Re: Features liked for whistle storage
Posted: Sat Sep 29, 2018 10:36 am
After reading several comments about ventilation, I’m taking that to heart. I do run a recorder swab up the barrel when I’m done, but obviously not into the mouthpiece area, that just has to dry on it’s own. Moldy mouthpiece, yuck.
https://www.amazon.com/MEEDEN-Brushes-Z ... ?pldnSite=
I’m tentatively looking at this case, though it’s a couple inches longer than needed, but has some really good ventilation. I posted a question asking about the diameter the slots will accommodate, because I can’t see a purpose for it if it doesn’t work, I’m not a painter. I’d rather not have to bother with sending it back.
I’m assuming as it’s 5.2 inches wide closed, each slot is about an inch across, and also seems to pooch out, they aren’t flat, so it might work and be a decent travel case for about five whistles, if you put three in every other slot on one side, and two on the other, spaced to fit the spaces between the other three, if that makes any sense.
Anyhow, anyone interested, take a look and see if you think it’s got good possibilities.
Lisa
https://www.amazon.com/MEEDEN-Brushes-Z ... ?pldnSite=
I’m tentatively looking at this case, though it’s a couple inches longer than needed, but has some really good ventilation. I posted a question asking about the diameter the slots will accommodate, because I can’t see a purpose for it if it doesn’t work, I’m not a painter. I’d rather not have to bother with sending it back.
I’m assuming as it’s 5.2 inches wide closed, each slot is about an inch across, and also seems to pooch out, they aren’t flat, so it might work and be a decent travel case for about five whistles, if you put three in every other slot on one side, and two on the other, spaced to fit the spaces between the other three, if that makes any sense.
Anyhow, anyone interested, take a look and see if you think it’s got good possibilities.
Lisa