I'm new to the flange world. What would you suggest I get?
I was thinking one of these maybe:
http://cgi.ebay.com/ebaymotors/Triple-D ... enameZWDVW
Or should I be warry of ebay flanges? Any recomendations would be really helpful.
Thanks,
Flanges on ebay
- lordofthestrings
- Posts: 583
- Joined: Sun Oct 01, 2006 5:51 pm
- antispam: No
- Please enter the next number in sequence: 8
- Location: Mundelein, IL
Flanges on ebay
- - - Spence - - -
A little autobiography, including pictures, Here
Actually, I hate music. I'm only doing this for the money.
A little autobiography, including pictures, Here
Actually, I hate music. I'm only doing this for the money.
- Montaigne
- Posts: 4
- Joined: Sat Nov 04, 2006 5:03 pm
- Please enter the next number in sequence: 1
- Location: fuzzy eastern edge of the known universe; sometimes Iceland
Flanges on ebay
There's a lot of good o'pinion drivin' this thread, both front and rear, but it makes little differential in the calculus of spline-to-axle ratios, whether you're Packin' a Stan, or a Lunch or a Baggis flange. LITM's aside, you'll be needin' mighty good spicer gear just to get this baby to whine a bit. Finally, you'll no get a toyota to whistle, no matter how long ye blow -- too much flangst, the spacing's all wrong and three toed sloth would be full-time busy, just to cover using all four limbs. You'll want a professional flange spanner just to assemble that bugger.
Overvoiced seems the the way to go hear.
Overvoiced seems the the way to go hear.
- lordofthestrings
- Posts: 583
- Joined: Sun Oct 01, 2006 5:51 pm
- antispam: No
- Please enter the next number in sequence: 8
- Location: Mundelein, IL
hmmm.... interesting....
so where would a good place to look for a moderately priced, beginer-intermediate flange that will last me a while? And what would be the best way to get in contact with a flange-miester in my area? I don't know if I'll be able to go in alone. This whole thing seems strangly similar to buying a musical instrument...
I heard about some website... flangeobsession.com...
so where would a good place to look for a moderately priced, beginer-intermediate flange that will last me a while? And what would be the best way to get in contact with a flange-miester in my area? I don't know if I'll be able to go in alone. This whole thing seems strangly similar to buying a musical instrument...
I heard about some website... flangeobsession.com...
- - - Spence - - -
A little autobiography, including pictures, Here
Actually, I hate music. I'm only doing this for the money.
A little autobiography, including pictures, Here
Actually, I hate music. I'm only doing this for the money.
- flanum
- Posts: 1289
- Joined: Fri Jun 17, 2005 11:54 am
- Please enter the next number in sequence: 1
- Location: Cavan via Dublin, Skerries, Donabate, Ballinagh, Cavan, Ballyconnell, Ballinamore, Athlone, Cavan,
- Contact:
this is BRIGADIER GENERAL OTTO F. LANGE
General Lange joined the 36th as Assistant Division Commander at Camp Blanding, Fla., in the spring of '42. He served in that capacity during the final training days on the East Coast and in North Africa. A West Pointer also, General Lange fought at Verdun and Toul in World War I, was awarded the French Croix de Guerre. He had several teaching assignments between the wars, became Professor of Military Science at the University of Florida
Listen to me young fellow, what need is there for fish to sing when i can roar and bellow?
- The_Celtic_Bard
- Posts: 220
- Joined: Thu Nov 15, 2007 9:46 pm
- Please enter the next number in sequence: 1
- Location: Milwaukee
http://cgi.ebay.com/ebaymotors/Integra- ... otohosting
I could really use this flange, I think it would be perfect for my aquatachanter
I could really use this flange, I think it would be perfect for my aquatachanter
Why build character when you already are one?
- Dale
- The Landlord
- Posts: 10293
- Joined: Wed May 16, 2001 6:00 pm
- Please enter the next number in sequence: 1
- Location: Chiff & Fipple's LearJet: DaleForce One
- Contact:
Possible threads for flange forum.
Flanges for beginners.
Avoiding cheap, mass-produced flanges.
A thread about how it doesn't really matter what kind of flange you have. A cheap one is perfectly fine if you're good at working flanges.
Is there a flange? What is the nature of flange? Why do some people insist on believing in flanges?
Flanges for beginners.
Avoiding cheap, mass-produced flanges.
A thread about how it doesn't really matter what kind of flange you have. A cheap one is perfectly fine if you're good at working flanges.
Is there a flange? What is the nature of flange? Why do some people insist on believing in flanges?