It is currently Wed Jan 17, 2018 5:37 pm

All times are UTC - 6 hours




Post new topic Reply to topic  [ 1 post ] 
Author Message
 
PostPosted: Sat Jan 13, 2018 10:54 am 
Offline
User avatar

Joined: Fri Sep 02, 2005 8:37 pm
Posts: 83
Location: Siloam Springs, AR
See the eBay listing link below for the flute I am selling. It is a WEIKERT, stamped with a model name of 1st QUALITY. It was probably made before/around 1900. It has a metal lined head joint and the tuning slide is also metal lined. This plays quite well in tune to modern pitch, when pulled out as I have it in the pictures. The lowest note is D. And I will describe that more below.

I often recondition clarinets and have a site named http://clarinetpages.net. So I don't often recondition or sell flutes. I think this flute could be of interest to you readers who want a keyed flute for Irish music, but a soft one.

I own several Irish folk flutes and wanted one with keys. As is, this plays more like a classic or baroque flute. If it were modified, it would work better for Irish flute music, as explained below. The embouchure hole is 11.1mm long and 9.76 wide. My favorite Pratten style flute has an embouchure hole 12.3mm long and 10.5mm wide.

Typical of a Baroque flute or later flutes, the Eb key needs to be held down for the E to be in tune, and the F# is flat. (This was so Baroque players could lip up for F# and lip down for F natural— not using the keys this flute has.) But the F# on this flute is in tune with the F natural key depressed, or lipped up like Baroque players did. The C# is slightly flat, like Baroque flutes. The highest D on this flute wants to be fingered just like the middle D.

What the above means is this: This flute plays with a soft sweet tone, like a Baroque flute. It would work well for a Baroque flute, if the player only used the Eb key and ignored the other 5 keys. Or it could be used for later classical or folk music using the keys. This is the kind of music it was made for. Or, for Irish music, Irish players usually ignore most of the keys, and especially the Eb key. The bottom tone holes could be enlarged so that the low E and F# are in tune. The result would be a sweet and soft Irish flute— not for sessions, but for playing by oneself. The flute would sound somewhat louder if the embouchure hole was also enlarged by someone knowledgeable about wooden flutes. I cannot predict if this would make the flute session worthy.

https://www.ebay.com/itm/183011634302?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1558.l2649


Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 1 post ] 

All times are UTC - 6 hours


Who is online

Users browsing this forum: No registered users and 6 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group
[ Time : 0.108s | 13 Queries | GZIP : On ]
(dh)