Search found 752 matches
- Sun Mar 10, 2024 2:41 pm
- Forum: Flute Forum
- Topic: Globulisation!
- Replies: 11
- Views: 999
Re: Globulisation!
I've seen and heard reports of makers who saturate their newly made flutes in none drying oils, and even some who have tried using vacuum infusion to force oil into the wood. I even thought about trying that myself at once stage, but then decided that it would probably be a bad idea because with shr...
- Sun Mar 10, 2024 2:28 pm
- Forum: Flute Forum
- Topic: Wood vs metal rings at flute joints
- Replies: 10
- Views: 724
Re: Wood vs metal rings at flute joints
Aside from aesthetic differences and manufacturing efficiencies, another advantage of carbon fiber reinforced wooden rings is that they are much lighter weight than metal rings.
- Fri Mar 08, 2024 7:22 pm
- Forum: Flute Forum
- Topic: Globulisation!
- Replies: 11
- Views: 999
Re: Globulisation!
I wonder if there is still moisture inside the wood. Your description seems to imply that the surface in the sun is heating up, causing moisture to try to evaporate, which pushes the oil out of the surface. I've seen this kind of thing before with insufficiently well seasoned wood, although most not...
- Thu Mar 07, 2024 12:43 pm
- Forum: Flute Forum
- Topic: Globulisation!
- Replies: 11
- Views: 999
Re: Globulisation!
Vacuum resin infusion using a product such as "Cactus Juice" from TurnTex completely solves this problem for a lot (not all) of woods that would otherwise make a sub-standard flute for the reasons outlined above. To do vacuum resin infusion, you start by seasoning the wood as normal, then ...
- Tue Feb 06, 2024 3:04 pm
- Forum: Flute Forum
- Topic: Anyone like the big round embouchure?
- Replies: 20
- Views: 3212
Re: Anyone like the big round embouchure?
RoberTunes, it seems to me that you are making two claims here (please correct me if I'm wrong): (a) that an embouchure cut with a blowing edge that runs parallel to the long axis of the flute is more efficient because it is perpendicular to the direction of air flow from the player's lips, and (b) ...
- Sat Jan 27, 2024 2:04 am
- Forum: Flute Forum
- Topic: Flute Crutch?
- Replies: 10
- Views: 1934
Re: Flute Crutch?
You might also find it helpful to look up the pipers grip which has different contact points and uses the hands in a different position compared to more conventional ways of holding the flute.
- Sat Jan 27, 2024 1:59 am
- Forum: Flute Forum
- Topic: Flattening the second octave
- Replies: 17
- Views: 2540
Re: Flattening the second octave
I was under the impression that you were only sharp in the second octave, and not the first. I don't think that is caused by a coverage issue, because covering more embouchure hole should flatten both first and second octave more or less equally. It may be worth experimenting with various levels of ...
- Thu Jan 25, 2024 10:25 pm
- Forum: The Chiff and Fipple Whistle Forum
- Topic: Frequency in a square tube
- Replies: 13
- Views: 2066
Re: Frequency in a square tube
I thought that what mattered was the cross-sectional area of each point in the bore, regardless of the shape. I'm inclined to agree that cross-sectional area matters. After all, bore-perturbations and tapered bores influence tuning. Some whistle makers seem to achieve their bore compression in the ...
- Thu Jan 25, 2024 10:12 pm
- Forum: Flute Forum
- Topic: Flattening the second octave
- Replies: 17
- Views: 2540
Re: Flattening the second octave
I’m not really sure if the jaw jutting out is what’s causing it to flatten (my guess is that it isn’t). Perhaps it’s making the octave switch easier, allowing me to blow lighter, bringing the note into tune. I think you are right. The tiny movement of the jaw helps to switch octaves, allowing you t...
- Thu Jan 25, 2024 1:16 am
- Forum: Flute Forum
- Topic: Flattening the second octave
- Replies: 17
- Views: 2540
Re: Flattening the second octave
You need to work on tightening up your embouchure, especially in the second octave. It is common for new players to have a fairly large, open, embouchure ... and here I'm talking about the gap between your lips, not the hole in the flute. This is not only inefficient in terms of air usage, but it al...
- Thu Jan 18, 2024 1:42 am
- Forum: The Chiff and Fipple Whistle Forum
- Topic: Frequency in a square tube
- Replies: 13
- Views: 2066
- Wed Jan 17, 2024 4:43 pm
- Forum: The Chiff and Fipple Whistle Forum
- Topic: Frequency in a square tube
- Replies: 13
- Views: 2066
Re: Frequency in a square tube
I thought that what mattered was the cross-sectional area of each point in the bore, regardless of the shape.
But I look forward to reading a post from someone who actually knows!
But I look forward to reading a post from someone who actually knows!
- Tue Jan 16, 2024 11:59 am
- Forum: Flute Forum
- Topic: A message from beyond the grave...
- Replies: 18
- Views: 2649
Re: A message from beyond the grave...
I generally use heat to separate stuck slides, and this can often give a clue as to what caused them to get stuck. Shellack and beeswax seem to be quite common culprits, and sometimes bore oil. It may well be the case that some tight-fitting slides end up seizing due to moisture and corrosion, but a...
- Tue Jan 16, 2024 4:13 am
- Forum: Flute Forum
- Topic: A message from beyond the grave...
- Replies: 18
- Views: 2649
Re: A message from beyond the grave...
All flutes get breath condensation, but many don't have stuck tuning slides. So I'd say it is unlikely that breath condensation is the main cause. There are lots of ways you can gum up a slide, and sometimes they even corrode together depending on the combination of materials involved. I've encounte...
- Thu Jan 11, 2024 3:37 am
- Forum: The Chiff and Fipple Whistle Forum
- Topic: Wood Whistle Makers
- Replies: 26
- Views: 2828
Re: Wood Whistle Makers
Most of the flutes I've profiled have flare that only extends to a point within the foot section. In other words, the minimum bore diameter is located within the foot section at a point that is somewhat closer to the socket than to the bottom end of the foot. I have no idea what is optimum, but I ha...