It is currently Sun May 28, 2017 6:26 am

All times are UTC - 6 hours




Post new topic Reply to topic  [ 17 posts ]  Go to page Previous  1, 2
Author Message
 
PostPosted: Tue Apr 25, 2017 6:39 am 
Offline
User avatar

Joined: Wed Jun 27, 2001 6:00 pm
Posts: 7169
Location: Clifton Park, NY
Loren wrote:
Bore the inner diameter first, while the material is thick enough to resist flexing, don't over tighten the chuck or collet, and don't take big cuts.

Then, mount the piece on a mandrel to turn down the exterior to spec.

"Hairy when abraded", what exactly are you doing and how, when this occurs?


Exactly.
OP-- how are you turning your polymer? A machine lathe as opposed to a wood lathe I'd imagine.
I've found that Delrin or Acetal turns best with a very sharp lathe tool and taking very small cuts, especially as you approach the final outside diameter. It's definitely tricky stuff, but it makes a terrific whistle.
These polymers don't respond well to sanding, which is what I think you mean by "hairy". The sandpaper pulls up very tiny threads of the stuff but they don't fly off, remaining attached to the piece. You can sand it WET using automotive wet/dry sandpaper in the 400 grit and up. Keep it very wet. If anyone knows a good way to buff it, post it here.

_________________
Got wood?
http://www.Busmanwhistles.com
Let me custom make one for you!


Top
 Profile  
Reply with quote  
 
PostPosted: Tue Apr 25, 2017 7:55 am 
Offline
User avatar

Joined: Fri Jan 27, 2012 10:15 pm
Posts: 506
Location: Minneapolis-St. Paul
Wet sanding - thanks Paul. I'll try that on some of our old models. A friend tipped me off to a couple other websites:

https://www.cuestik.com/store/?DEPARTMENT_ID=106 - has Phenolic in nice colors

and

https://www.webbwood.com/qshop.php?PH/dowel

The blue and red colors at Webb wood might be nice for a generation-inspired mouthpiece.


Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 17 posts ]  Go to page Previous  1, 2

All times are UTC - 6 hours


Who is online

Users browsing this forum: Google and 7 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group
[ Time : 0.072s | 16 Queries | GZIP : On ]
(dh)