It is currently Wed Jun 26, 2019 8:08 pm

All times are UTC - 6 hours




Post new topic Reply to topic  [ 26 posts ]  Go to page Previous  1, 2
Author Message
 
PostPosted: Tue May 16, 2017 12:23 pm 
Offline

Joined: Thu Nov 17, 2011 11:46 am
Posts: 39
BTW, to see what's possible, you might pull up http://www.geocities.ws/parkhurstwhistles/whistles.htm. It's an old site but it seems to work for me.

It's not voodoo, you just have to be patient and have about 20' of copper kitchen pipe to destroy.


Top
 Profile  
Reply with quote  
 
PostPosted: Tue May 16, 2017 7:22 pm 
Offline

Joined: Tue Feb 22, 2005 2:39 pm
Posts: 2883
Location: Yes
David Parkhurst wrote:
I've worked with copper a bit :D . It's fairly soft, easy to turn on a machine lathe as long as your tools are sharp.

David Parkhurst


Sharp tools is worth repeating for any material on a lathe.

_________________
''Whistles of Wood'', cpvc and brass. viewtopic.php?f=1&t=69086


Top
 Profile  
Reply with quote  
 
PostPosted: Sat May 20, 2017 7:02 pm 
Offline

Joined: Fri May 19, 2017 8:04 pm
Posts: 3
AngelicBeaver wrote:
Does anyone have experience with copper whistles? For the longest time, I've thought a copper whistle in the style of a Chieftain V3 would be pretty sweet looking, although a copper low D would be pretty heavy.

How would copper work as something you put your mouth on or handle frequently? Would it require a coating of some sort? Ideally, a bright copper finish or a green patina would be used, or perhaps a combination of both.

Besides the weight, I'd be concerned about corrosion on the inside or what might happen with frequent skin contact, like blackened lips or fingers.


I have made a number of copper penny whistles.
I use nylon rod for the fipple block
I have a number of photos of the build process however cant work out how to upload photo to this site yet.
I have had some success in decorating my whistles via etching the copper with HCl and Hydrogen peroxide solution. I transfer designs onto the copper by firs printing the design on my laser printer and then using a very hot household iron to fuse the laser printer "ink" onto the copper. I submerge the copper into the HCl peroxide mix for a number of hours.


Top
 Profile  
Reply with quote  
 
PostPosted: Sun May 21, 2017 2:50 am 
Offline

Joined: Fri May 19, 2017 8:04 pm
Posts: 3
AngelicBeaver wrote:
Does anyone have experience with copper whistles? For the longest time, I've thought a copper whistle in the style of a Chieftain V3 would be pretty sweet looking, although a copper low D would be pretty heavy.

How would copper work as something you put your mouth on or handle frequently? Would it require a coating of some sort? Ideally, a bright copper finish or a green patina would be used, or perhaps a combination of both.

Besides the weight, I'd be concerned about corrosion on the inside or what might happen with frequent skin contact, like blackened lips or fingers.


I have added a few photos here
https://au.pinterest.com/davidmcclee030 ... le-design/
Image


Top
 Profile  
Reply with quote  
 
PostPosted: Sun May 21, 2017 3:18 am 
Offline
Moderator
User avatar

Joined: Wed Jan 14, 2009 5:21 pm
Posts: 12269
Location: Unimportant island off the great mainland of Europe
Image

For posting images, David, try clicking "Quote" on this post of mine and have a look at what I did. Essentially, there are three steps - put the images on a hosting site (you've done that), make them publicly available (you've done that) and then get the picture up on the site and paste the URL of the image file within the tags here.

So actually, you were only one very small step short of posting the images yourself. :)

_________________
"Only connect!"

https://youtu.be/ezbWVysJAOY
https://tapm.bandcamp.com/


Top
 Profile  
Reply with quote  
 
PostPosted: Mon May 22, 2017 5:14 am 
Offline

Joined: Fri May 19, 2017 8:04 pm
Posts: 3
benhall.1 wrote:
Image

For posting images, David, try clicking "Quote" on this post of mine and have a look at what I did. Essentially, there are three steps - put the images on a hosting site (you've done that), make them publicly available (you've done that) and then get the picture up on the site and paste the URL of the image file within the tags here.

So actually, you were only one very small step short of posting the images yourself. :)


Thanks for the advice :thumbsup:


Top
 Profile  
Reply with quote  
 
PostPosted: Thu Jun 06, 2019 4:04 pm 
Offline

Joined: Thu Jun 06, 2019 9:33 am
Posts: 1
[Thread revival. - Mod]

In 2013 or 2014, I bought a copper high D whistle from a guy in Canada who was make whistle part time. Saw the Ad on Ebay and bought one for $60.

When I received it, I felt it was worth more than $200. The workmanship was very good and the sound superb!!! Very clear and no dull note.

The copper has multi-shades and it has a lacquer. Up to now I still have it and consider it as a prize possession. I tried to contact seller 2 years ago but he never responded.

As far as the sound, very nice and the weight is a little heavy but it's all worth it!!!

It also depends on the maker.

I'm very happy!!! :pint:


Top
 Profile  
Reply with quote  
 
PostPosted: Fri Jun 07, 2019 6:42 am 
Offline

Joined: Mon Jul 27, 2015 10:10 am
Posts: 262
Location: Middle of Virginia
I wish you could post a picture of your copper whistle. Really curious what it looks like.


Top
 Profile  
Reply with quote  
 
PostPosted: Fri Jun 07, 2019 8:40 am 
Offline
User avatar

Joined: Mon Feb 06, 2012 3:51 pm
Posts: 2514
Location: Seashore
Mashico1 wrote:
[Thread revival. - Mod]In 2013 or 2014, I bought a copper high D whistle from a guy in Canada who was make whistle part time. Saw the Ad on Ebay and bought one for $60.

I remember Airgead Realta from Alaska offering copper whistles.

viewtopic.php?f=1&t=91601&p=1099004#p1099004


Top
 Profile  
Reply with quote  
 
PostPosted: Sat Jun 08, 2019 4:47 pm 
Offline

Joined: Wed Mar 05, 2008 11:39 am
Posts: 261
Mashico1 wrote:
[Thread revival. - Mod]

Mashico1 wrote:
In 2013 or 2014, I bought a copper high D whistle from a guy in Canada who was make whistle part time. Saw the Ad on Ebay and bought one for $60.


That sounds like David O'Brien.

_________________
In Cape Breton, Nova Scotia


Top
 Profile  
Reply with quote  
 
PostPosted: Sun Jun 09, 2019 10:40 am 
Offline
User avatar

Joined: Mon Feb 06, 2012 3:51 pm
Posts: 2514
Location: Seashore
Adrian W. wrote:
Mashico1 wrote:
[Thread revival. - Mod]

Mashico1 wrote:
In 2013 or 2014, I bought a copper high D whistle from a guy in Canada who was make whistle part time. Saw the Ad on Ebay and bought one for $60.


That sounds like David O'Brien.

Not to me... it is not David. The thread above I referred to is by Curtis Dashner in Alaska.


Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 26 posts ]  Go to page Previous  1, 2

All times are UTC - 6 hours


Who is online

Users browsing this forum: whistlecollector and 10 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group
[ Time : 0.145s | 12 Queries | GZIP : On ]
(dh)