I've got an old Pipeworks of Boston chanter that I'm interested in reeding up. I don't have an old reed to look at, so wondering if anyone has any numbers to start with for this?
I know it's based on an older good Quinn chanter if that helps...
Also, any ideas for contacting the original makers?
Reed making numbers for Boston Pipeworks chanter
- elbowmusic
- Posts: 267
- Joined: Fri Jun 03, 2005 11:27 am
- antispam: No
- Please enter the next number in sequence: 8
- Tell us something.: I'm back in the uilleann piping world after a ten year hiatus. Uilleann piping chops, here I come!
I'm a smallpipe and Border pipe maker and we'll just see where that leads to. - Location: Howl's Unmoving Castle
- Contact:
Reed making numbers for Boston Pipeworks chanter
-Nate Banton-
Smallpipes and Border Pipes http://www.natebanton.com
Smallpipes and Border Pipes http://www.natebanton.com
- MarcusR
- Posts: 1059
- Joined: Mon Jul 09, 2001 6:00 pm
- Please enter the next number in sequence: 1
- Location: I stay in a place called 'Rooms'... There's a whole chain of them.
Re: Reed making numbers for Boston Pipeworks chanter
There is no such thing as tailwind -- it's either against you or you're simply having great legs!
- myrddinemrys
- Posts: 645
- Joined: Sat Jan 22, 2005 9:34 am
- antispam: No
- Please enter the next number in sequence: 8
- Tell us something.: Something something Something something Something something Something something Something something Something something Something something Something something.
- Location: Ravenna, OH
- Contact:
Re: Reed making numbers for Boston Pipeworks chanter
You would do fine with what is generally followed for a Rowesome style reed, and substitute with a tubing staple.
Wild Goose Studios Music, reed making and pipe making.
- elbowmusic
- Posts: 267
- Joined: Fri Jun 03, 2005 11:27 am
- antispam: No
- Please enter the next number in sequence: 8
- Tell us something.: I'm back in the uilleann piping world after a ten year hiatus. Uilleann piping chops, here I come!
I'm a smallpipe and Border pipe maker and we'll just see where that leads to. - Location: Howl's Unmoving Castle
- Contact:
Re: Reed making numbers for Boston Pipeworks chanter
Thanks guys! I'll see what I come up with...
-Nate Banton-
Smallpipes and Border Pipes http://www.natebanton.com
Smallpipes and Border Pipes http://www.natebanton.com
- elbowmusic
- Posts: 267
- Joined: Fri Jun 03, 2005 11:27 am
- antispam: No
- Please enter the next number in sequence: 8
- Tell us something.: I'm back in the uilleann piping world after a ten year hiatus. Uilleann piping chops, here I come!
I'm a smallpipe and Border pipe maker and we'll just see where that leads to. - Location: Howl's Unmoving Castle
- Contact:
Re: Reed making numbers for Boston Pipeworks chanter
So on that website the numbers for the tubing staple talk about 5 mm outside diameter .02 inches inside diameter. I'm just gonna ignore the inside diameter number.... should I assume that that tubing is probably 3/16" hobby tubing?.
-Nate Banton-
Smallpipes and Border Pipes http://www.natebanton.com
Smallpipes and Border Pipes http://www.natebanton.com