the two ends of the hose :) )

Author:  Juan Pablo Plata [ Tue May 07, 2019 9:36 am ]
Post subject:  Re: Device for extending bag to accommodate a flat chanter.

I asked Mr. Rogge for it when my B set was near to be finished. Just contact your maker!

Author:  oleorezinator [ Mon May 20, 2019 8:26 am ]
Post subject:  Re: Device for extending bag to accommodate a flat chanter.

https://youtu.be/mdPho8LnzHQ

Author:  m4malious [ Sat May 25, 2019 3:29 am ]
Post subject:  Re: Device for extending bag to accommodate a flat chanter.

Slightly more swish -

Image

Get your local mechanic going on the brake-line-bender....

Page 1 of 1 All times are UTC - 6 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/