It is currently Thu Oct 19, 2017 7:47 pm

All times are UTC - 6 hours




Post new topic Reply to topic  [ 146 posts ]  Go to page Previous  1 ... 5, 6, 7, 8, 9, 10  Next
Author Message
 
PostPosted: Sun Oct 11, 2009 9:25 am 
Offline
User avatar

Joined: Wed Mar 31, 2004 8:49 pm
Posts: 3829
Location: Indianapolis, Indiana
jemtheflute wrote:
Well, thanks for the contribution, Vikram, and the more receptive attitude. Welcome.

I do think one thing stands out from your post - the issue of pitch. It is NOT normal to consider a note named D or, thence, a flute named as a "D Flute" to actually be an Eb! (This is a separate issue from that of "transposing instruments", where the 6-finger note is called "D" whatever actual pitch it plays.) As I think I wrote before, I strongly suspect your original model was a High Pitch flute - a Boosey Pratten style 8-key flute tuned at A=455 would closely approximate to an Eb flute at A=440. You need to re-scale your product and get it playing in true D at 440 to make a seriously necessary improvement - and to stop misleadingly advertising your current model as "in D" when it is not, so far as modern western players at International Concert Pitch are concerned (i.e. virtually all of us!). I disagree that a simple Google search will enable a beginner with no experience in the field to find out about and understand this. When they see a flute in a music shop or on eBay they will not know what questions to ask and will take things at face value - and probably buy a product that is not actually suitable to their wishes, however playable in its own right unaccompanied. Their ensuing dissatisfaction cannot be good for your business!

I see little point in merely improving the quality of an Eb/HP flute. Produce a flute that truly is in D at 440 and with properly made keys and a decently cut embouchure (and no burnt rubber smell!!!) and you'll get much better sales and a massively better reputation.

I wrote to the current lister of a similar flute on ebay, and he wrote back to explain about the Eb foot. They claim to be copying a modern Irish flute. I think the Eb key on the flute is similar to the same key on the silver Boehm flute. With six finger holes covered the Eb key on the foot is closed, and the flute plays low D. With the same six fingers covered and the Eb key depressed with the pinky to open the hole on the foot, the flute plays Eb, thus a low D flute with an Eb foot.

_________________
http://ie.youtube.com/user/dougsflutes
http://tippleflutes.com


Top
 Profile  
Reply with quote  
 
PostPosted: Sun Oct 11, 2009 10:23 am 
Offline
User avatar

Joined: Tue May 23, 2006 6:47 am
Posts: 6645
Location: N.E. Wales, G.B.
May be so in that case Doug - but definitely not in the Empire case (6 finger note, foot keys not operated = Eb real pitch) - and even with the one you are talking about, that is at best an awkward and nonsensical way to describe it!

As for your previous posy..... nice idea - thanks for the sales pitch! :wink: But seriously, although they're decent flutes, they are not what one would recommend as ideal choices to use as templates for a modern "production" version - something like a good example of a Boosey Pratten in D at 440 would be much more suitable!

_________________
I respect people's privilege to hold their beliefs, whatever those may be (within reason), but respect the beliefs themselves? You gotta be kidding!

My YouTube channel
Low Bb flute: Xmas Eve & The Providence (audio)
Flute & Music Resources - helpsheet downloads


Top
 Profile  
Reply with quote  
 
PostPosted: Fri Jan 01, 2010 8:07 pm 
Offline
User avatar

Joined: Sun Feb 01, 2009 8:09 am
Posts: 260
Location: Michigan, USA
Cross link to keep historical record of the McCarty flutes being Pakistani imports.

http://forums.chiffandfipple.com/viewtopic.php?f=2&t=73252

http://forums.chiffandfipple.com/viewtopic.php?f=2&t=73435

_________________
celticmodes
[Reviol 8 key | Oz Vambrace | Dusty Strings Ravenna | Luna Trinity Parlor]


Top
 Profile  
Reply with quote  
 
PostPosted: Wed Jan 27, 2010 2:37 pm 
Offline
User avatar

Joined: Wed Jan 27, 2010 2:29 pm
Posts: 40
Location: Edinburgh, Scotland
As someone who has just recently ordered her very first flute after a week of searching the Internet and trying to find out as much as possible, can I just say a big Thank you to this forum (especially for this thread).

