Hi folks,
Quick question: have you seen anything similar before? Looks like the tenon is... like a tuning slide?
Anyone can shed some light?
Weird tenon ?
- kkrell
- Posts: 4834
- Joined: Mon Jul 29, 2002 6:00 pm
- antispam: No
- Please enter the next number in sequence: 8
- Tell us something.: Mostly producer of the Wooden Flute Obsession 3-volume 6-CD 7-hour set of mostly player's choice of Irish tunes, played mostly solo, on mostly wooden flutes by approximately 120 different mostly highly-rated traditional flute players & are mostly...
- Location: Los Angeles
- Contact:
Re: Weird tenon ?
Try asking flutemaker Jon C. (Jon Cornia of Cochran flutes) on this forum. Those look like the decorative rings he uses. Isn't the flute marked, or did you just come across a picture?
- Matt_Paris
- Posts: 417
- Joined: Fri Oct 01, 2004 5:31 am
Re: Weird tenon ?
Leboncoin.fr is some kind of french craigslist...
I found the original posting:
https://www.leboncoin.fr/instruments_de ... tm?ca=21_s
The flute is from Glen Lebot. So he's the guy who should be contacted:
http://glenlebot-instruments.com/
Nice and slightly weird looking... I have no idea if his flutes are good.
I found the original posting:
https://www.leboncoin.fr/instruments_de ... tm?ca=21_s
The flute is from Glen Lebot. So he's the guy who should be contacted:
http://glenlebot-instruments.com/
Nice and slightly weird looking... I have no idea if his flutes are good.
- kkrell
- Posts: 4834
- Joined: Mon Jul 29, 2002 6:00 pm
- antispam: No
- Please enter the next number in sequence: 8
- Tell us something.: Mostly producer of the Wooden Flute Obsession 3-volume 6-CD 7-hour set of mostly player's choice of Irish tunes, played mostly solo, on mostly wooden flutes by approximately 120 different mostly highly-rated traditional flute players & are mostly...
- Location: Los Angeles
- Contact:
Re: Weird tenon ?
Well-spotted. I had a look at his website, and it appears that he makes one model with a metal sleeve body that receives a simpler (1 piece) headjoint than as shown in the OP's photo. He also makes the more conventional 2-piece headjoint/tuning slide, which joins to a corked tenon on the upper joint. The OP photo seems to mix the 2.Matt_Paris wrote: The flute is from Glen Lebot. So he's the guy who should be contacted:
http://glenlebot-instruments.com/
Sorry, but the photos are large, so scrolling happens here.
Conventional head with tuning slide:
One-piece (monoblock?) head:
- Latticino
- Posts: 444
- Joined: Tue Aug 05, 2008 7:30 pm
- antispam: No
- Please enter the next number in sequence: 8
- Location: Upstate NY
Re: Weird tenon ?
Interesting/unusual Bb key as well.
"Experience is something you don't get until just after you need it"
Steven Wright
"Your reality, sir, is lies and balderdash and I'm delighted to say that I have no grasp of it whatsoever."
Baron Munchausen
Steven Wright
"Your reality, sir, is lies and balderdash and I'm delighted to say that I have no grasp of it whatsoever."
Baron Munchausen
- kkrell
- Posts: 4834
- Joined: Mon Jul 29, 2002 6:00 pm
- antispam: No
- Please enter the next number in sequence: 8
- Tell us something.: Mostly producer of the Wooden Flute Obsession 3-volume 6-CD 7-hour set of mostly player's choice of Irish tunes, played mostly solo, on mostly wooden flutes by approximately 120 different mostly highly-rated traditional flute players & are mostly...
- Location: Los Angeles
- Contact:
Re: Weird tenon ?
Not that unusual. Right-hand operation, possibly as an accomodation to someone for comfort. He could probably whip up the more obvious key as well. His keyless flutes without the full tuning slide seem reasonably priced. Those patterned rings are still very much like Jon C.s. I wonder if they share the sourcing for them.Latticino wrote:Interesting/unusual Bb key as well.
- Jon C.
- Posts: 3526
- Joined: Wed Nov 07, 2001 6:00 pm
- antispam: No
- Please enter the next number in sequence: 8
- Tell us something.: I restore 19th century flutes, specializing in Rudall & Rose, and early American flutes. I occasionally make new flutes. Been at it for about 15 years.
- Location: San Diego
Re: Weird tenon ?
Looks like a broken tenon repair to me, not to hard to replace.
"I love the flute because it's the one instrument in the world where you can feel your own breath. I can feel my breath with my fingers. It's as if I'm speaking from my soul..."
Michael Flatley
Jon
Michael Flatley
Jon
- kkrell
- Posts: 4834
- Joined: Mon Jul 29, 2002 6:00 pm
- antispam: No
- Please enter the next number in sequence: 8
- Tell us something.: Mostly producer of the Wooden Flute Obsession 3-volume 6-CD 7-hour set of mostly player's choice of Irish tunes, played mostly solo, on mostly wooden flutes by approximately 120 different mostly highly-rated traditional flute players & are mostly...
- Location: Los Angeles
- Contact:
Re: Weird tenon ?
It looks like one, but I think it may be the inner sleeve of a barrel-less slide design (monoblock head) intended by this French maker. The other pics show what may be an engraved (choice of) brass or silver-colored receiver that is part of the head. How's your French? I used Google Translate.Jon C. wrote:Looks like a broken tenon repair to me, not to hard to replace.
-
- Posts: 79
- Joined: Sun Mar 15, 2015 1:01 am
- antispam: No
- Please enter the next number in sequence: 8
Re: Weird tenon ?
Thanks all! I was just curious, as it does look like an in-between.