Search found 147 matches
- Sat Jun 10, 2017 6:59 pm
- Forum: Uilleann Pipe forum
- Topic: Bass bar to stock
- Replies: 9
- Views: 4714
Re: Bass bar to stock
Ok thank you for all the advice I am totally underwhelmed. My options then are, trial an error I will start with a 3mm hole working up in millimeters until I have an optimum air flow I can always plug a hole if it is too big and I will smear vaseline on the leather to assist in an airtight gasket. I...
- Mon Jun 05, 2017 5:39 pm
- Forum: Uilleann Pipe forum
- Topic: Tying in a new bag
- Replies: 2
- Views: 2755
Re: Tying in a new bag
Yeah I also wondered if there was a formula I would think girth would be a variable.Anyway there are a couple of good tips and measurements on "you tube" that I used. One thing that worked for me is to cut the 2 holes pick a method, there are a few, but tie in the drone stock first as you ...
- Sun Jun 04, 2017 8:37 pm
- Forum: Uilleann Pipe forum
- Topic: crowley/kennedy
- Replies: 7
- Views: 3917
Re: crowley/kennedy
Buy it back it's a bargain. They might throw in some steak knives and a pair of socksI'm sorry I ever sold that Crowley set.
- Thu Jun 01, 2017 5:19 pm
- Forum: Uilleann Pipe forum
- Topic: My set
- Replies: 5
- Views: 3868
Re: My set
I am seriously impressed The amount of thought and work that has gone into the new pipes..... (Sooo understated). I have just finished a set of pipes and have learned enough to make an improved model.I am constantly surprised by the combinations of chanters, reg, and drones not to mention reeds of a...
- Tue May 23, 2017 5:56 pm
- Forum: Uilleann Pipe forum
- Topic: Practice set to 1/2 set
- Replies: 6
- Views: 2975
- Mon May 22, 2017 8:32 pm
- Forum: Uilleann Pipe forum
- Topic: Bass bar to stock
- Replies: 9
- Views: 4714
Bass bar to stock
Ok I am fixing and fitting my regulators. So far the problem I am having is with the air flow from the hole in the reg baritone chamber from the stock too and through the brass bass tube. What is the ideal hole size? and do I allow a decent amount around the leather gaskets at the airway so I can al...
- Sun May 21, 2017 8:08 pm
- Forum: Uilleann Pipe forum
- Topic: Practice set to 1/2 set
- Replies: 6
- Views: 2975
Re: Practice set to 1/2 set
If you advertised as a half set they may have a point.Having said that I have 2 sets and both stocks are different in size so
to me the stock and drones should match and I would expect drones with a half set as opposed to a practice set with no stock cup
to me the stock and drones should match and I would expect drones with a half set as opposed to a practice set with no stock cup
- Fri May 12, 2017 6:15 pm
- Forum: Uilleann Pipe forum
- Topic: Flat/Concert
- Replies: 13
- Views: 5242
Re: Flat/Concert
All can be done with reeds, the bores matter for very little ! :party: I have made a number of chanters: One was a complete stuff up because I tried to step drill 4.0mm...70mm back from the reed end and made a mess I experimented by reaming and reeding the chanter. The result was not what I expecte...
- Mon May 08, 2017 4:58 pm
- Forum: Uilleann Pipe forum
- Topic: Michael Dow bellows
- Replies: 6
- Views: 2870
Re: Michael Dow bellows
Hi I wonder if you could explain your relationship between regulators an bellows. I am still about a year away before II decided to go with smaller (Kelleher) bellows because I found it easier to play regulators that way.
connect up regulators and every bit helps
Bryan
- Sun Apr 30, 2017 8:43 pm
- Forum: Uilleann Pipe forum
- Topic: crowley/kennedy
- Replies: 7
- Views: 3917
Re: crowley/kennedy
It has been removed well, well, well wonder what that was all about
- Sun Apr 30, 2017 6:41 pm
- Forum: Uilleann Pipe forum
- Topic: crowley/kennedy
- Replies: 7
- Views: 3917
crowley/kennedy
Looking at this ebay item and then further looking at the other items for sale I am confused with the selling technique. There are 2 sets of pipes 2 early martin guitars 2 early gibson 2 wheatstones and lots of other goodies. They have low bidding and all seem to have a $2.500 buy now . Maybe someon...
- Mon Apr 24, 2017 12:05 am
- Forum: Uilleann Pipe forum
- Topic: Reed Adjustment
- Replies: 3
- Views: 2377
Re: Reed Adjustment
Hi Mike I have made many reeds so I will pass on what I would do in your case: First the weak back D is a real worry and may be a chanter issue. Check for leaks on the side of the reeds or just rub some wax crayon on the sides to be sure. That said I always tune a reed starting with the back D so I ...
- Tue Apr 18, 2017 5:22 pm
- Forum: Uilleann Pipe forum
- Topic: Ebony for sale! Maybe!
- Replies: 5
- Views: 3455
Re: Ebony for sale! Maybe!
Hi James
From where will you be selling. Because of measuring in mm and inches. I am hoping it is Australia
As for pricing what did each billet cost?
Bryan
From where will you be selling. Because of measuring in mm and inches. I am hoping it is Australia
As for pricing what did each billet cost?
Bryan
- Fri Apr 14, 2017 11:46 pm
- Forum: Uilleann Pipe forum
- Topic: Second question - Lowering the pitch of Rowsome copies
- Replies: 18
- Views: 6117
Re: Second question - Lowering the pitch of Rowsome copies
Apparently that's his evil twin brotherAh, so nothing more recent than say this then
- Fri Apr 14, 2017 5:35 pm
- Forum: Uilleann Pipe forum
- Topic: Second question - Lowering the pitch of Rowsome copies
- Replies: 18
- Views: 6117
Re: Second question - Lowering the pitch of Rowsome copies
Ooooops wrong url I see this is posted. yup that's the one http://www.daye1.com/bagpage/makepipe/up_row_d.html Craig Fisher yes [img][https://imageshack.com/i/pnDNsbNEp/img] Looked at your link m4malious Lots of good info, it would not have made much sense before I made my first chanter but reading ...