I ordered a sweet heart keyless flute in D this morning (made from padauk,in the sale too!) and can't wait for it to be delivered.

Thanks.


Top
 Profile  
Reply with quote  
 
PostPosted: Mon Feb 15, 2010 11:55 am 
Offline
User avatar

Joined: Wed Jan 27, 2010 2:29 pm
Posts: 40
Location: Edinburgh, Scotland
Damnit! I can't put down this flute. Everytime I get bored sitting at my desk and need to think about work, I pick up the flute and get distracted.

I should have gone for some unwieldy instrument ...


Top
 Profile  
Reply with quote  
 
PostPosted: Sun Feb 21, 2010 1:44 pm 
Offline
User avatar

Joined: Tue Jan 19, 2010 10:56 pm
Posts: 587
Location: Columbus, OH
hi, i just got this from a seller on ebay:

From: eric brinkman
To: f1utesrus
Subject: eric brinkman has sent a question about item #260494522498, ending on 20-Mar-10 10:55:58 GMT - Irish Flute Key of D
Sent Date: 21-Feb-10 00:16:32 GMT

Dear f1utesrus,

hi, who made it?

- ericmbrinkman
---------------------------------
Dear ericmbrinkman,

It was made in pakistan.

- f1utesrus

so you'll note it's an "irish flute in the key of D", it looks beautiful in the photo, and it's not so cheap that you might guess it was from pakistan... also the seller, f1utesrus has a 100% rating on ebay... :( at least they were honest about where it came from anyway.

beware...

_________________
Sindt D | Gene Milligan blackwood D | Burke low D | Olwell keyless blackwood Eb/D/C flute
http://shakespeareanreview.com/


Top
 Profile  
Reply with quote  
 
PostPosted: Tue Jun 15, 2010 7:37 am 
Offline

Joined: Mon Jun 14, 2010 1:38 pm
Posts: 16
i just wanna shoot myself now. i bought that thing for 38 dollars. and instead of returning it i tried to tune it and adjust my playing for ten days. :(
wish i read this before buying


Top
 Profile  
Reply with quote  
 
PostPosted: Tue Jun 15, 2010 1:53 pm 
Offline
User avatar

Joined: Fri Dec 14, 2007 10:21 pm
Posts: 134
Location: Eastern Canada
Lone-Coyote wrote:
i just wanna shoot myself now. i bought that thing for 38 dollars. and instead of returning it i tried to tune it and adjust my playing for ten days. :(
wish i read this before buying



Don't let the loss of 10 days of your time and a measly 38 bucks discourage you. There are several options for inexpensive flutes for someone just starting out. Solutions are only a forum search away. Best of luck and don't give up.

_________________
Jigs: O'Shaunassey's and Dan Sullivan's Father's
Black Pat's reel


Top
 Profile  
Reply with quote  
 
PostPosted: Tue Jun 15, 2010 3:51 pm 
Offline
User avatar

Joined: Mon Nov 17, 2003 11:29 am
Posts: 24005
Location: N of Seattle
get a 2nd hand lamp shade, make the flute into a lamp and sell it :D

_________________
Picture a bright blue ball just spinning, spinning free
It's dizzying, the possibilities. Ashes, Ashes all fall down.


Top
 Profile  
Reply with quote  
 
PostPosted: Wed Nov 17, 2010 9:14 am 
Offline

Joined: Mon Nov 08, 2010 4:56 am
Posts: 16
Hello,

Some times I buy some flutes from Pakistan becouse are very cheap and repair it for my friends whos whant start play folk music. It is not simpe do it but possible.I change in that flute a lot of points: bore inside, mouthpiece, finger's hole, cork etc. After ,that flute play well but of course not like flutes from good makers.
If you are interested my work you can see it for

gtmusicalinstruments.com

regards
Gregor


Top
 Profile  
Reply with quote  
 
PostPosted: Sat May 21, 2011 6:49 pm 
Offline
User avatar

Joined: Sun Apr 27, 2003 4:56 pm
Posts: 806
Location: Somewhere over the Rainbow, EU
Pakistan flutes are always a loosing choice.
Is far better looking to buy a nice second hand flute made by a professional maker. Pakistan flutes are poorly made both in manufacture and in materials.


