3D Printed whistles

The Ultimate On-Line Whistle Community. If you find one more ultimater, let us know.
User avatar
Mr.Gumby
Posts: 6603
Joined: Mon Jun 07, 2010 11:31 am
antispam: No
Please enter the next number in sequence: 8
Location: the Back of Beyond

3D Printed whistles

Post by Mr.Gumby »

Another thread led me to an ebay listing, the listing linked to a whistlemaker's website and eventually to a series of three articles on their process of design and making of 3D printed whistles. I posted the following comment on the other thread but maybe this deserves a thread all of its own, rather than being buried on a for sale thread.

The descriptions are clear and free of hype, best I have seen so far on the subject. You may need a translator.
Mr.Gumby wrote:The whistle is no longer available and ebay suggested a deQuelery whislte instead. That listing, in turn, linked on to their 3D printed (and other) whistles and a page that gives a well thought through description of their design process. Best descriptive treatment of 3D printed whistle making I have come across so far : here (or see their blog). And no faffing about or hyperbole about the process or the results either, no world peace promised or extraordinary claims made, which is rather refreshing. It's in Dutch so that may be prohibitive for some readers.
My brain hurts

Image
User avatar
ytliek
Posts: 2739
Joined: Mon Feb 06, 2012 3:51 pm
antispam: No
Please enter the next number in sequence: 10
Location: Seashore

Re: 3D Printed whistles

Post by ytliek »

I've seen deQuelerij posts on Facebook. The whistles look interesting.
Tunborough
Posts: 1419
Joined: Sun Dec 05, 2010 2:59 pm
antispam: No
Please enter the next number in sequence: 10
Location: Southwestern Ontario

Re: 3D Printed whistles

Post by Tunborough »

User avatar
whistlecollector
Posts: 493
Joined: Mon Jan 13, 2014 3:29 pm
antispam: No
Please enter the next number in sequence: 8
Location: Somewhere between Here and There.

Re: 3D Printed whistles

Post by whistlecollector »

There is also a link to Dequelery in the WMD (along with several other recent makers).

(Or there would be if the WMD were updated!) :poke:
-- A tin whistle a day keeps the racketts at bay.

-- WhOAD Survivor No. 11373
User avatar
Mr.Gumby
Posts: 6603
Joined: Mon Jun 07, 2010 11:31 am
antispam: No
Please enter the next number in sequence: 8
Location: the Back of Beyond

Re: 3D Printed whistles

Post by Mr.Gumby »

There is also a link to Dequelery in the WMD
My interest is more with their description of their process of design, making and finishing the printed parts than with the whistles themselves, to be honest.

One thing the process description shows is that 3D printing is not the magic bullet it is sometimes made out to be. The printing of one head takes them about seven hours to begin with. Then each whistle head receives at least 30 minutes of hand finishing and adjusting to make it playable and finished to an acceptable production standard. No churning out of stacks of easily affordable whistles for the masses there.

Their 'standard' and 'artist' ranges have printed heads. And they do look good, although I don't particularly fancy the alu tubes and the engraving and all that.
(Or there would be if the WMD were updated!)
The WMD is dead in the water at this stage, these things only work when maintained.
Thanks, I didn't spot that. But perhaps I didn't look hard enough. The link I followed sent me to the Dutch version of the articles, which will do me but perhaps not many others. A brief look didn't immediately lead me to English versions.
My brain hurts

Image
PB+J
Posts: 1306
Joined: Sun Mar 25, 2018 5:40 am
antispam: No
Please enter the next number in sequence: 8
Tell us something.: I'm a historian and the author of "The Beat Cop:Chicago's Chief O'Neill and the Creation of Irish Music," published by the University of Chicago in 2022. I live in Arlington VA and play the flute sincerely but not well

Re: 3D Printed whistles

Post by PB+J »

I recently got a parks whistle that clearly had a 3d printed head and I think a 3d printed "tone ring.

the head/mouthpiece was roughly finished and dimpled in that way of 3d printed objects. It was unpleasant to play and looked unfinished. i had to spend some time cleaning it up with fine sandpaper. The "tone ring" is a clever idea but it also seems to have been 3d printed and it was too loose. I had to tie a string around it, soak it in hot water, then cool it in cold water to get it to have enough tension to stay in place.

I was not impressed. The whistle is loud and does play evenly and well now, and it wasn't a ton of work, and it's true that in Mr. Parks defense when I ordered i asked how quickly it would be shipped, because I needed it for an upcoming trip. So perhaps he rushed it out the shop door.
Tommy
Posts: 2951
Joined: Tue Feb 22, 2005 2:39 pm
antispam: No
Location: Yes

Re: 3D Printed whistles

Post by Tommy »

Mr.Gumby wrote:
My interest is more with their description of their process of design, making and finishing the printed parts than with the whistles themselves, to be honest.

