f key come loose
f key come loose
is attaching a key a simple 5 minute job for a pipemaker? my f nat fell off earlier so i had to tape up the hole
-
- Posts: 358
- Joined: Wed Apr 12, 2006 4:41 am
- Please enter the next number in sequence: 1
- Location: North Eastern Palaearctic
Re: f key come loose
IF, as I assume the pin has fallen out of the block, then it is just a quick job. Get some brass rod of correct dimension from a model shop, cut of a suitable length and re fix key. No need for a pipemaker.
You might ask why it has fallen out. These pins on my set need pushing back in after heavy use. But they need to be free enough for maintenance of key pads, or what ever. I assume key tension was ok.
You might ask why it has fallen out. These pins on my set need pushing back in after heavy use. But they need to be free enough for maintenance of key pads, or what ever. I assume key tension was ok.