CP: "Uilleann" iPad app now with MIDI Chanter support!
Posted: Mon May 21, 2018 1:40 pm
Some very exciting news, inspired by the upcoming release of the Fagerström Technopipes Uilleann model!
I've added the ability to control my iPad "Uilleann" app from MIDI chanters and other MIDI controllers!
The new version adds two additional controls available by touching on the the MIDI icon at the lower left of the screen. The first sets the MIDI channel (1-16) of the MIDI controller, the other sets the transpose of the controller so that the lowest note is MIDI note 62 (D above middle-C). Both values are saved so you only have to do this once. After that, plug in your Technopipes via an hardware MIDI interface (I'm using the older iRig MIDI from IK Multimedia), fire up the Uilleann app and start playing!
Drone control is done by sending any MIDI Note-On message (note < 80) on MIDI channel 15. The drone will turn on and stay on until it receives a matching MIDI Note-Off message for the note number.
Version 8.0.2 for iPad was just approved by Apple and is a free update for current owners, $4.99 for new purchase. An iPhone version is in the works and should be out by June 1.
Here's a demo video showing the Uilleann app being controlled by the upcoming Fagerström Technopipes Uilleann model first playing a bit of a jig with the app in concert pitch D, then shifting the app down to B and playing an air:
https://youtu.be/E8YlROab7xw
Of course you can still play the iPad app manually:
https://youtu.be/O0DSPw75krM
Cheers and thanks,
Michael
I've added the ability to control my iPad "Uilleann" app from MIDI chanters and other MIDI controllers!
The new version adds two additional controls available by touching on the the MIDI icon at the lower left of the screen. The first sets the MIDI channel (1-16) of the MIDI controller, the other sets the transpose of the controller so that the lowest note is MIDI note 62 (D above middle-C). Both values are saved so you only have to do this once. After that, plug in your Technopipes via an hardware MIDI interface (I'm using the older iRig MIDI from IK Multimedia), fire up the Uilleann app and start playing!
Drone control is done by sending any MIDI Note-On message (note < 80) on MIDI channel 15. The drone will turn on and stay on until it receives a matching MIDI Note-Off message for the note number.
Version 8.0.2 for iPad was just approved by Apple and is a free update for current owners, $4.99 for new purchase. An iPhone version is in the works and should be out by June 1.
Here's a demo video showing the Uilleann app being controlled by the upcoming Fagerström Technopipes Uilleann model first playing a bit of a jig with the app in concert pitch D, then shifting the app down to B and playing an air:
https://youtu.be/E8YlROab7xw
Of course you can still play the iPad app manually:
https://youtu.be/O0DSPw75krM
Cheers and thanks,
Michael