Question: Tuning Fiddle Down

Our first forum for instruments you don't blow.
Post Reply
User avatar
Ceann Cromtha
Posts: 883
Joined: Mon Aug 01, 2005 5:03 pm
antispam: No
Please enter the next number in sequence: 8
Tell us something.: I’m changing my location to my actual address. My previous location was a reference to Joyce’s Finnegans Wake.
Location: Baltimore, Maryland USA

Question: Tuning Fiddle Down

Post by Ceann Cromtha »

Greetings! I play uilleann pipes and my youngest daughter's violin teacher wants her and me to play together at her next recital. I quickly learned in our practice sessions that my concert pitched D set (A =440 Hz) is too loud for her 1/2 sized violin. So, I think I'll try my C# set instead. The only question is: how do I tune her violin down one step (?) to accommodate my chanter. What is the procedure I should use? I know that this probably sounds like a stupid question, but, I've never done it before. Thanks!
Tunborough
Posts: 1419
Joined: Sun Dec 05, 2010 2:59 pm
antispam: No
Please enter the next number in sequence: 10
Location: Southwestern Ontario

Re: Question: Tuning Fiddle Down

Post by Tunborough »

How do you tune the violin now? If you tune it to G D A E with an electric tuner, use the tuner to tune it to F# C# G# and D# (or Gb Db Ab Eb). If you tune the A string to a piano and tune the other strings from the A, tune the A string to G#/Ab on the piano (or on your chanter), and tune the other strings from the A string. You may need to re-tune frequently until it settles in to the new tuning.

Be aware that the tone of a 1/2-size violin is already challenged because of the smaller size, and tuning it flat will make it that much worse.
User avatar
benhall.1
Moderator
Posts: 14797
Joined: Wed Jan 14, 2009 5:21 pm
antispam: No
Please enter the next number in sequence: 8
Tell us something.: I'm a fiddler and, latterly, a fluter. I love the flute. I wish I'd always played it. I love the whistle as well. I'm blessed in having really lovely instruments for all of my musical interests.
Location: Unimportant island off the great mainland of Europe

Re: Question: Tuning Fiddle Down

Post by benhall.1 »

I would do it carefully. Personally, I'd want to loosen the E string a bit before tackling the other strings. If, as is likely, the adjuster on the E string is tightened to some extent, undo the adjuster a bit to bring the E string down a bit. Then have a go at the other strings.

When you come to tune the fiddle back up, it will seem like you're tuning the strings to breaking point. It should be OK, but I don't like tuning and re-tuning too much as it can put additional strain on the strings.
User avatar
Ceann Cromtha
Posts: 883
Joined: Mon Aug 01, 2005 5:03 pm
antispam: No
Please enter the next number in sequence: 8
Tell us something.: I’m changing my location to my actual address. My previous location was a reference to Joyce’s Finnegans Wake.
Location: Baltimore, Maryland USA

Re: Question: Tuning Fiddle Down

Post by Ceann Cromtha »

Thanks for the thoughtful and very helpful responses!
User avatar
sbfluter
Posts: 1411
Joined: Wed Aug 22, 2007 12:31 pm

Re: Question: Tuning Fiddle Down

Post by sbfluter »

[Thread revival. - Mod]

Just twist the knobs a little. It doesn't take much. I play old-time music and regularly tune it up to AEAE or down to GDGD so it's really no big deal. Use a clip-on tuner and it'll be much easier.
~ Diane
Flutes: Tipple D and E flutes and a Casey Burns Boxwood Rudall D flute
Whistles: Jerry Freeman Tweaked D Blackbird
Post Reply