Wide-body D for beginner?
-
- Posts: 14
- Joined: Sat Aug 29, 2020 12:31 pm
- antispam: No
- Please enter the next number in sequence: 8
- Tell us something.: New whistle player looking to upgrade from a mass-produced whistle to something intermediate. Apparently that didn't equal 100 characters or more, but I have little to add other than that I am currently playing a Clarke original, Freeman tweak.
Wide-body D for beginner?
Greetings, all. I am a new whistle player who has a thumb injury that makes holding a narrow-body whistle very difficult. I'm currently playing a tweaked OG Clarke that I've glued a big leather pad on the back of to be able to hold it, but I'm ready to move on. It's a bit Frankenstein-ish and I don't like how screechy the highest notes are. I ordered a Freeman Mellow Dog a few months ago, but... I'm wondering if there's a good option in a wide-body while I wait for that and/or if there is a step up I should consider.
Re: Wide-body D for beginner?
Greetings Garick,
I've used leather myself in making "accessories" for my whistles.
Is there any chance you could post a photo of yours ?
On the subject of "wide" whistles, most of my high-D's are very similar in size. Now, as you change whistle key, the diameters can get much larger. My low-D's are easily twice the diameter of the high ones.
Also, have you seen the whistles offered by Susato ? They come with thumb-rests that clip on. They also sell the thumb-rests separately. See: https://www.susato.com/
Also, if you like backpressure, the low whistles by Reyburn are winners ! I love them !
Welcome to whistling !
trill
I've used leather myself in making "accessories" for my whistles.
Is there any chance you could post a photo of yours ?
On the subject of "wide" whistles, most of my high-D's are very similar in size. Now, as you change whistle key, the diameters can get much larger. My low-D's are easily twice the diameter of the high ones.
Also, have you seen the whistles offered by Susato ? They come with thumb-rests that clip on. They also sell the thumb-rests separately. See: https://www.susato.com/
Also, if you like backpressure, the low whistles by Reyburn are winners ! I love them !
Welcome to whistling !
trill
- facet
- Posts: 57
- Joined: Mon Jan 27, 2020 4:22 pm
- antispam: No
- Please enter the next number in sequence: 8
- Tell us something.: A whistle will get you through times of no money better than money will get you through times of no whistle.
- Location: Seattle
Re: Wide-body D for beginner?
There is a good, possibly better option. The tube diameter of the Freeman Mellow D is 9/16". Checkout the two Hermit Hill Delrin D's which have a tube diameter of 3/4". http://www.hhfi.biz/products.html
- RoberTunes
- Posts: 326
- Joined: Tue Oct 01, 2019 3:33 pm
- antispam: No
- Please enter the next number in sequence: 8
- Tell us something.: I am a flute, guitar, keyboard + whistle player learning about quality whistles, musical possibilities and playing techniques. I've recorded a CD of my own music and am creating music for kids.
- Location: North America
Re: Wide-body D for beginner?
If you haven't yet received the Freeman, to get familiar with it, I wouldn't be spending much money during the wait. The standard Walton's Mellow D right out of the box won't be too far off and gets good reviews. It's one of the least expensive whistles available.
- TxWhistler
- Posts: 226
- Joined: Tue May 26, 2020 9:15 am
- antispam: No
- Please enter the next number in sequence: 8
- Tell us something.: I have recently retired and have always wanted to learn to play a musical instrument. I'm leaning to play the whistle and now the flute.
- Location: Tyler, Texas
Re: Wide-body D for beginner?
BINGO!!!! What he said!RoberTunes wrote:If you haven't yet received the Freeman, to get familiar with it, I wouldn't be spending much money during the wait. The standard Walton's Mellow D right out of the box won't be too far off and gets good reviews. It's one of the least expensive whistles available.
I wished my first whistle had been a Waltons Mellow D. When I finally got around to ordering one I had low expectations due to how low the price was. When it arrived I was very very impressed.
I can only speak for mine and it is mellow, the notes are strong and stable. You can get into the high second octave notes (A, B C#) easily and it doesn't kill my hearing like some of my high D's do.
No it's not the perfect whistle but for a beginner, it is one that I would highly recommend.
-
- Posts: 14
- Joined: Sat Aug 29, 2020 12:31 pm
- antispam: No
- Please enter the next number in sequence: 8
- Tell us something.: New whistle player looking to upgrade from a mass-produced whistle to something intermediate. Apparently that didn't equal 100 characters or more, but I have little to add other than that I am currently playing a Clarke original, Freeman tweak.