One thing the process description shows is that 3D printing is not the magic bullet it is sometimes made out to be. The printing of one head takes them about seven hours to begin with. Then each whistle head receives at least 30 minutes of hand finishing and adjusting to make it playable and finished to an acceptable production standard. No churning out of stacks of easily affordable whistles for the masses there.
Thank you for the link Mr Gumby. It is interesting. :thumbsup:
''Whistles of Wood'', cpvc and brass. viewtopic.php?f=1&t=69086
The Lurking Fear
Posts: 72
Joined: Thu Dec 12, 2013 5:12 pm
antispam: No
Please enter the next number in sequence: 8

Re: 3D Printed whistles

Post by The Lurking Fear »

PB+J wrote:I recently got a parks whistle that clearly had a 3d printed head and I think a 3d printed "tone ring.

the head/mouthpiece was roughly finished and dimpled in that way of 3d printed objects. It was unpleasant to play and looked unfinished. i had to spend some time cleaning it up with fine sandpaper. The "tone ring" is a clever idea but it also seems to have been 3d printed and it was too loose. I had to tie a string around it, soak it in hot water, then cool it in cold water to get it to have enough tension to stay in place.

I was not impressed. The whistle is loud and does play evenly and well now, and it wasn't a ton of work, and it's true that in Mr. Parks defense when I ordered i asked how quickly it would be shipped, because I needed it for an upcoming trip. So perhaps he rushed it out the shop door.
Tried to find anything on Carey's site about utilizing 3d printing- no luck but could have missed it.

Somewhat doubtful the tone ring would be 3d printed-why bother?It's just a ring with a section removed,would think bothering with printing would be cost prohibitive at this time.But who knows?

He usually has stock on hand to ship.I've got several and all been fine.If yours was sub par as you describe I'd contact him.Seems out of the ordinary.
PB+J
Posts: 1306
Joined: Sun Mar 25, 2018 5:40 am
antispam: No
Please enter the next number in sequence: 8
Tell us something.: I'm a historian and the author of "The Beat Cop:Chicago's Chief O'Neill and the Creation of Irish Music," published by the University of Chicago in 2022. I live in Arlington VA and play the flute sincerely but not well

Re: 3D Printed whistles

Post by PB+J »

The Lurking Fear wrote:
PB+J wrote:I recently got a parks whistle that clearly had a 3d printed head and I think a 3d printed "tone ring.

the head/mouthpiece was roughly finished and dimpled in that way of 3d printed objects. It was unpleasant to play and looked unfinished. i had to spend some time cleaning it up with fine sandpaper. The "tone ring" is a clever idea but it also seems to have been 3d printed and it was too loose. I had to tie a string around it, soak it in hot water, then cool it in cold water to get it to have enough tension to stay in place.

I was not impressed. The whistle is loud and does play evenly and well now, and it wasn't a ton of work, and it's true that in Mr. Parks defense when I ordered i asked how quickly it would be shipped, because I needed it for an upcoming trip. So perhaps he rushed it out the shop door.
Tried to find anything on Carey's site about utilizing 3d printing- no luck but could have missed it.

Somewhat doubtful the tone ring would be 3d printed-why bother?It's just a ring with a section removed,would think bothering with printing would be cost prohibitive at this time.But who knows?

He usually has stock on hand to ship.I've got several and all been fine.If yours was sub par as you describe I'd contact him.Seems out of the ordinary.

Yeah I agree, it did not make sense to me, but it looks unmistakably like 3d printing, and very different from the rest of the whistle, which is straight-up black pvc. And the ring responded to heat in a way unlike PVC.

See the pictures below? the stippling on the ring? Even though it's a blurry iphone photo you can see what I mean. That's what the whole mouthpiece looked like. The matte finish shows where I sanded it and you can still see a bit of the stippling

Image
Image
User avatar
whistlecollector
Posts: 493
Joined: Mon Jan 13, 2014 3:29 pm
antispam: No
Please enter the next number in sequence: 8
Location: Somewhere between Here and There.

Re: 3D Printed whistles

Post by whistlecollector »

Mr.Gumby wrote:One thing the process description shows is that 3D printing is not the magic bullet it is sometimes made out to be. The printing of one head takes them about seven hours to begin with. Then each whistle head receives at least 30 minutes of hand finishing and adjusting to make it playable and finished to an acceptable production standard. No churning out of stacks of easily affordable whistles for the masses there.

