Chiff and Fipple Forums
http://forums.chiffandfipple.com/

Manufacturers that make all metal one piece high whistles
http://forums.chiffandfipple.com/viewtopic.php?f=1&t=109741
Page 1 of 1

Author:  Dreday [ Sun Dec 15, 2019 2:08 am ]
Post subject:  Manufacturers that make all metal one piece high whistles

Hello I’m curious to know all the manufacturers that make all metal whistles including the plug. The chieftain thunderbird high D is not being made anymore. Are there any other manufacturers that produce a high d whistle that’s non tunable and made out of all metal of brass or aluminum?

Author:  vigaglum [ Sun Dec 15, 2019 7:05 am ]
Post subject:  Re: Manufacturers that make all metal one piece high whistle

Mack Hoover does. Impempe used to.

Author:  Dreday [ Sun Dec 15, 2019 4:34 pm ]
Post subject:  Re: Manufacturers that make all metal one piece high whistle

It appears that the Hoover website is no longer available..

Author:  RoberTunes [ Sun Dec 15, 2019 4:50 pm ]
Post subject:  Re: Manufacturers that make all metal one piece high whistle

There are some that are all metal except for the fipple plug (like Alba), and variations close to that (Burke, Anak, many more).
1) the Skellig low whistle is all aluminum (but is tunable). Ask Nick for a non-tunable High D Skellig, or an improv model high D. He's a creative genius. Website > https://www.theirishwhistle.com/models
2) can't find one since the Chieftain high D Thunderbird was stopped > search online for used ones, and email Phil Hardy at Kerry Whistles to tell him you'll buy one if he's got an old one somewhere, even if it's scratched and the dog plays with it. https://kerrywhistles.com/
3) Carbony is an option you might consider if you're trying to get away from the tone from brass, plastic and delrin.
4) I went to the website of Goldie but none of the photos show the fipple plug. All aluminum otherwise, including mouthpiece.

This makes me wonder if the tone of a whistle could be altered to any considerable degree by covering a plastic fipple plug within the tube area, with a sheet of aluminum foil. Or some such process. If it's far more convenient to use plastic as a fipple plug material, then if the sound is made too different, remetalize the surface of the fipple plug after it's installed. Always a workaround.

Author:  Dreday [ Sun Dec 15, 2019 6:07 pm ]
Post subject:  Re: Manufacturers that make all metal one piece high whistle

I actually have Alex DeWilde from Hermit Hill whistles making me a high E Whistle.. all brass with a brass plug and mouth piece with Celtic engraving! His plugs are usually Derlin and mouthpiece is usually derlin, but I asked him to make the mouthpiece and the plug in brass and he’s only charging me $10 more for the brass plug! it’s a two piece but his design allows to use different keys. So after I get the E, I’m going order probably a D & C bottom part that can be used with my head piece.

Author:  Dreday [ Sun Dec 15, 2019 6:14 pm ]
Post subject:  Re: Manufacturers that make all metal one piece high whistle

I actually have 2 Kerry High D one piece whistles already. One I keep with me at all times, and the other I keep stored in mint condition. I also have his C, Bb (tunable), A, G, F, and 3 low D’s. (Thunderbird, V5, and Custom) all one pieces except for the Bb and the Custom.

Author:  vigaglum [ Mon Dec 16, 2019 4:18 am ]
Post subject:  Re: Manufacturers that make all metal one piece high whistle

Dreday wrote:
It appears that the Hoover website is no longer available..


Hmm. It was up couple of days ago. In any case, the website doesn't do much except list some products and give his e-mail address, which you contact for enquiries or purchases, and is hoover(dot)mc(at)gmail(dot)com

I think Shearwater do an all-metal soprano in a few keys, but I don't know if the fipple plug is metal.

Author:  Dreday [ Mon Dec 16, 2019 5:48 am ]
Post subject:  Re: Manufacturers that make all metal one piece high whistle

I emailed Mack Hoover and responded telling me he is still making whistles! He told me his website disappeared.. so if anyone is interested in his whistles, I would shoot him an email.

Author:  Dreday [ Mon Dec 16, 2019 1:25 pm ]
Post subject:  Re: Manufacturers that make all metal one piece high whistle

Mack Hoover is making me a brass high D whistle!! I’m excited to get it and he said I should have it before Christmas!

I’m intrigued to hear the difference in tone and playability then my Kerry.

Author:  Mack.Hoover [ Tue Dec 17, 2019 12:25 pm ]
Post subject:  Re: Manufacturers that make all metal one piece high whistle

I guess it's fair to weigh in here. Yes I still make whistles one at a time to accommodate individual preferences which we discuss via email.

My website disappeared because it was connected with the PWA message board which has expired (hopefully to be reopened soon).

I have a new website in the works which will be published at a different address. Meanwhile if you are interested in a Hoover (Mack) whistle send me a PM.

Mack

Author:  RoberTunes [ Sun Dec 29, 2019 9:26 pm ]
Post subject:  Re: Manufacturers that make all metal one piece high whistle

Setanta offers an all-metal soprano D whistle.
http://www.setanta-whistles.com/store/p ... igh_D.html

Page 1 of 1 All times are UTC - 6 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/