It is currently Mon Nov 23, 2020 2:11 pm

All times are UTC - 6 hours




Post new topic Reply to topic  [ 6 posts ] 
Author Message
 
PostPosted: Thu Oct 08, 2020 12:33 pm 
Offline

Joined: Mon Dec 30, 2019 11:23 am
Posts: 51
My low D whistles started clogging constantly several days ago. It had been pretty cold in my music room, low sixties somewhere. I turned on the heat today and set it at sixty eight. The clogging problem went away. My MK low D doesn’t clog very often, but before I turned up the heat I couldn’t make it through a tune. Is this common with others?


Top
 Profile  
Reply with quote  
 
PostPosted: Thu Oct 08, 2020 12:53 pm 
Offline
User avatar

Joined: Mon Jul 10, 2006 7:25 am
Posts: 4792
Location: WV to the OC
Here that's about as cold as it gets, in the 60s.

Maybe that's why I never had clogging issues with MKs, Burkes, or Susatos, which all have curved windways.

What I did have constant clogging problems with were Overtons, with large flat parallel narrow windways. People would say all you needed to do to keep them from clogging was "warm them up" but the whistles still clogged when they were over 100 degrees.

I remember leaving an Overton Low D in the car on a 100+ degree day, the whistle at first was too hot to hold. When it cooled down enough to not burn my lips I played it, and it clogged in a few seconds. So much for the "warm it up" theory.

What I had to do was the toothpaste & dish detergent method, which has worked very well.

_________________
Richard Cook
1978 Quinn uilleann pipes
1945 Starck Highland pipes
Goldie Low D whistle


Top
 Profile  
Reply with quote  
 
PostPosted: Thu Oct 08, 2020 5:25 pm 
Offline

Joined: Mon Dec 30, 2019 11:23 am
Posts: 51
Richard, I want to order a Goldie low D sometime, but the clogging issue makes me hesitant now that I have a good idea of what I want (softer blower). i’m perfectly happy with the MK, but I have never played a Goldie or Overton.


Top
 Profile  
Reply with quote  
 
PostPosted: Fri Oct 09, 2020 12:00 pm 
Offline

Joined: Mon Jul 30, 2018 9:42 am
Posts: 76
It's amazing how much a little difference in windway height affects clogging. My Goldie mezzo A is a medium to medium-hard blower and regularly clogs unless I use sodium lauryl sulfate and clean out the windway every few weeks. The Overton low D and high D have never once clogged. The Low D is a medium-soft blower and the high D is a medium blower. I've never had any other whistle clog but the Goldie A. Still worth it, though for the ridiculously beautiful tone!

-Peter


Top
 Profile  
Reply with quote  
 
PostPosted: Sat Oct 10, 2020 2:46 am 
Offline

Joined: Mon Aug 14, 2017 5:47 am
Posts: 976
Location: Surrey/Hants border, England
Most blown instruments behave best at body temperature, we blow through our whistles/flutes to help bring them up to temperature.
If we play a cold instrument, our breath condenses on the cold surfaces, & can so easily cause tonal/clogging problems.

_________________
Keith.
Trying to do justice to my various musical instruments.


Top
 Profile  
Reply with quote  
 
PostPosted: Sat Oct 10, 2020 8:04 am 
Offline

Joined: Mon Dec 30, 2019 11:23 am
Posts: 51
I sit by the window when I play and it could easily be as low as 60F there, before I turned on the heat. At that temp an Al whistle is going to cool off rapidly. The problem is much better with the heat on. Nice to hear that a soft blowing Goldie is more resistant to clogging than a medium or hard blower. I currently have just my MK Pro low D and Killarney D. I sold the rest even though one was right there for my favorite low D, along with the MK. I’m going to inquire about adding Goldie low D soon.


Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 

All times are UTC - 6 hours


Who is online

Users browsing this forum: No registered users and 30 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group
[ Time : 0.252s | 14 Queries | GZIP : On ]
(dh)