Their 'standard' and 'artist' ranges have printed heads. And they do look good, although I don't particularly fancy the alu tubes and the engraving and all that.
Interesting. Doesn't seem to be quite cost effective for a very inexpensive whistle, or one that can compete numberwise with the likes of Generation.
(Or there would be if the WMD were updated!)
The WMD is dead in the water at this stage, these things only work when maintained.
That's sad. It is a fine resource! Maybe someone else can take it over?
-- A tin whistle a day keeps the racketts at bay.

-- WhOAD Survivor No. 11373
Kade1301
Posts: 167
Joined: Fri Mar 02, 2018 4:44 am
antispam: No
Please enter the next number in sequence: 8
Tell us something.: I've been trying to learn the recorder for about 5 years now and want to add a new instrument (tin whistle) to my repertoire. I hope with only 6 holes life will be a bit easier... (John Sheahan's Marino Casino in the Gaiety theatre has something to do with it - whereas my head knows that 40 years of practice is the reason why it sounds so good, I'm still hoping...)
Location: France
Contact:

Re: 3D Printed whistles

Post by Kade1301 »

whistlecollector wrote:
Mr.Gumby wrote:One thing the process description shows is that 3D printing is not the magic bullet it is sometimes made out to be. The printing of one head takes them about seven hours to begin with. Then each whistle head receives at least 30 minutes of hand finishing and adjusting to make it playable and finished to an acceptable production standard. No churning out of stacks of easily affordable whistles for the masses there.

Their 'standard' and 'artist' ranges have printed heads. And they do look good, although I don't particularly fancy the alu tubes and the engraving and all that.
Interesting. Doesn't seem to be quite cost effective for a very inexpensive whistle, or one that can compete numberwise with the likes of Generation.
.....
Have you had a look at the prices on the website Mr. Gumby linked to? VERY far away from Generation & Co...
User avatar
Mr.Gumby
Posts: 6603
Joined: Mon Jun 07, 2010 11:31 am
antispam: No
Please enter the next number in sequence: 8
Location: the Back of Beyond

Re: 3D Printed whistles

Post by Mr.Gumby »

Have you had a look at the prices on the website Mr. Gumby linked to? VERY far away from Generation & Co...
I think W. is acknowledging that. As I said above : 3D printing is not the magic bullet, interesting as a development as it is. We're not about to find sturdy children playing printed whistles at every crossroads yet.
My brain hurts

Image
The Lurking Fear
Posts: 72
Joined: Thu Dec 12, 2013 5:12 pm
antispam: No
Please enter the next number in sequence: 8

Re: 3D Printed whistles

Post by The Lurking Fear »

PB+J wrote: Yeah I agree, it did not make sense to me, but it looks unmistakably like 3d printing, and very different from the rest of the whistle, which is straight-up black pvc. And the ring responded to heat in a way unlike PVC.

See the pictures below? the stippling on the ring? Even though it's a blurry iphone photo you can see what I mean. That's what the whole mouthpiece looked like. The matte finish shows where I sanded it and you can still see a bit of the stippling
Whoa! See what you mean. Never seen anything like that from him before although it's probably been 3-4 years since I ordered anything. That pin in the back is new to me,also.
User avatar
whistlecollector
Posts: 493
Joined: Mon Jan 13, 2014 3:29 pm
antispam: No
Please enter the next number in sequence: 8
Location: Somewhere between Here and There.

Re: 3D Printed whistles

Post by whistlecollector »

Kade1301 wrote:Have you had a look at the prices on the website Mr. Gumby linked to? VERY far away from Generation & Co...
Well, exactly! Mr. Gumby is correct. I think we're all on the same page here: 3D printing is neat, but if a whistle head requires 7 hours of print time plus another hour or so of finishing, tuning, testing and messing about, you can hardly compete with Generation to make an inexpensive whistle and to make them in quantity!

Also economics of scale: unless you have access to a lot of 3D printers, I'm guessing a whistlesmith can't make very many 3D printed whistles!
-- A tin whistle a day keeps the racketts at bay.

-- WhOAD Survivor No. 11373
User avatar
Mr.Gumby
Posts: 6603
Joined: Mon Jun 07, 2010 11:31 am
antispam: No
Please enter the next number in sequence: 8
Location: the Back of Beyond

Re: 3D Printed whistles

Post by Mr.Gumby »

Bringing this one up again as another article has been posted, dealing with how t oget the design of the whistlehead to a printable state. Interesting stuff but, for now, as far as I can tell, lacking an English translation : part IV
My brain hurts

Image
Post Reply