Re: Wide-body D for beginner?
Thanks for the kind welcome, folks. I thought about just trying the Mellow D, but at its price point I feared it. I'll give it a shot.
I will admit to a prejudice against plastic instruments, as I always fear they will sound like the elementary school recorder of my youth.
I came to the whistle via a long and winding road. Having married a fiddler/step-dancer, I am often the guy just drinking beer while everyone else plays music and/or dances. Due to a (different) injury, dancing is right out, and my previous instruments of trombone and drum kit are far from Celtic. I originally thought I'd try the button accordion, but the cats are convinced that it is some sort of torture device. As soon as I unstrap the box, the cats flee to the farthest regions of the house. On our last trip to Ireland, my wife bought a couple of budget whistles at Custy's on the "much easier to travel with than a fiddle" theory. Turns out the cats love the tin whistle and come running like the pied piper is playing their favorite tune, so I bought one for myself. It's nice to have an instrument that actually get appreciated during practice.
I will admit to a prejudice against plastic instruments, as I always fear they will sound like the elementary school recorder of my youth.
Sure. It doesn't look like much. Just some scrap leather and Shoe Goo.trill wrote:I've used leather myself in making "accessories" for my whistles.
Is there any chance you could post a photo of yours ?
I came to the whistle via a long and winding road. Having married a fiddler/step-dancer, I am often the guy just drinking beer while everyone else plays music and/or dances. Due to a (different) injury, dancing is right out, and my previous instruments of trombone and drum kit are far from Celtic. I originally thought I'd try the button accordion, but the cats are convinced that it is some sort of torture device. As soon as I unstrap the box, the cats flee to the farthest regions of the house. On our last trip to Ireland, my wife bought a couple of budget whistles at Custy's on the "much easier to travel with than a fiddle" theory. Turns out the cats love the tin whistle and come running like the pied piper is playing their favorite tune, so I bought one for myself. It's nice to have an instrument that actually get appreciated during practice.
-
- Posts: 94
- Joined: Fri Nov 15, 2019 3:31 pm
- antispam: No
- Please enter the next number in sequence: 8
- Tell us something.: I just bought a Clarke Sweetone and I’m interested in learning how to play it. My goal is to be able to play the whistle without my family complaining too much.
Re: Wide-body D for beginner?
A plastic whistle may also suite you. I have a Dixon DX005 and a Parks Walkabout that are both relatively wide diameter.
-
- Posts: 2
- Joined: Mon Aug 31, 2020 8:23 am
- antispam: No
- Please enter the next number in sequence: 8
- Tell us something.: Among other instruments play high and low D whistle have both high low D Chieftains.
Getting old but still learning. Pokerwork G/D, Saltarelle L'Elfique G/D, Castagnari Lilly G/D and Hohner Liliput Declubed G/D melodeons, + English concertinas, mandolins, recorders, tin whistles and other items unknown to household managment. - Location: Chertsey, Surrey, England, UK
Re: Wide-body D for beginner?
Hi Garick, I'm new to this forum but for what its worth have a look at a Chieftain high D. I have both the Chieftain and a Feadog Pro high D. The internal bore of the Chieftain is 19mm while the Feadog is 12mm. This does not sound much different but the Feadog fits entirerly within the Chieftain baring a very small band around the plastic mouth moulding. Hope this may be of interest, Regards Chris D
- RoberTunes
- Posts: 326
- Joined: Tue Oct 01, 2019 3:33 pm
- antispam: No
- Please enter the next number in sequence: 8
- Tell us something.: I am a flute, guitar, keyboard + whistle player learning about quality whistles, musical possibilities and playing techniques. I've recorded a CD of my own music and am creating music for kids.
- Location: North America
Re: Wide-body D for beginner?
Another option is to buy a whistle in the key of A, which is the next general increase in bore size, the altos (keys of A, G, F), and A whistles play the key of D too. And improvising a cushioned thumb rest?
One step further is to use the double-thumb three-season mountain whistle technique as demonstrated in this video, which negates issues with tube curvature altogether:
https://www.youtube.com/watch?v=Oe38tMJrQ3U
One step further is to use the double-thumb three-season mountain whistle technique as demonstrated in this video, which negates issues with tube curvature altogether:
https://www.youtube.com/watch?v=Oe38tMJrQ3U
-
- Posts: 1419
- Joined: Sun Dec 05, 2010 2:59 pm
- antispam: No
- Please enter the next number in sequence: 10
- Location: Southwestern Ontario
Re: Wide-body D for beginner?
