It is currently Fri Dec 06, 2019 7:07 pm

All times are UTC - 6 hours




Post new topic Reply to topic  [ 6 posts ] 
Author Message
 
PostPosted: Fri Sep 27, 2019 2:41 pm 
Offline
User avatar

Joined: Fri Jan 04, 2019 1:40 pm
Posts: 98
Location: Arvada, Colorado USA
Any ideas where I could obtain some bamboo or river cane about an inch in OD, and like 3/4 to 7/8 ID? Needs to be 18 inches long or so, depending on the ID.

Also interested in suggestions of other materials. Don't really want to go PVC on this one, but I don't have the means of boring it out. I guess I could do the split and router thing on some wood.

All ideas given the consideration they deserve. :party:

_________________
Cheers!

Michael
Living the Rainbow Life!


Top
 Profile  
Reply with quote  
 
PostPosted: Sat Sep 28, 2019 8:41 pm 
Offline

Joined: Fri Sep 14, 2018 6:00 pm
Posts: 40
Location: Lexington, NC
Michael,
You may wish to contact one of the flute makers who frequently work in bamboo. One of them might be willing to sell some lengths of bamboo, possibly with the internal nodes removed. Two that come to mind are Ed (Greybeard) at Tree of Life Designs, or George at MedicineWind. They might even have some very long node stock that would not require boring.

Another option is to try one in clay.

Have fun with your projects.

Chris


Top
 Profile  
Reply with quote  
 
PostPosted: Sat Sep 28, 2019 11:05 pm 
Offline

Joined: Sat Mar 15, 2003 8:06 pm
Posts: 376
Years ago I used to pick up bamboo at Pier One Imports or World Market stores. They used to sell it in 5 or six foot lengths in the diameters you mention. I use it for curtain rods. But since the accidental import of the Emerald Ash Borer from Asia to the midwestern US those imports may have slowed down.

If you are in or near a major city with an Asian population there also may be small shops that would import bamboo for decorative purposes.

I'm sure some research would lead you to a way to devise a hand tool to ream it out. They have been doing it for centuries in many cultures. Though the "by hand" thing sounds pretty labor intensive. Reaming out a piece of bamboo is a heck of a lot easier than boring a length of blackwood, but it is still going to be labor intensive. :D


Top
 Profile  
Reply with quote  
 
PostPosted: Wed Oct 23, 2019 4:09 pm 
Offline

Joined: Sun May 01, 2016 6:54 am
Posts: 274
You could use aluminium. I have a quena made from it. And it is easier to work with than you might think. Aluminium is so soft that you can even drill it with a hand-held cordless screwdriver (of course you need a drill bit for metal). The fipple can be cut with a little metal saw and then filed. Not that hard. In fact, now that I started making whistles from aluminium, I think it is nicer to work with than PVC. Drilling holes in PVC is tricky because it is so soft. Aluminium tubes in a many sizes can be bought from any hardware store. They are cheap.


Top
 Profile  
Reply with quote  
 
PostPosted: Wed Oct 23, 2019 5:04 pm 
Offline

Joined: Sun Oct 28, 2018 9:37 am
Posts: 57
Location: Texas USA
I eventually located a couple of a whole pile, given me by a neighbor here in S Texas. It grows all over the place. But it takes a while to dry out from green to that nice soft yellow you are used to. My two found pieces are 3 ft each and about 3/4 inch diameter.

_________________
"The more you weigh the harder you are to kidnap,
be safe, eat more ice-cream"

https://www.facebook.com/groups/1298297360297681/


Top
 Profile  
Reply with quote  
 
PostPosted: Mon Nov 25, 2019 1:52 am 
Offline

Joined: Fri Oct 29, 2010 4:27 pm
Posts: 494
A local garden supply centre had some growing for resale as "decorative features", they were happy to cut out a dead stem for me to take away ;) It's made a flute and a couple of whistles so far and there's still some left!

_________________
"I'm playing all the right notes—but not necessarily in the right order."


Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 

All times are UTC - 6 hours


Who is online

Users browsing this forum: No registered users and 11 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group
[ Time : 0.146s | 11 Queries | GZIP : On ]
(dh)