Top
 Profile  
Reply with quote  
 
PostPosted: Fri Sep 09, 2011 11:00 am 
Offline

Joined: Sat Jun 30, 2001 6:00 pm
Posts: 16413
viewtopic.php?f=3&t=63797&start=0


Top
 Profile  
Reply with quote  
 
PostPosted: Fri Sep 09, 2011 12:07 pm 
Offline
Moderatorer
User avatar

Joined: Wed Dec 18, 2002 6:00 pm
Posts: 32152
Location: Minneapolis
Well and good, Jim, but your no doubt well-intentioned metamoderating aside, the subject of Pakistani-made flutes is well confirmed, and probably never to be exhausted, from many accounts of personal experience (see the bolded content in the link you provided), my own included. They are not good instruments at all, and their proliferation counts as a real stumbling-block to those who would begin to seriously pursue simple-system fluteplaying, yet who are without good comparative information to guide them. Having started out on two such, myself - being thrift-minded and mistakenly assuming that one flute is a tube as good as any other - I developed some very hard-to-break bad embouchure habits on account of the poor playability of those instruments, and in short order I also came to see that their intonation and tone quality were plainly unacceptable for serious playing as well. Moreover I will second what radcliff said about their construction and materials, embouchure cuts and keywork in particular, as being easily substandard. That there was a general carelessness to the workmanship of my Pakistani flutes was obvious from the get-go even to a beginner such as I was. I could have gotten far better for investing only slightly more had I but known.

As I have said more than once, I would warmly applaud seeing a change for the better in these instruments, but that sort of change to date is not forthcoming, nor do the firms churning out these instruments appear to have any vested interest in real craft. I personally am forced to conclude that their motivation is only that of easy money, not in flutes as such, which instead are merely a convenient vehicle for profit suited as they are to the popular interests of the times. And so their buyers abound because of attractive pricing - of course - yet those who would be serious exponents always seem to post their regrets here afterward, a fact worth remembering. These instruments and the sweatshops making them have earned their well-deserved opprobium on their own steam, and there is no good in pussyfooting around that when it is a matter of one's experience.

_________________
"Dreams about the future are always filled with gadgets." - Neil deGrasse Tyson

"An anti-lunacy gadget would be nice..." - Nano


Top
 Profile  
Reply with quote  
 
PostPosted: Tue Jan 31, 2012 3:45 pm 
Offline
User avatar

Joined: Thu Jan 26, 2012 3:53 am
Posts: 18
Hi All,

I'm a newbie who just recently made my debut on the whistle forum. Wish my missus had read all this before she bought a cheap ebay flute for me for xmas. My fault for not doing my research and specifically stating what I wanted. Having played a Boehm flute for a good many years, I was able to get sound out of it, and can even get a nice tone out of it, though the E is out of tune with the rest of the instrument. It takes a great deal more breath control than a standard Boehm flute. It also has demonstrated to me how much an improvement ergonics is, the holes all in a line do cramp the fingers. I have enjoyed playing it, but it falls well short of what is required to be called a good flute, and would in my opinion fall under the classification of poor. I would think that a beginner would have a great deal of trouble. Luckily she did not pay much for it, it hasn't turned me off, it decided me to save up for a Casey Burns folk flute, and improve my whistle skills while I do.

Matt

_________________
Hey, I had one of those, but the fipple fell off.


Top
 Profile  
Reply with quote  
 
PostPosted: Mon Feb 06, 2012 9:51 am 
Offline
User avatar

Joined: Fri Sep 30, 2011 11:25 am
Posts: 198
It must be very hard to play the flute with no right hand. I'm sure that Casey Burns can make an ergonomic flute for your hook.


Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 146 posts ]  Go to page Previous  1 ... 5, 6, 7, 8, 9, 10  Next

All times are UTC - 6 hours


Who is online

Users browsing this forum: No registered users and 6 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group
[ Time : 0.143s | 13 Queries | GZIP : On ]
(dh)