Sounds like a strong case for one of Sedi's square-bore whistles: viewtopic.php?f=1&t=109443.
- Sedi
- Posts: 993
- Joined: Sun May 01, 2016 6:54 am
- antispam: No
- Please enter the next number in sequence: 8
- Tell us something.: Practice, practice, practice. You're never too old to learn.
Keep on fluting.
---u---o-o-o--o-o-o--
-----------------------
Re: Wide-body D for beginner?
Unfortunately I never really went into production. Covid made shipping prohibitively expensive and my day job has me swamped with work. But I still improve them and might have another go once shipping is back to normal and I find the time.
-
- Posts: 14
- Joined: Sat Aug 29, 2020 12:31 pm
- antispam: No
- Please enter the next number in sequence: 8
- Tell us something.: New whistle player looking to upgrade from a mass-produced whistle to something intermediate. Apparently that didn't equal 100 characters or more, but I have little to add other than that I am currently playing a Clarke original, Freeman tweak.
Re: Wide-body D for beginner?
That is so cool! If you do go into production I would definitely be interested. Alternately, if you are interested in selling a copy of your plans for a DIY, I would also be interested. I am an amateur jeweler, so I have all of the tools I would need for such a project.
- Sedi
- Posts: 993
- Joined: Sun May 01, 2016 6:54 am
- antispam: No
- Please enter the next number in sequence: 8
- Tell us something.: Practice, practice, practice. You're never too old to learn.
Keep on fluting.
---u---o-o-o--o-o-o--
-----------------------
Re: Wide-body D for beginner?
Sure thing. There's no copyright on a whistle. I use a simple app called "DIY flute" from Google play. You just need to calculate the square profile into a round one. The tube I use has an inner profile of 13x13 mm. And there are many tutorials on how to build a whistle.
-
- Posts: 14
- Joined: Sat Aug 29, 2020 12:31 pm
- antispam: No
- Please enter the next number in sequence: 8
- Tell us something.: New whistle player looking to upgrade from a mass-produced whistle to something intermediate. Apparently that didn't equal 100 characters or more, but I have little to add other than that I am currently playing a Clarke original, Freeman tweak.
Re: Wide-body D for beginner?
Assuming that I can find the same sized hollow stock, are you willing to share your calculations? I am pretty bad at geometry and don't use the Google Play store.
- Sedi
- Posts: 993
- Joined: Sun May 01, 2016 6:54 am
- antispam: No
- Please enter the next number in sequence: 8
- Tell us something.: Practice, practice, practice. You're never too old to learn.
Keep on fluting.
---u---o-o-o--o-o-o--
-----------------------
Re: Wide-body D for beginner?
Ehm, sorry but I cannot explain how to make a good whistle in like a couple of sentences. I've been doing that for 5 years and it took me a half year and more than 20 prototypes to perfect the square whistle. So you would have to learn the necessary skills and make yourself familiar with some tools like a "flutomat" software to calculate hole-size and other measurements. It would be all but useless if I gave you some calculations if I don't even know what type of material (wall thickness, diameter, etc) you'd be working with. Every millimeter difference would make new calculations necessary. So I guess your best bet is to buy a Susato with a thumb rest. It's not like I have some "secrets" I don't wanna share but it takes time and effort to come up with a good, in-tune whistle. There is more than enough material online on how to make whistles. And there is no geometry needed to come from 12x12 mm to a round diameter. The formula for the area of a circle is r^2 times "pi". And 2 times r is the diameter you need for any flutomat software. So I use tubing with 14 x 14. Inner diameter 12 x 12 (not 13 as stated above, my bad -- wall thickness is 1 mm)
12 x 12 = 144
144/pi = 45.8366236
square root of 45.8366236 is 6.770275 -- take it times 2 and you get the inner diameter of a round tube which you can then put into a flutomat software to calculate the hole sizes and spread of the holes. 13.54055 mm is the number you'll get. This is the formula you need when using a flutomat software with a square tube. Basically just translating the square profile into a round one.
12 x 12 = 144
144/pi = 45.8366236
square root of 45.8366236 is 6.770275 -- take it times 2 and you get the inner diameter of a round tube which you can then put into a flutomat software to calculate the hole sizes and spread of the holes. 13.54055 mm is the number you'll get. This is the formula you need when using a flutomat software with a square tube. Basically just translating the square profile into a round one.